Xiegu X-108G X108G Outdoor VERSION 0.5-30MHz 20W HF TRANSCEIVER QRP

Xiegu X-108G X108G Outdoor VERSION 0.5-30MHz 20W HF TRANSCEIVER QRP
Xiegu X-108G X108G Outdoor VERSION 0.5-30MHz 20W HF TRANSCEIVER QRP
Xiegu X-108G X108G Outdoor VERSION 0.5-30MHz 20W HF TRANSCEIVER QRP
Xiegu X-108G X108G Outdoor VERSION 0.5-30MHz 20W HF TRANSCEIVER QRP

Xiegu X-108G X108G Outdoor VERSION 0.5-30MHz 20W HF TRANSCEIVER QRP
X108G outdoor version is an. It is a single-conversion HF transceiver. In particular to optimize the receive channel , it has a lower local noise and higher signal to noise ratio, up 0.25uV & 12dB; the machine comes standard with a 2.3k SSB and CW filter 500Hz narrow-band filter, the filter excellent properties that dramatically improves the overall performance. The machine has a large dynamic range AGC control, so X108G when receiving various signals appear at ease; in addition, also has S meter, power meter standing, NB capabilities, to meet the daily needs of the operator. RF transmit channels using MOS pipe imports, the machine APC circuit to ensure the machine is kept constant RF output power level in each frequency band, but also according to actual needs, adjust the output power, and with a high VSWR protection. Overall performance indicators to meet the national standard, FCC (or CE) certification requirements. X108G outdoor version equipped with a color OLED solid state LCD screen, which allows you to clear outdoor viewing content displayed on the screen when you use; around all-aluminum handle configurations, to better protect the machine. Low noise, single-conversion superheterodyne receiver. Double-balanced diode mixers provide excellent dynamic range. Receiving sensitivity: 0.25uV (preamplifier open, > 1.8MHz band). Narrow double-tuned band-pass filter covering the realization of all amateur bands (WARC bands). Built NC APC circuit, the transmission power constant, high control accuracy. Standard 0.5ppm TCXO circuit of high-quality clock source. Narrowband standard 500Hz CW filter. Frequency Range: Receive: 0.5 30MHz. Emissions: All HAM bands. Work mode: SSB (J3E). The minimum frequency step: 1Hz. Operating temperature range: -10 + 60. Operating voltage: 12 14.5V DC. Current parameters: reception 600mAMax. Machine size: 120 45 180 (mm) [not including knobs, handles, and other prominent]. Mode: SSB balanced modulator. Selective: SSB 2.4kHz (-6dB). IF frequency: 10.7MHz. Receiving sensitivity: 0.5uV (PRE ON, 2.0MHz). 0.3uV (PRE ON, > 2.0MHz). 1.8 2.0MHz. 3.5 4.0MHz. 5.0 5.5MHz. 7.0 7.3MHz. 10.0 10.2MHz. 14.0 14.5MHz. 18.0 18.2MHz. 21.0 21.6MHz. 24.8 25.0MHz. 28.0 28.8MHz. 0.5 30.0MHz. Dynamic range: better than 90dB. RIT frequency tuning range: ± 1kHz. The images shown are not the actual item and are for your reference only. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. There are NO EXCEPTIONS! OR, you may choose to have a replacement. In Appreciation of Your Feedback. The item “Xiegu X-108G X108G Outdoor VERSION 0.5-30MHz 20W HF TRANSCEIVER QRP” is in sale since Wednesday, June 22, 2016. This item is in the category “Mobile Phones & Communication\Radio Communication Equipment\Ham/Amateur Radio\Ham Radio Transceivers”. The seller is “flyxy2015″ and is located in Shen Zhen. This item can be shipped worldwide.
  • Brand: Xiegu
  • MPN: Does Not Apply

Xiegu X-108G X108G Outdoor VERSION 0.5-30MHz 20W HF TRANSCEIVER QRP