ICOM_IC_7000_HF_VHF_UHF_Transceiver_and_Accessories_01_lyg

ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories

ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories
ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories
ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories
ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories
ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories
ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories
ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories
ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories
ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories
ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories
ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories
ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories

ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories
The IC-7000, serial number 0502123, works well as a mobile or base station on amateur bands 1.8MHz through 70 cm (excluding 222 MHz band). Power output is 2 to 100 watts on HF and 6m, 50 watts maximum on 2 meters and 35 watts maximum on 430MHz. The radio has a built in RTTY receive decoder. The receive coverage is 30 kHz to 199.9 MHz and 400 to 470 MHz. More detailed specifications of the IC-7000 are available on the Internet. This IC-7000 is a stock radio with no mods. The radio was last used for several years as a 5 watt exciter for a 2 meter amplifier, and three times for portable operation on CW, SSB, RTTY, PSK31; performing on all modes flawlessly. Downsizing requires that it be passed on to a new owner. After purchasing the radio, the cooling fan operated intermittently and it was professionally serviced to replace the internal fan controller chip; a complete check of the radio was then done to make sure it operates within ICOM specs. The photo of the rear of the radio shows some wear on the rear edge of the case; otherwise, the case is flawless. The display window has no scratches or dings. Included in the sale are. IC-7000 HF/VHF/UHF all mode transceiver, s/n 0502123. DC power cable with barrel holders for 30A 3AG fuses. RT Systems® USB-RTS01 USB cable for computer control of the IC-7000. ICOM HM-151 hand mic and mic hanger. ICOM SM-6 desk mic. OPC-589 8-pin round to RJ-45 adapter for use with the SM-6 desk mic and IC-7000. OPC-1443 (11.5) separation cable (new) with screws. Spare ACC socket plug. (2) 30A 3AG spare fuses. (1) 4A spare fuse. MB-105 Mobile mounting bracket (new in box). MB-62 Mobile bracket (new in box). MB-120 Mobile base (new in box). LDG® AT-7000 automatic antenna tuner with control cable for the IC-7000 transceiver. I have no manual for it. These next two cables are included and are meant to be used with an external sound card such as the SignaLink® USB for PSK31, FT8, and other similar digital modes. SLCAB-131 cable used with a USB SignaLink® to the radios ACC socket. Cable for use with a USB SignaLink® to the radios DATA socket. The accessories will be included in the main container. The item “ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories” is in sale since Thursday, April 18, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “kv1e” and is located in Muscatine, Iowa. This item can be shipped to United States.
  • Brand: Icom
  • Supported Modes: AM
  • Modified Item: No
  • Model: IC-7000
  • Modification Description: None
  • Band: HF

ICOM IC-7000 HF/ VHF/ UHF Transceiver and Accessories