expert

Expert Electronics MB1 HF 6/2m transceiver 100W SDR with ATU 16 bit ADC PREORDER

Expert Electronics MB1 HF 6/2m transceiver 100W SDR with ATU 16 bit ADC PREORDER
Expert Electronics MB1 HF 6/2m transceiver 100W SDR with ATU 16 bit ADC PREORDER
Expert Electronics MB1 HF 6/2m transceiver 100W SDR with ATU 16 bit ADC PREORDER
Expert Electronics MB1 HF 6/2m transceiver 100W SDR with ATU 16 bit ADC PREORDER
Expert Electronics MB1 HF 6/2m transceiver 100W SDR with ATU 16 bit ADC PREORDER

Expert Electronics MB1 HF 6/2m transceiver 100W SDR with ATU 16 bit ADC PREORDER
Limited-time offer, excellent price! Current ETA is 8-10 weeks as of June 27, 2017. You purchasing MB1 transceiver from US-based authorized Expert Electronics dealer. Assembled in Taiwan R. Many radio amateurs use PC with the classic analog transceiver. Connection between computer and radio requires USB cable and other interfaces. SDR MB1 transceiver elegantly solves connections problem. The HF 6m and 2m DUC/DDC transceiver MB1 – this is a new generation of amateur radio. Transceiver combines a classic design, accumulated over many decades, with the most advanced DUC/DDC SDR-technologies – direct conversion and synthesis of radio signals, and full-featured modern computer with a Intel Core i5 CPU. Operator receives a fully functional workstation in one case, which is started by pressing just a one button. All the peripherals connections are internal with virtual audio cables and COM ports; Simply connect second monitor, mouse, keyboard and you may control radio with knobs and buttons from the transceiver’s front panel. ADC with sample rate 160 MHz and 16 bit resolution. Two independent receive channels with bandwidth of 312 kHz. Record air stations with the bandwidth up to 312 kHz and an opportunity to reproduce it later. Broad band view up to 80 MHz. High quality audio DAC with the precision 24 bit fro decreasing signal delays. Quality IPS 7 display with the resolution 1280×800. Connector for controlling external devices, 8 programmable transistor switches. Interface with PC LAN 100 Mbps. AC voltage 220/110V, current consumption up to 3 Amp. Input of the external reference oscillator with the frequency 10 MHz. Small dimensions and lightweight. ExpertSDR2 software in two versions, for desktop and for mono-block. Opportunity to set any other software by User. Independent receive path with Digital Direct Conversion(DDC). Separate independent transmit path with Digital Up Conversion(DUC). Full duplex or half duplex mode. Two independent receiver channels with bandwidth up to 312 kHz and two sub-receivers in each channel. Antenna switch for two HF antennas. Connector for control of external devices, 7 powerful switches with open collector. Connector for connecting of mobile antenna. Automatic Tuner Unit for HF band: Available as an option. ALC input for connecting external power amplifier. Four programmable PTT outputs for independent external PA control. COM port for connecting external devices power amplifiers, rotators, external PC etc. Opportunity to insert BPF in HF front-end via RX IN and RX OUT connectors. Embedded sub-octave band pass filters. Opportunity to connect VHF transverters. Using transceiver as a receiver for measurements. Using transceiver as a signal generator (output DAC OUT). Frequency synchronization from 10 MHz reference oscillator. Very small delay in CW mode (about 10 msec). Opportunity to use transceiver in SO2R mode. Opportunity of remote control. PTT foot switch and CW key are connected to E-Coder SDR-control panel. Headset and E-Coder panel are connected to remote PC. Full duplex mode is supported by the transceiver’s hardware, but is not done software yet. This mode will be supported in the future releases of the ExpertSDR2 software. MB1 also has a full scale computer on the basis of Intel Core i5 processor, which provides the following opportunities. Install digital communications software. Contest loggers and magazines. Connecting two CW Skimmers to two independent receiving channels on different bands. Opportunity to connect transceiver to LAN or WAN Internet. Viewing and listening audio and video files. Watching TV via USB-TV receivers. Opportunity to connect external display, mouse and keyboard. And many other opportunities limited only by your fantasy. All that inside one MB1 transceiver. Embedded PC’s parameters. Mother board of thin Mini-ITX Form Factor. CPU Intel Core i5 2.8GHz. SSD disk drive, 120GB. 4 ports USB3.0 at the rear panel and 2 ports USB 2.0 at the front panel of the transceiver. HDMI and D-PORT for connecting external monitors. Full-function amateur radio transceiver. Remote receipt point for the contests and other applications. Spectrum analyzer with the bandwidth up to 80MHz. Work with the external programs of digital connection types, CW skimmer, etc. A version of ExpertSDR2 software with adapted GUI for 7 display was specially developed for the MB1 transceiver. At the present time software works in RX/TX mode and supports two independent receiving channels with the bandwidth up to 312 kHz. A DSP library developed by Expert Electronics allowed to improve receiving quality and increase stability of the software. Two OS are supported: Windows 8/10 and Linux Ubuntu. Transceiver includes Automatic Tuner Unit (ATU) for matching the antennas with 50 Ohm transceiver’s output path. LAN-cable for connection to external LAN. Power supply cable for connecting the transceiver to AC. Two audio adapters JACK 6.3 mm to JACK 3.5 mm for connecting of headset to the transceiver. Software can be downloaded from our web-site. In addition to main complete set following accessories available. Computer headset EE-PH-01 with electret microphone. PTT foot switch EE-CP-02. SDR-control panel E-Coder EE-EP-01 or SDR-control panel mini kit EE-EP-02, for comfortable remote work. Receive path’s construction principle. Direct conversion of radio signals. RF ADC clock frequency, MHz. RF ADC resolution, bit. Receiving frequencies bandwidth, MHz. Maximum displaying spectrum width, MHz. Amount of independent receive channels. Blocking Dynamic Range (BDR), dB. Dynamic Range over IMD3, dB. Image channel rejection, dB. Local oscillator’s stability, ppm. 20, -10, 0, +10. Additional preamplifier on VHF, dB. Direct synthesis of radio signal. RF DAC clock frequency, MHz. RF DAC resolution, bit. All amateur HF bands, 6m and 2m. Maximum output power in HF frequency band under IMD3 = -30 dB, W. Maximum output power in VHF frequency band under IMD3 = -30 dB, W. Power voltage range, V, Hz. The Expert Electronics MB1 transceiver complies with FCC Part 97 rules for the Amateur Radio Service. The item “Expert Electronics MB1 HF 6/2m transceiver 100W SDR with ATU 16 bit ADC PREORDER” is in sale since Sunday, February 05, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “nsi-new” and is located in Kirkland, Washington. This item can be shipped worldwide.
  • Type: Base Station
  • Brand: Expert Electronics
  • Model: Expert Electronics MB1
  • Frequency Band(s): HF
  • Supported Modes: AM
  • Country/Region of Manufacture: Taiwan
  • MPN: Does Not Apply
  • Band Plan: All HF, 6m and 2m
  • Mono/Multi Band: Multi Band HF 6m and 2m

Expert Electronics MB1 HF 6/2m transceiver 100W SDR with ATU 16 bit ADC PREORDER

More from expert