Tag Archives: dr-1x

YAESU DR-1X System Fusion Repeater Digital & Analog icom C4FM 2M / 440

YAESU DR-1X System Fusion Repeater Digital & Analog icom C4FM 2M / 440
YAESU DR-1X System Fusion Repeater Digital & Analog icom C4FM 2M / 440
YAESU DR-1X System Fusion Repeater Digital & Analog icom C4FM 2M / 440
YAESU DR-1X System Fusion Repeater Digital & Analog icom C4FM 2M / 440
YAESU DR-1X System Fusion Repeater Digital & Analog icom C4FM 2M / 440
YAESU DR-1X System Fusion Repeater Digital & Analog icom C4FM 2M / 440
YAESU DR-1X System Fusion Repeater Digital & Analog icom C4FM 2M / 440
YAESU DR-1X System Fusion Repeater Digital & Analog icom C4FM 2M / 440

YAESU DR-1X System Fusion Repeater Digital & Analog icom C4FM 2M / 440
DR-1X Repeater VHF and UHF. Digital C4FM and Analog FM. YAESU DR-1X 144/430 Dual Band C4FM/FM Digital Repeater. The YAESU DR-1X is a digital/conventional FM dual mode repeater that covers the VHF and UHF amateur radio bands. It was developed for use with System Fusion. Replacing your conventional FM repeater with the DR-1X will provide continued use of conventional FM communication while integrating the use of digital communication functions through its unique AMS capability. Is the final release of our popular DR-1 repeater that was released for Beta testing earlier this year. The DR-1X includes several hardware and software changes that improve reliability and external interfacing capabilities. The repeater controller, receiver and transmitter are all packaged into a 19 standard cabinet rack mount panel unit for simple replacement of an existing repeater. Existing peripheral devices such as the duplexer and amplifier, etc. Can continue to be used as-is. Please see the DR-1X Brochure and Manual for installation examples of Repeater Set-Up replacing existing Analog FM Repeater. ·Modulation Modes: Conventional FM, 12.5 kHz C4FM Digital (V/D Mode, VFR Mode, DFR Mode) ·VHF or UHF operation (cross-band capable) ·AMS (Automatic Mode Select) function automatically recognizes the signal as C4FM digital or conventional FM, and then the DR-1X repeater retransmits the signal using the preset communications mode. ·3.5-inch Full Color Touch Panel Operation ·Extremely reliable, high RF Output Power: 50W/20W/10W ·Emergency Operation: Supports auto-switched backup battery power operation. ·Front panel microphone connector is provided for use in repeater transmitter testing, and enables use as a base station. ·Built-in large-size monitor speaker with front panel volume control ·Full Integrability with existing repeater controllers using the 15 Pin rear I/O connection. System Fusion is not compatible with the D-STAR GMSK digital format. The large front panel, color touch-screen permits convenient configuration of the transmitter and receiver frequencies, transmit power output and AMS functions. When the settings are complete the display can be switched off to prevent accidental operation. Simply turn the display switch ON and use the touch panel screen to confirm or change settings. The transmit and receive frequencies, CTCSS tones, squelch, AMS, and other functions are configured by the touch panel screen. Enjoy the ease of using the DR-1X 3.5-inch Full Color Touch Panel Operation: Setup screen Frequency setting screen CTCSS setting screen. ·Internal AC Power Supply ·19 Rack Mount Capable ·High Stability ±2.5ppm TCXO included ·DSQ (Digital Squelch Code) Signaling Feature ·CTCSS and DCS Signaling Feature ·ID Announcement Feature ·Remote/External Controller Interface ·Base Station Operation ·Time Out Timer ·Firmware Upgradeable. ·AC Cable ·DC Cable for backup battery ·PC Connection Cable SCU-20 ·Rubber Feet (4). ·DTMF Microphone MH-48A6JA ·Hand Microphone MH-42C6J ·Voice Guide Unit FVS-2. Frequency range 144 to 148 MHz, 430 to 450 MHz Channel steps 5/6.25 kHz Emission type F1D, F2D, F3E, F7W Frequency stability ±2.5 ppm -4°F to +140°F (-20°C to +60°C) Antenna impedance 50 ohms Supply Voltage AC 100 to 240 V DC 11.7 to 15.8 V, negative ground Current consumption: 1.5 A (Receive) 13 A (50 W TX, 144 MHz band) 14 A (50 W TX, 430 MHz band) Operating temperature -4°F to +140°F (-20°C to +60°C) Dimensions: 19″(W) × 3.5″(H) × 15(D) Weight : 22.05 lbs (10 kg) approximately Transmitter RF power output 50/20/5 W Modulation type F1D, F2D, F3E Variable Reactance Modulation F7W 4FSK (C4FM) Spurious emission At least 60 dB below Receiver Circuit type Double conversion super-heterodyne Intermediate frequencies 1st: 47.25 MHz, 2nd: 450 kHz Receiver sensitivity 0.3. V (Digital 2 m/70 cm) BER 1% 0.2. V (FM 2 m/70 cm) 12dB SINARD Adjacent Channel Selectivity Better than 65 dB TYP (20 kHz offset) Selectivity FM 12 kHz/35 kHz (-6 dB/-60 dB) Intermodulation Better than 65 dB TYP (20 /40 kHz offset) Audio output 4 W 4ohm. THD 10%, 13.8 V; internal speaker. The item “YAESU DR-1X System Fusion Repeater Digital & Analog icom C4FM 2M / 440″ is in sale since Saturday, May 13, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “radioaficionado-1″ and is located in Lowell, Massachusetts. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Qatar, Croatia, Colombia.
  • Frequency Band(s): VHF
  • Type: Base Station
  • Brand: Yaesu
  • Supported Modes: Digital
  • Mono/Multi Band: Dual Band
  • Band Plan: 2 metros / 440mhz
  • Country/Region of Manufacture: Japan
  • Model: DR-1X

YAESU DR-1X System Fusion Repeater Digital & Analog icom C4FM 2M / 440