Tag Archives: withreal-time

NEW_ICOM_IC_7300_HF_6M_100W_Ham_Mobile_Station_Radio_withReal_Time_Spectrum_Scope_01_bbs

NEW ICOM IC-7300 HF+6M 100W Ham Mobile/Station Radio withReal-Time Spectrum Scope

NEW ICOM IC-7300 HF+6M 100W Ham Mobile/Station Radio withReal-Time Spectrum Scope
NEW ICOM IC-7300 HF+6M 100W Ham Mobile/Station Radio withReal-Time Spectrum Scope
NEW ICOM IC-7300 HF+6M 100W Ham Mobile/Station Radio withReal-Time Spectrum Scope

NEW ICOM IC-7300 HF+6M 100W Ham Mobile/Station Radio withReal-Time Spectrum Scope
ICOM IC-7300 Radio The Innovative HF/50 Transceiver with High Performance Real-Time Spectrum Scope. The IC-7300 comes with. IC-7300 Radio Transceiver new in box. DC power cable, plugs and spare fuses. Printed Basic Manual, CD with Basic and Full Manual in English. IC-7300 – The Innovative HF Transceiver with High Performance Real-Time Spectrum Scope. Class Leading Real-Time Spectrum Scope. The IC-7300’s real-time spectrum scope is class-leading in resolution, sweep speed and dynamic range. While listening to received audio, you can check the real-time spectrum scope and quickly move to an intended signal. When you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune. Real-Time Spectrum Scope Specifications. Number of pixels shown at the 60dB level, when receiving a signal. Spectrum scope + Waterfall. The combination of the waterfall function and the real-time spectrum scope assists in maximum receive performance of the IC-7300 and increases QSO opportunities without missing weak signals. The waterfall function shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the spectrum scope. Spectrum scope + Waterfall (expand). The audio scope function can be used to observe various AF characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Either the transmit or receive audio can be displayed on the FFT scope with the waterfall function and the oscilloscope. FFT scope/Oscilloscope + Waterfall. RF Direct Sampling System. The IC-7300 employs an RF direct sampling system. RF signals are directly converted to digital data and processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction. This system is a leading technology making an epoch in amateur radio. The new “IP+” function improves 3rd order intercept point (IP3) performance. When a weak signal is received adjacent to strong interference, the AD converter is optimized against signal distortion. Class Leading RMDR and Phase Noise Characteristics. The IC-7300’s RMDR is improved to about 97dB (typical value) and Phase Noise characteristics are improved about 15dB (at 1 kHz frequency separation) compared to the IC-7200. The superior Phase Noise characteristics reduce noise components in both receive and transmit signals. At 1 kHz frequency separation (received frequency: 14.2MHz, MODE: CW, IF BW: 500Hz). 15 Discrete Band-Pass Filters. The IC-7300 has 15 discrete RF bandpass filters. The RF signal is only passed through one of the bandpass filters, while any out of range signals are rejected. High Q factor coils are used to minimize the loss in the RF band-pass filters. Built-In Automatic Antenna Tuner. The antenna tuner memorizes its settings based on your transmit frequency, so that it can rapidly tune when you change operating bands. The Enforced Tuning function allows a wide range of temporary antennas to be tuned. Do not use the Enforced Tuning function except in case of an emergency. Transmission power may be reduced. Multi-Dial Knob for Smooth Operation. The combination of the multi-dial knob and the touch screen offers quick and smooth operation. When you push the multi-dial knob, menu items are shown on the right side of the display. You can select an item with a touch of the screen and adjust levels by turning the multi-dial knob. Large Touch Screen Color TFT LCD. The large 4.3 inch color TFT touch LCD offers intuitive operation. Using the software keypad of the touch screen, you can easily set various functions and edit memory contents. Band stacking register screen. Memory name input operation. To offer superior sound quality, a new speaker unit has been incorporated and is allocated dedicated space in the aluminum die-cast chassis. Newly designed speaker unit. SD Memory Card Slot for Saving Data. SD memory card slot. The SD card is not included. The IC-7300 can store various content on an SD card such as received and transmitted audio, voice memories, RTTY/CW memories, RTTY decode logs and captured screen images. Personal and firmware update data can also be stored on the SD card for easy setting. New HM-219 hand microphone supplied. A large and effective cooling fan system. 101 memory channels (99 regular, 2 scan edges). Optional RS-BA1 IP remote control software (the spectrum scope with the waterfall can be observed). CW functions: Full break-in, CW reverse, CW auto tuning. The item “NEW ICOM IC-7300 HF+6M 100W Ham Mobile/Station Radio withReal-Time Spectrum Scope” is in sale since Sunday, March 24, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “palacemuseum” and is located in Taipei Taiwan. This item can be shipped worldwide.
  • UPC: 731797024763
  • Model: IC-7300
  • Frequency Band(s): HF
  • Band Plan: 6 Meters
  • Country/Region of Manufacture: Japan
  • Brand: Icom
  • Type: Base Station
  • Supported Modes: CW
  • Band: HF
  • Custom Bundle: No
  • MPN: IC7300

NEW ICOM IC-7300 HF+6M 100W Ham Mobile/Station Radio withReal-Time Spectrum Scope