https://hamradiotransceiver.biz Wed, 17 Jun 2026 17:35:44 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2017/05/ic-7000-hfvhfuhf-transceiver-in-real-nice-shape-a-shack-in-the-box/ https://hamradiotransceiver.biz/2017/05/ic-7000-hfvhfuhf-transceiver-in-real-nice-shape-a-shack-in-the-box/#comments Sun, 21 May 2017 10:22:46 +0000 http://hamradiotransceiver.biz/2017/05/ic-7000-hfvhfuhf-transceiver-in-real-nice-shape-a-shack-in-the-box/ read more]]>













ICOM IC 7000 Nice Cond. 20 Watts output on 440 mhz +/- Comes with new 440 Mhz PA (Not installed), Icom 7000 Owners Manual, Icom 7000 Nifty spiral bound mini-manual, AB5N HM 151 Mic mod, Icom MB-62 Mobile Mounting Bracket, Icom MB-105 IC-7000 head mounting bracket, Icom OPC-1443 Front Panel Separation Cable 11 foot, Icom OPC-1457 DC Power cord , All bolts, screws, plugs, etc. That came with rig when new. Not seen in pictures One RT Systems USB to 3.5mm plug cable to hook up, Any PC etc. The item “IC-7000 HF/VHF/UHF Transceiver in Real Nice Shape. A Shack in the box” is in sale since Saturday, May 20, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “bunnsbunns” and is located in Watertown, Connecticut. This item can be shipped to United States.

• Brand: Icom
• Model: ic-7000
• Frequency Band(s): HF
• Supported Modes: Built in Rtty decoder
• Product Type: Transceivers

]]> https://hamradiotransceiver.biz/2017/05/ic-7000-hfvhfuhf-transceiver-in-real-nice-shape-a-shack-in-the-box/feed/ 0 https://hamradiotransceiver.biz/2017/05/ic-7000-hfvhfuhf-transceiver-excellent-with-mount-and-seperation-cable/ https://hamradiotransceiver.biz/2017/05/ic-7000-hfvhfuhf-transceiver-excellent-with-mount-and-seperation-cable/#comments Tue, 09 May 2017 09:22:21 +0000 http://hamradiotransceiver.biz/2017/05/ic-7000-hfvhfuhf-transceiver-excellent-with-mount-and-seperation-cable/ read more]]>










This is for an ICOM IC-7000 All band- All mode Transceiver in EXCELLENT CONDITION. It was only used in the car for about 10 hours total time. There are a couple of light hairline scratches on the front panel that are barely noticeable and are not noticeable at all when the radio is on. It does not affect the operation at all. It comes with the radio mount that I had velcroed to the floor and the remote cable. I used a mount that goes into the cd player for the control head. If you want it with the radio I can include it. It also comes with a short power cable and the operation manual. I can’t find the original box. If It doesn’t turn up it will be packed very well. The item “IC-7000 HF/VHF/UHF Transceiver Excellent with Mount and Seperation Cable” is in sale since Monday, May 08, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hamradiohardware” and is located in Tinley Park, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Taiwan, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, New Zealand, Singapore, Switzerland, Norway, Qatar, Croatia.

• Brand: Icom
• Model: ic-7000
• Frequency Band(s): HF
• Supported Modes: AM
• Product Type: Transceivers
• Country/Region of Manufacture: Unknown
• Mono/Multi Band: All Band/All Mode

]]> https://hamradiotransceiver.biz/2017/05/ic-7000-hfvhfuhf-transceiver-excellent-with-mount-and-seperation-cable/feed/ 0 https://hamradiotransceiver.biz/2017/05/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box-3/ https://hamradiotransceiver.biz/2017/05/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box-3/#comments Wed, 03 May 2017 20:08:15 +0000 http://hamradiotransceiver.biz/2017/05/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box-3/ read more]]>










Icom IC-7000 in Beautiful shape in the Original box. With the Original manual, Original microphone, Original power cord, and extra plug/fuses. Face and cabinet are in Beautiful shape shape, a Great radio that does it all: The technical properties and advantages of IF DSP found in our leading base station models now offers its superior advantages on mobile HF, 50MHz, 144MHz and 430/440MHz bands. IF DSP First in its class. Digital IF filter, manual notch filter, digital twin PBT and more. The latest digital features are incorporated in this compact radio from two DSP chips that deliver superior processing performance. Of course, those features work on all ham bands, from HF to the 70cm band. AGC loop performance controlled by DSP. You will never experience AGC pumping from a signal filtered out by the DSP system. The digital IF filter and manual notch filter are inside the AGC loop, so you will not encounter AGC blocking. The AGC time constants are flexibly adjustable from slow, middle, fast (or AGC-off) for each operating mode. All the filters you want at your fingertips! Filters as the IC-7000 has adjustable digital filters. You just dial in the width you want and select whether you want a sharp or soft filter shape for SSB and CW modes. Then to pull-in the the weak ones, with a quick turn of the concentric twin PBT knobs, you can either narrow the IF passband, or shift the entire passband to eliminate the QRM. 2-point MNF (Manual notch filter). Pull out the weak signals in crowded band conditions with Icoms NEW two-point MNF (manual notch filter). Apply 70 dB of rejection to two signals at once! Notch width is adjustable wide, medium, and narrow and an auto-tuning notch filter is available, too. Noise reduction reduces background noise and improves signal-to-noise ratio. The noise reduction level is adjustable in 16 steps. It improves the readability of voice and data signals. The noise blanker reduces pulse-type noise such as engine ignition and sparking. The NB level and width (blanking duration) are adjustable in 100 steps. High power MOS-FET amps supply 35W output power on 430/440MHz band as well as 100W on HF/50MHz bands and 50W on 144MHz. It provides stable, high quality output with low IMD and low spurious emissions even during high duty cycle and extended operation. High stability crystal unit. The IC-7000 incorporates a high-stability master oscillator, providing 0.5ppm (0°C to +50°C). A must for data mode operation. DDS (Direct digital synthesizer) circuit. Icoms original DDS (Direct digital synthesizer) circuit improves the C/N ratio, providing a clear, clean transmit signal in all bands. Compact, all in one package. The IC-7000 sheds 20mm (25/32 in) of depth compared with the IC-706MKIIG. Its compact body is easy for carrying outdoors or mobile operation. Eight of the most-used radio functions such as NB, NR, MNF, and ANF are controlled by dedicated function keys grouped around the display for easy visibility. One quick touch turns the function on and off. A longer touch activates adjustment of the functions setting. Digital voice recorder (DVR). Record your callsign, CQ, or other information in 4 transmit playback memories with alphanumeric labels. A total of 90 seconds is available for the four memories. A front panel REC control allows you to record incoming signals for up to 25 minutes (99 channels). The DVR makes portable contesting or mini-expeditions a breeze! Up to 120 seconds per channel. The RTTY demodulator and decoder are built-in. External units and PC are no longer required for decoding. The twin peak audio filter reduces interfering signals overlapping the tones and the tuning indicator helps you zero-in with accurate tuning. Remote control microphone, HM-151. The HM-151 has a 10-keypad for quick channel selection. The triple band tacking register memorizes the last three frequencies and modes used on each band. Push the band button once to three times to recall the channel setting. The F-1 and F-2 buttons are programmable as shortcut menus of your often used functions. 2.5 inch color TFT display. The 2.5 inch color TFT display presents numbers and indicators in bright, concentrated colors for easy recognition. You can choose from 3 background colors and 2 font styles to suit your preference, in addition to a large operating frequency readout. And more, the Video output jack on the rear panel allows you to view a magnified display on an external monitor. 3.5(d) mm monaural cable is required for connection. SSB transmit bandwidth adjustable. The SSB transmit bandwidth is selectable from 100, 200, 300, 500Hz at the high-pass edge, and 2500, 2700, 2800, 2900Hz at the low-pass edge respectively. 3 types of high and low combinations can be set in the quick set mode. The band scope function lets you watch conditions around the band and visually assists in finding other stations. In center mode the band scope range is centered on the receiving frequency (±10kHz to ±250kHz). In Fixed mode the band scope sweeps a fixed range. Multi function meter and SWR graphic display. The IC-7000 displays power level, SWR, ALC and compression level of the speech compressor. The SWR graphic display is useful for tuning antennas. The measuring step is selectable from 10/50/100/500kHz steps and the number of measuring steps is adjustable from 3 to 13 steps. Front panel separation with optional 3.5m/5m separation cable (not included). RF speech compressor controlled by the DSP. Tone squelch in FM mode. Built-in voice synthesizer announces operating frequency, mode and signal strength. Duplex mode and automatic repeater function. Thermo control silent cooling fan. Noise squelch and S-meter squelch. The item “IC-7000 HF/VHF/UHF Transceiver in Beautiful shape in the box” is in sale since Monday, May 01, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hamguy123″ and is located in Hollywood, Florida. This item can be shipped to United States.

• Brand: Icom
• Model: ic-7000
• Frequency Band(s): HF
• Supported Modes: AM
• Product Type: Transceivers

]]> https://hamradiotransceiver.biz/2017/05/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box-3/feed/ 0 https://hamradiotransceiver.biz/2017/03/ic-7000-hfvhfuhf-transceiver-excellent-shape-in-box-later-model/ https://hamradiotransceiver.biz/2017/03/ic-7000-hfvhfuhf-transceiver-excellent-shape-in-box-later-model/#comments Thu, 09 Mar 2017 14:57:32 +0000 http://hamradiotransceiver.biz/2017/03/ic-7000-hfvhfuhf-transceiver-excellent-shape-in-box-later-model/ read more]]>









Later model Icom IC-7000 in Excellent shape in the Original box. With the Original manual, Original Quick Menu guide, Original microphone WITH AB5N mod, Original power cord, and extra plug/fuses. Also has the MB-106 side carry handle installed and as mentioned has the AB5N mod done to the microphone for superior audio. Face and cabinet are in Excellent shape shape, a Great radio that does it all: The technical properties and advantages of IF DSP found in our leading base station models now offers its superior advantages on mobile HF, 50MHz, 144MHz and 430/440MHz bands. IF DSP First in its class. Digital IF filter, manual notch filter, digital twin PBT and more. The latest digital features are incorporated in this compact radio from two DSP chips that deliver superior processing performance. Of course, those features work on all ham bands, from HF to the 70cm band. AGC loop performance controlled by DSP. You will never experience AGC pumping from a signal filtered out by the DSP system. The digital IF filter and manual notch filter are inside the AGC loop, so you will not encounter AGC blocking. The AGC time constants are flexibly adjustable from slow, middle, fast (or AGC-off) for each operating mode. All the filters you want at your fingertips! Filters as the IC-7000 has adjustable digital filters. You just dial in the width you want and select whether you want a sharp or soft filter shape for SSB and CW modes. Then to pull-in the the weak ones, with a quick turn of the concentric twin PBT knobs, you can either narrow the IF passband, or shift the entire passband to eliminate the QRM. 2-point MNF (Manual notch filter). Pull out the weak signals in crowded band conditions with Icoms NEW two-point MNF (manual notch filter). Apply 70 dB of rejection to two signals at once! Notch width is adjustable wide, medium, and narrow and an auto-tuning notch filter is available, too. Noise reduction reduces background noise and improves signal-to-noise ratio. The noise reduction level is adjustable in 16 steps. It improves the readability of voice and data signals. The noise blanker reduces pulse-type noise such as engine ignition and sparking. The NB level and width (blanking duration) are adjustable in 100 steps. High power MOS-FET amps supply 35W output power on 430/440MHz band as well as 100W on HF/50MHz bands and 50W on 144MHz. It provides stable, high quality output with low IMD and low spurious emissions even during high duty cycle and extended operation. High stability crystal unit. The IC-7000 incorporates a high-stability master oscillator, providing 0.5ppm (0°C to +50°C). A must for data mode operation. DDS (Direct digital synthesizer) circuit. Icoms original DDS (Direct digital synthesizer) circuit improves the C/N ratio, providing a clear, clean transmit signal in all bands. Compact, all in one package. The IC-7000 sheds 20mm (25/32 in) of depth compared with the IC-706MKIIG. Its compact body is easy for carrying outdoors or mobile operation. Eight of the most-used radio functions such as NB, NR, MNF, and ANF are controlled by dedicated function keys grouped around the display for easy visibility. One quick touch turns the function on and off. A longer touch activates adjustment of the functions setting. Digital voice recorder (DVR). Record your callsign, CQ, or other information in 4 transmit playback memories with alphanumeric labels. A total of 90 seconds is available for the four memories. A front panel REC control allows you to record incoming signals for up to 25 minutes (99 channels). The DVR makes portable contesting or mini-expeditions a breeze! Up to 120 seconds per channel. The RTTY demodulator and decoder are built-in. External units and PC are no longer required for decoding. The twin peak audio filter reduces interfering signals overlapping the tones and the tuning indicator helps you zero-in with accurate tuning. Remote control microphone, HM-151. The HM-151 has a 10-keypad for quick channel selection. The triple band tacking register memorizes the last three frequencies and modes used on each band. Push the band button once to three times to recall the channel setting. The F-1 and F-2 buttons are programmable as shortcut menus of your often used functions. 2.5 inch color TFT display. The 2.5 inch color TFT display presents numbers and indicators in bright, concentrated colors for easy recognition. You can choose from 3 background colors and 2 font styles to suit your preference, in addition to a large operating frequency readout. And more, the Video output jack on the rear panel allows you to view a magnified display on an external monitor. 3.5(d) mm monaural cable is required for connection. SSB transmit bandwidth adjustable. The SSB transmit bandwidth is selectable from 100, 200, 300, 500Hz at the high-pass edge, and 2500, 2700, 2800, 2900Hz at the low-pass edge respectively. 3 types of high and low combinations can be set in the quick set mode. The band scope function lets you watch conditions around the band and visually assists in finding other stations. In center mode the band scope range is centered on the receiving frequency (±10kHz to ±250kHz). In Fixed mode the band scope sweeps a fixed range. Multi function meter and SWR graphic display. The IC-7000 displays power level, SWR, ALC and compression level of the speech compressor. The SWR graphic display is useful for tuning antennas. The measuring step is selectable from 10/50/100/500kHz steps and the number of measuring steps is adjustable from 3 to 13 steps. Front panel separation with optional 3.5m/5m separation cable (not included). RF speech compressor controlled by the DSP. Tone squelch in FM mode. Built-in voice synthesizer announces operating frequency, mode and signal strength. Duplex mode and automatic repeater function. Thermo control silent cooling fan. Noise squelch and S-meter squelch. The item “IC-7000 HF/VHF/UHF Transceiver Excellent shape in box- Later model” is in sale since Tuesday, March 07, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hamguy123″ and is located in Hollywood, Florida. This item can be shipped to United States.

• Brand: Icom
• Model: ic-7000
• Frequency Band(s): HF
• Supported Modes: AM
• Product Type: Transceivers

]]> https://hamradiotransceiver.biz/2017/03/ic-7000-hfvhfuhf-transceiver-excellent-shape-in-box-later-model/feed/ 0 https://hamradiotransceiver.biz/2017/01/ic-7000-hfvhfuhf-transceiver-excellent-shape-in-box-with-monitor-uhf-20-watts/ https://hamradiotransceiver.biz/2017/01/ic-7000-hfvhfuhf-transceiver-excellent-shape-in-box-with-monitor-uhf-20-watts/#comments Fri, 27 Jan 2017 19:30:08 +0000 http://hamradiotransceiver.biz/2017/01/ic-7000-hfvhfuhf-transceiver-excellent-shape-in-box-with-monitor-uhf-20-watts/ read more]]>










Please note: UHF is 20 watts output which is a little low but quite adequate, all else is up to spec. Icom IC-7000 in Excellent shape in the Original box (no foam). ALSO included is a 7 color monitor complete with cables. Face and cabinet are in Excellent shape shape, a Great radio that does it all: The technical properties and advantages of IF DSP found in our leading base station models now offers its superior advantages on mobile HF, 50MHz, 144MHz and 430/440MHz bands. As mentioned UHF is 20 watts output but transmits and receives fine. IF DSP First in its class. Digital IF filter, manual notch filter, digital twin PBT and more. The latest digital features are incorporated in this compact radio from two DSP chips that deliver superior processing performance. Of course, those features work on all ham bands, from HF to the 70cm band. AGC loop performance controlled by DSP. You will never experience AGC pumping from a signal filtered out by the DSP system. The digital IF filter and manual notch filter are inside the AGC loop, so you will not encounter AGC blocking. The AGC time constants are flexibly adjustable from slow, middle, fast (or AGC-off) for each operating mode. All the filters you want at your fingertips! Filters as the IC-7000 has adjustable digital filters. You just dial in the width you want and select whether you want a sharp or soft filter shape for SSB and CW modes. Then to pull-in the the weak ones, with a quick turn of the concentric twin PBT knobs, you can either narrow the IF passband, or shift the entire passband to eliminate the QRM. 2-point MNF (Manual notch filter). Pull out the weak signals in crowded band conditions with Icoms NEW two-point MNF (manual notch filter). Apply 70 dB of rejection to two signals at once! Notch width is adjustable wide, medium, and narrow and an auto-tuning notch filter is available, too. Noise reduction reduces background noise and improves signal-to-noise ratio. The noise reduction level is adjustable in 16 steps. It improves the readability of voice and data signals. The noise blanker reduces pulse-type noise such as engine ignition and sparking. The NB level and width (blanking duration) are adjustable in 100 steps. High power MOS-FET amps supply 35W (20 watt right now) output power on 430/440MHz band as well as 100W on HF/50MHz bands and 50W on 144MHz. It provides stable, high quality output with low IMD and low spurious emissions even during high duty cycle and extended operation. High stability crystal unit. The IC-7000 incorporates a high-stability master oscillator, providing 0.5ppm (0°C to +50°C). A must for data mode operation. DDS (Direct digital synthesizer) circuit. Icoms original DDS (Direct digital synthesizer) circuit improves the C/N ratio, providing a clear, clean transmit signal in all bands. Compact, all in one package. The IC-7000 sheds 20mm (25/32 in) of depth compared with the IC-706MKIIG. Its compact body is easy for carrying outdoors or mobile operation. Eight of the most-used radio functions such as NB, NR, MNF, and ANF are controlled by dedicated function keys grouped around the display for easy visibility. One quick touch turns the function on and off. A longer touch activates adjustment of the functions setting. Digital voice recorder (DVR). Record your callsign, CQ, or other information in 4 transmit playback memories with alphanumeric labels. A total of 90 seconds is available for the four memories. A front panel REC control allows you to record incoming signals for up to 25 minutes (99 channels). The DVR makes portable contesting or mini-expeditions a breeze! Up to 120 seconds per channel. The RTTY demodulator and decoder are built-in. External units and PC are no longer required for decoding. The twin peak audio filter reduces interfering signals overlapping the tones and the tuning indicator helps you zero-in with accurate tuning. Remote control microphone, HM-151. The HM-151 has a 10-keypad for quick channel selection. The triple band tacking register memorizes the last three frequencies and modes used on each band. Push the band button once to three times to recall the channel setting. The F-1 and F-2 buttons are programmable as shortcut menus of your often used functions. 2.5 inch color TFT display. The 2.5 inch color TFT display presents numbers and indicators in bright, concentrated colors for easy recognition. You can choose from 3 background colors and 2 font styles to suit your preference, in addition to a large operating frequency readout. And more, the Video output jack on the rear panel allows you to view a magnified display on an external monitor. 3.5(d) mm monaural cable is required for connection. SSB transmit bandwidth adjustable. The SSB transmit bandwidth is selectable from 100, 200, 300, 500Hz at the high-pass edge, and 2500, 2700, 2800, 2900Hz at the low-pass edge respectively. 3 types of high and low combinations can be set in the quick set mode. The band scope function lets you watch conditions around the band and visually assists in finding other stations. In center mode the band scope range is centered on the receiving frequency (±10kHz to ±250kHz). In Fixed mode the band scope sweeps a fixed range. Multi function meter and SWR graphic display. The IC-7000 displays power level, SWR, ALC and compression level of the speech compressor. The SWR graphic display is useful for tuning antennas. The measuring step is selectable from 10/50/100/500kHz steps and the number of measuring steps is adjustable from 3 to 13 steps. Front panel separation with optional 3.5m/5m separation cable (not included). RF speech compressor controlled by the DSP. Tone squelch in FM mode. Built-in voice synthesizer announces operating frequency, mode and signal strength. Duplex mode and automatic repeater function. Thermo control silent cooling fan. Noise squelch and S-meter squelch. The item “IC-7000 HF/VHF/UHF Transceiver Excellent shape in box with monitor! UHF 20 watts” is in sale since Friday, January 27, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hamguy123″ and is located in Hollywood, Florida. This item can be shipped to United States.

• Brand: Icom
• Model: ic-7000
• Frequency Band(s): HF
• Supported Modes: AM
• Product Type: Transceivers

]]> https://hamradiotransceiver.biz/2017/01/ic-7000-hfvhfuhf-transceiver-excellent-shape-in-box-with-monitor-uhf-20-watts/feed/ 0 https://hamradiotransceiver.biz/2016/10/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box-with-monitor/ https://hamradiotransceiver.biz/2016/10/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box-with-monitor/#comments Mon, 24 Oct 2016 11:37:47 +0000 http://hamradiotransceiver.biz/2016/10/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box-with-monitor/ read more]]>











Icom IC-7000 in Beautiful shape in the Original box (no foam). NIFTY manual, cloth cover, Original microphone (cord has a cut in the jacket but taped and 100% fine), Original power cord , and extra plugs/fuses. ALSO included is a Haier 7 color monitor complete with manual, remote, cables, and power supply! Face and cabinet are in Beautiful shape, a Great radio that does it all: The technical properties and advantages of IF DSP found in our leading base station models now offers its superior advantages on mobile HF, 50MHz, 144MHz and 430/440MHz bands. JUST checked and aligned by Bill Grassa N4ATS! IF DSP First in its class. Digital IF filter, manual notch filter, digital twin PBT and more. The latest digital features are incorporated in this compact radio from two DSP chips that deliver superior processing performance. Of course, those features work on all ham bands, from HF to the 70cm band. AGC loop performance controlled by DSP. You will never experience AGC pumping from a signal filtered out by the DSP system. The digital IF filter and manual notch filter are inside the AGC loop, so you will not encounter AGC blocking. The AGC time constants are flexibly adjustable from slow, middle, fast (or AGC-off) for each operating mode. All the filters you want at your fingertips! Filters as the IC-7000 has adjustable digital filters. You just dial in the width you want and select whether you want a sharp or soft filter shape for SSB and CW modes. Then to pull-in the the weak ones, with a quick turn of the concentric twin PBT knobs, you can either narrow the IF passband, or shift the entire passband to eliminate the QRM. 2-point MNF (Manual notch filter). Pull out the weak signals in crowded band conditions with Icoms NEW two-point MNF (manual notch filter). Apply 70 dB of rejection to two signals at once! Notch width is adjustable wide, medium, and narrow and an auto-tuning notch filter is available, too. Noise reduction reduces background noise and improves signal-to-noise ratio. The noise reduction level is adjustable in 16 steps. It improves the readability of voice and data signals. The noise blanker reduces pulse-type noise such as engine ignition and sparking. The NB level and width (blanking duration) are adjustable in 100 steps. High power MOS-FET amps supply 35W output power on 430/440MHz band as well as 100W on HF/50MHz bands and 50W on 144MHz. It provides stable, high quality output with low IMD and low spurious emissions even during high duty cycle and extended operation. High stability crystal unit. The IC-7000 incorporates a high-stability master oscillator, providing 0.5ppm (0°C to +50°C). A must for data mode operation. DDS (Direct digital synthesizer) circuit. Icoms original DDS (Direct digital synthesizer) circuit improves the C/N ratio, providing a clear, clean transmit signal in all bands. Compact, all in one package. The IC-7000 sheds 20mm (25/32 in) of depth compared with the IC-706MKIIG. Its compact body is easy for carrying outdoors or mobile operation. Eight of the most-used radio functions such as NB, NR, MNF, and ANF are controlled by dedicated function keys grouped around the display for easy visibility. One quick touch turns the function on and off. A longer touch activates adjustment of the functions setting. Digital voice recorder (DVR). Record your callsign, CQ, or other information in 4 transmit playback memories with alphanumeric labels. A total of 90 seconds is available for the four memories. A front panel REC control allows you to record incoming signals for up to 25 minutes (99 channels). The DVR makes portable contesting or mini-expeditions a breeze! Up to 120 seconds per channel. The RTTY demodulator and decoder are built-in. External units and PC are no longer required for decoding. The twin peak audio filter reduces interfering signals overlapping the tones and the tuning indicator helps you zero-in with accurate tuning. Remote control microphone, HM-151. The HM-151 has a 10-keypad for quick channel selection. The triple band tacking register memorizes the last three frequencies and modes used on each band. Push the band button once to three times to recall the channel setting. The F-1 and F-2 buttons are programmable as shortcut menus of your often used functions. 2.5 inch color TFT display. The 2.5 inch color TFT display presents numbers and indicators in bright, concentrated colors for easy recognition. You can choose from 3 background colors and 2 font styles to suit your preference, in addition to a large operating frequency readout. And more, the Video output jack on the rear panel allows you to view a magnified display on an external monitor. 3.5(d) mm monaural cable is required for connection. SSB transmit bandwidth adjustable. The SSB transmit bandwidth is selectable from 100, 200, 300, 500Hz at the high-pass edge, and 2500, 2700, 2800, 2900Hz at the low-pass edge respectively. 3 types of high and low combinations can be set in the quick set mode. The band scope function lets you watch conditions around the band and visually assists in finding other stations. In center mode the band scope range is centered on the receiving frequency (±10kHz to ±250kHz). In Fixed mode the band scope sweeps a fixed range. Multi function meter and SWR graphic display. The IC-7000 displays power level, SWR, ALC and compression level of the speech compressor. The SWR graphic display is useful for tuning antennas. The measuring step is selectable from 10/50/100/500kHz steps and the number of measuring steps is adjustable from 3 to 13 steps. Front panel separation with optional 3.5m/5m separation cable (not included). RF speech compressor controlled by the DSP. Tone squelch in FM mode. Built-in voice synthesizer announces operating frequency, mode and signal strength. Duplex mode and automatic repeater function. Thermo control silent cooling fan. Noise squelch and S-meter squelch. The item “IC-7000 HF/VHF/UHF Transceiver in Beautiful shape in the box with monitor” is in sale since Tuesday, October 18, 2016. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hamguy123″ and is located in Hollywood, Florida. This item can be shipped to United States.

• Brand: Icom
• Model: ic-7000
• Frequency Band(s): HF
• Supported Modes: AM
• Product Type: Transceivers

]]> https://hamradiotransceiver.biz/2016/10/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box-with-monitor/feed/ 0 https://hamradiotransceiver.biz/2016/07/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box-2/ https://hamradiotransceiver.biz/2016/07/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box-2/#comments Fri, 22 Jul 2016 14:45:45 +0000 http://hamradiotransceiver.biz/2016/07/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box-2/ read more]]>









Icom IC-7000 in Beautiful shape in the Original box. Original microphone, Original power cord , and accessory plug. Face and cabinet are in Beautiful shape, a Great radio that does it all: The technical properties and advantages of IF DSP found in our leading base station models now offers its superior advantages on mobile HF, 50MHz, 144MHz and 430/440MHz bands. IF DSP First in its class. Digital IF filter, manual notch filter, digital twin PBT and more. The latest digital features are incorporated in this compact radio from two DSP chips that deliver superior processing performance. Of course, those features work on all ham bands, from HF to the 70cm band. AGC loop performance controlled by DSP. You will never experience AGC pumping from a signal filtered out by the DSP system. The digital IF filter and manual notch filter are inside the AGC loop, so you will not encounter AGC blocking. The AGC time constants are flexibly adjustable from slow, middle, fast (or AGC-off) for each operating mode. All the filters you want at your fingertips! Filters as the IC-7000 has adjustable digital filters. You just dial in the width you want and select whether you want a sharp or soft filter shape for SSB and CW modes. Then to pull-in the the weak ones, with a quick turn of the concentric twin PBT knobs, you can either narrow the IF passband, or shift the entire passband to eliminate the QRM. 2-point MNF (Manual notch filter). Pull out the weak signals in crowded band conditions with Icoms NEW two-point MNF (manual notch filter). Apply 70 dB of rejection to two signals at once! Notch width is adjustable wide, medium, and narrow and an auto-tuning notch filter is available, too. Noise reduction reduces background noise and improves signal-to-noise ratio. The noise reduction level is adjustable in 16 steps. It improves the readability of voice and data signals. The noise blanker reduces pulse-type noise such as engine ignition and sparking. The NB level and width (blanking duration) are adjustable in 100 steps. High power MOS-FET amps supply 35W output power on 430/440MHz band as well as 100W on HF/50MHz bands and 50W on 144MHz. It provides stable, high quality output with low IMD and low spurious emissions even during high duty cycle and extended operation. High stability crystal unit. The IC-7000 incorporates a high-stability master oscillator, providing 0.5ppm (0°C to +50°C). A must for data mode operation. DDS (Direct digital synthesizer) circuit. Icoms original DDS (Direct digital synthesizer) circuit improves the C/N ratio, providing a clear, clean transmit signal in all bands. Compact, all in one package. The IC-7000 sheds 20mm (25/32 in) of depth compared with the IC-706MKIIG. Its compact body is easy for carrying outdoors or mobile operation. Eight of the most-used radio functions such as NB, NR, MNF, and ANF are controlled by dedicated function keys grouped around the display for easy visibility. One quick touch turns the function on and off. A longer touch activates adjustment of the functions setting. Digital voice recorder (DVR). Record your callsign, CQ, or other information in 4 transmit playback memories with alphanumeric labels. A total of 90 seconds is available for the four memories. A front panel REC control allows you to record incoming signals for up to 25 minutes (99 channels). The DVR makes portable contesting or mini-expeditions a breeze! Up to 120 seconds per channel. The RTTY demodulator and decoder are built-in. External units and PC are no longer required for decoding. The twin peak audio filter reduces interfering signals overlapping the tones and the tuning indicator helps you zero-in with accurate tuning. Remote control microphone, HM-151. The HM-151 has a 10-keypad for quick channel selection. The triple band tacking register memorizes the last three frequencies and modes used on each band. Push the band button once to three times to recall the channel setting. The F-1 and F-2 buttons are programmable as shortcut menus of your often used functions. 2.5 inch color TFT display. The 2.5 inch color TFT display presents numbers and indicators in bright, concentrated colors for easy recognition. You can choose from 3 background colors and 2 font styles to suit your preference, in addition to a large operating frequency readout. And more, the Video output jack on the rear panel allows you to view a magnified display on an external monitor. 3.5(d) mm monaural cable is required for connection. SSB transmit bandwidth adjustable. The SSB transmit bandwidth is selectable from 100, 200, 300, 500Hz at the high-pass edge, and 2500, 2700, 2800, 2900Hz at the low-pass edge respectively. 3 types of high and low combinations can be set in the quick set mode. The band scope function lets you watch conditions around the band and visually assists in finding other stations. In center mode the band scope range is centered on the receiving frequency (±10kHz to ±250kHz). In Fixed mode the band scope sweeps a fixed range. Multi function meter and SWR graphic display. The IC-7000 displays power level, SWR, ALC and compression level of the speech compressor. The SWR graphic display is useful for tuning antennas. The measuring step is selectable from 10/50/100/500kHz steps and the number of measuring steps is adjustable from 3 to 13 steps. Front panel separation with optional 3.5m/5m separation cable (not included). RF speech compressor controlled by the DSP. Tone squelch in FM mode. Built-in voice synthesizer announces operating frequency, mode and signal strength. Duplex mode and automatic repeater function. Thermo control silent cooling fan. Noise squelch and S-meter squelch. The item “IC-7000 HF/VHF/UHF Transceiver in Beautiful shape in the box” is in sale since Thursday, July 21, 2016. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hamguy123″ and is located in Hollywood, Florida. This item can be shipped to United States.

• Brand: Icom
• Model: ic-7000
• Frequency Band(s): HF
• Supported Modes: AM
• Product Type: Transceivers

]]> https://hamradiotransceiver.biz/2016/07/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box-2/feed/ 0 https://hamradiotransceiver.biz/2016/06/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box/ https://hamradiotransceiver.biz/2016/06/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box/#comments Wed, 08 Jun 2016 00:34:11 +0000 http://hamradiotransceiver.biz/2016/06/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box/ read more]]>









Icom IC-7000 in Beautiful shape in the Original box. Face and cabinet are in Beautiful shape, a Great radio that does it all: The technical properties and advantages of IF DSP found in our leading base station models now offers its superior advantages on mobile HF, 50MHz, 144MHz and 430/440MHz bands. IF DSP First in its class. Digital IF filter, manual notch filter, digital twin PBT and more. The latest digital features are incorporated in this compact radio from two DSP chips that deliver superior processing performance. Of course, those features work on all ham bands, from HF to the 70cm band. AGC loop performance controlled by DSP. You will never experience AGC pumping from a signal filtered out by the DSP system. The digital IF filter and manual notch filter are inside the AGC loop, so you will not encounter AGC blocking. The AGC time constants are flexibly adjustable from slow, middle, fast (or AGC-off) for each operating mode. All the filters you want at your fingertips! Filters as the IC-7000 has adjustable digital filters. You just dial in the width you want and select whether you want a sharp or soft filter shape for SSB and CW modes. Then to pull-in the the weak ones, with a quick turn of the concentric twin PBT knobs, you can either narrow the IF passband, or shift the entire passband to eliminate the QRM. 2-point MNF (Manual notch filter). Pull out the weak signals in crowded band conditions with Icoms NEW two-point MNF (manual notch filter). Apply 70 dB of rejection to two signals at once! Notch width is adjustable wide, medium, and narrow and an auto-tuning notch filter is available, too. Noise reduction reduces background noise and improves signal-to-noise ratio. The noise reduction level is adjustable in 16 steps. It improves the readability of voice and data signals. The noise blanker reduces pulse-type noise such as engine ignition and sparking. The NB level and width (blanking duration) are adjustable in 100 steps. High power MOS-FET amps supply 35W output power on 430/440MHz band as well as 100W on HF/50MHz bands and 50W on 144MHz. It provides stable, high quality output with low IMD and low spurious emissions even during high duty cycle and extended operation. High stability crystal unit. The IC-7000 incorporates a high-stability master oscillator, providing 0.5ppm (0°C to +50°C). A must for data mode operation. DDS (Direct digital synthesizer) circuit. Icoms original DDS (Direct digital synthesizer) circuit improves the C/N ratio, providing a clear, clean transmit signal in all bands. Compact, all in one package. The IC-7000 sheds 20mm (25/32 in) of depth compared with the IC-706MKIIG. Its compact body is easy for carrying outdoors or mobile operation. Eight of the most-used radio functions such as NB, NR, MNF, and ANF are controlled by dedicated function keys grouped around the display for easy visibility. One quick touch turns the function on and off. A longer touch activates adjustment of the functions setting. Digital voice recorder (DVR). Record your callsign, CQ, or other information in 4 transmit playback memories with alphanumeric labels. A total of 90 seconds is available for the four memories. A front panel REC control allows you to record incoming signals for up to 25 minutes (99 channels). The DVR makes portable contesting or mini-expeditions a breeze! Up to 120 seconds per channel. The RTTY demodulator and decoder are built-in. External units and PC are no longer required for decoding. The twin peak audio filter reduces interfering signals overlapping the tones and the tuning indicator helps you zero-in with accurate tuning. Remote control microphone, HM-151. The HM-151 has a 10-keypad for quick channel selection. The triple band tacking register memorizes the last three frequencies and modes used on each band. Push the band button once to three times to recall the channel setting. The F-1 and F-2 buttons are programmable as shortcut menus of your often used functions. 2.5 inch color TFT display. The 2.5 inch color TFT display presents numbers and indicators in bright, concentrated colors for easy recognition. You can choose from 3 background colors and 2 font styles to suit your preference, in addition to a large operating frequency readout. And more, the Video output jack on the rear panel allows you to view a magnified display on an external monitor. 3.5(d) mm monaural cable is required for connection. SSB transmit bandwidth adjustable. The SSB transmit bandwidth is selectable from 100, 200, 300, 500Hz at the high-pass edge, and 2500, 2700, 2800, 2900Hz at the low-pass edge respectively. 3 types of high and low combinations can be set in the quick set mode. The band scope function lets you watch conditions around the band and visually assists in finding other stations. In center mode the band scope range is centered on the receiving frequency (±10kHz to ±250kHz). In Fixed mode the band scope sweeps a fixed range. Multi function meter and SWR graphic display. The IC-7000 displays power level, SWR, ALC and compression level of the speech compressor. The SWR graphic display is useful for tuning antennas. The measuring step is selectable from 10/50/100/500kHz steps and the number of measuring steps is adjustable from 3 to 13 steps. Front panel separation with optional 3.5m/5m separation cable (not included). RF speech compressor controlled by the DSP. Tone squelch in FM mode. Built-in voice synthesizer announces operating frequency, mode and signal strength. Duplex mode and automatic repeater function. Thermo control silent cooling fan. Noise squelch and S-meter squelch. The item “IC-7000 HF/VHF/UHF Transceiver in Beautiful shape in the box” is in sale since Tuesday, June 07, 2016. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hamguy123″ and is located in Hollywood, Florida. This item can be shipped to United States.

• Brand: Icom
• Model: ic-7000
• Frequency Band(s): HF
• Supported Modes: AM
• Product Type: Transceivers

]]> https://hamradiotransceiver.biz/2016/06/ic-7000-hfvhfuhf-transceiver-in-beautiful-shape-in-the-box/feed/ 0 https://hamradiotransceiver.biz/2016/05/ic-7000-hfvhfuhf-transceiver-in-excellent-shape-in-the-box/ https://hamradiotransceiver.biz/2016/05/ic-7000-hfvhfuhf-transceiver-in-excellent-shape-in-the-box/#comments Tue, 17 May 2016 23:28:47 +0000 http://hamradiotransceiver.biz/2016/05/ic-7000-hfvhfuhf-transceiver-in-excellent-shape-in-the-box/ read more]]>









Icom IC-7000 in EXCELLENT shape in the Original box. Face and cabinet are in EXCELLENT shape, a Great radio that does it all: The technical properties and advantages of IF DSP found in our leading base station models now offers its superior advantages on mobile HF, 50MHz, 144MHz and 430/440MHz bands. IF DSP First in its class. Digital IF filter, manual notch filter, digital twin PBT and more. The latest digital features are incorporated in this compact radio from two DSP chips that deliver superior processing performance. Of course, those features work on all ham bands, from HF to the 70cm band. AGC loop performance controlled by DSP. You will never experience AGC pumping from a signal filtered out by the DSP system. The digital IF filter and manual notch filter are inside the AGC loop, so you will not encounter AGC blocking. The AGC time constants are flexibly adjustable from slow, middle, fast (or AGC-off) for each operating mode. All the filters you want at your fingertips! Filters as the IC-7000 has adjustable digital filters. You just dial in the width you want and select whether you want a sharp or soft filter shape for SSB and CW modes. Then to pull-in the the weak ones, with a quick turn of the concentric twin PBT knobs, you can either narrow the IF passband, or shift the entire passband to eliminate the QRM. 2-point MNF (Manual notch filter). Pull out the weak signals in crowded band conditions with Icoms NEW two-point MNF (manual notch filter). Apply 70 dB of rejection to two signals at once! Notch width is adjustable wide, medium, and narrow and an auto-tuning notch filter is available, too. Noise reduction reduces background noise and improves signal-to-noise ratio. The noise reduction level is adjustable in 16 steps. It improves the readability of voice and data signals. The noise blanker reduces pulse-type noise such as engine ignition and sparking. The NB level and width (blanking duration) are adjustable in 100 steps. High power MOS-FET amps supply 35W output power on 430/440MHz band as well as 100W on HF/50MHz bands and 50W on 144MHz. It provides stable, high quality output with low IMD and low spurious emissions even during high duty cycle and extended operation. High stability crystal unit. The IC-7000 incorporates a high-stability master oscillator, providing 0.5ppm (0°C to +50°C). A must for data mode operation. DDS (Direct digital synthesizer) circuit. Icoms original DDS (Direct digital synthesizer) circuit improves the C/N ratio, providing a clear, clean transmit signal in all bands. Compact, all in one package. The IC-7000 sheds 20mm (25/32 in) of depth compared with the IC-706MKIIG. Its compact body is easy for carrying outdoors or mobile operation. Eight of the most-used radio functions such as NB, NR, MNF, and ANF are controlled by dedicated function keys grouped around the display for easy visibility. One quick touch turns the function on and off. A longer touch activates adjustment of the functions setting. Digital voice recorder (DVR). Record your callsign, CQ, or other information in 4 transmit playback memories with alphanumeric labels. A total of 90 seconds is available for the four memories. A front panel REC control allows you to record incoming signals for up to 25 minutes (99 channels). The DVR makes portable contesting or mini-expeditions a breeze! Up to 120 seconds per channel. The RTTY demodulator and decoder are built-in. External units and PC are no longer required for decoding. The twin peak audio filter reduces interfering signals overlapping the tones and the tuning indicator helps you zero-in with accurate tuning. Remote control microphone, HM-151. The HM-151 has a 10-keypad for quick channel selection. The triple band tacking register memorizes the last three frequencies and modes used on each band. Push the band button once to three times to recall the channel setting. The F-1 and F-2 buttons are programmable as shortcut menus of your often used functions. 2.5 inch color TFT display. The 2.5 inch color TFT display presents numbers and indicators in bright, concentrated colors for easy recognition. You can choose from 3 background colors and 2 font styles to suit your preference, in addition to a large operating frequency readout. And more, the Video output jack on the rear panel allows you to view a magnified display on an external monitor. 3.5(d) mm monaural cable is required for connection. SSB transmit bandwidth adjustable. The SSB transmit bandwidth is selectable from 100, 200, 300, 500Hz at the high-pass edge, and 2500, 2700, 2800, 2900Hz at the low-pass edge respectively. 3 types of high and low combinations can be set in the quick set mode. The band scope function lets you watch conditions around the band and visually assists in finding other stations. In center mode the band scope range is centered on the receiving frequency (±10kHz to ±250kHz). In Fixed mode the band scope sweeps a fixed range. Multi function meter and SWR graphic display. The IC-7000 displays power level, SWR, ALC and compression level of the speech compressor. The SWR graphic display is useful for tuning antennas. The measuring step is selectable from 10/50/100/500kHz steps and the number of measuring steps is adjustable from 3 to 13 steps. Front panel separation with optional 3.5m/5m separation cable (not included). RF speech compressor controlled by the DSP. Tone squelch in FM mode. Built-in voice synthesizer announces operating frequency, mode and signal strength. Duplex mode and automatic repeater function. Thermo control silent cooling fan. Noise squelch and S-meter squelch. The item “IC-7000 HF/VHF/UHF Transceiver in Excellent shape in the box” is in sale since Tuesday, May 10, 2016. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hamguy123″ and is located in Hollywood, Florida. This item can be shipped to United States.

• Brand: Icom
• Model: ic-7000
• Frequency Band(s): HF
• Supported Modes: AM
• Product Type: Transceivers

]]> https://hamradiotransceiver.biz/2016/05/ic-7000-hfvhfuhf-transceiver-in-excellent-shape-in-the-box/feed/ 0 https://hamradiotransceiver.biz/2016/04/ic-7000-hfvhfuhf-transceiver-in-mint-condition-in-the-box/ https://hamradiotransceiver.biz/2016/04/ic-7000-hfvhfuhf-transceiver-in-mint-condition-in-the-box/#comments Fri, 29 Apr 2016 15:25:07 +0000 http://hamradiotransceiver.biz/2016/04/ic-7000-hfvhfuhf-transceiver-in-mint-condition-in-the-box/ read more]]>








Icom IC-7000 in MINT condition in the Original box. Face and cabinet are in Beautiful shape, a Great radio that does it all: The technical properties and advantages of IF DSP found in our leading base station models now offers its superior advantages on mobile HF, 50MHz, 144MHz and 430/440MHz bands. IF DSP First in its class. Digital IF filter, manual notch filter, digital twin PBT and more. The latest digital features are incorporated in this compact radio from two DSP chips that deliver superior processing performance. Of course, those features work on all ham bands, from HF to the 70cm band. AGC loop performance controlled by DSP. You will never experience AGC pumping from a signal filtered out by the DSP system. The digital IF filter and manual notch filter are inside the AGC loop, so you will not encounter AGC blocking. The AGC time constants are flexibly adjustable from slow, middle, fast (or AGC-off) for each operating mode. All the filters you want at your fingertips! Filters as the IC-7000 has adjustable digital filters. You just dial in the width you want and select whether you want a sharp or soft filter shape for SSB and CW modes. Then to pull-in the the weak ones, with a quick turn of the concentric twin PBT knobs, you can either narrow the IF passband, or shift the entire passband to eliminate the QRM. 2-point MNF (Manual notch filter). Pull out the weak signals in crowded band conditions with Icoms NEW two-point MNF (manual notch filter). Apply 70 dB of rejection to two signals at once! Notch width is adjustable wide, medium, and narrow and an auto-tuning notch filter is available, too. Noise reduction reduces background noise and improves signal-to-noise ratio. The noise reduction level is adjustable in 16 steps. It improves the readability of voice and data signals. The noise blanker reduces pulse-type noise such as engine ignition and sparking. The NB level and width (blanking duration) are adjustable in 100 steps. High power MOS-FET amps supply 35W output power on 430/440MHz band as well as 100W on HF/50MHz bands and 50W on 144MHz. It provides stable, high quality output with low IMD and low spurious emissions even during high duty cycle and extended operation. High stability crystal unit. The IC-7000 incorporates a high-stability master oscillator, providing 0.5ppm (0°C to +50°C). A must for data mode operation. DDS (Direct digital synthesizer) circuit. Icoms original DDS (Direct digital synthesizer) circuit improves the C/N ratio, providing a clear, clean transmit signal in all bands. Compact, all in one package. The IC-7000 sheds 20mm (25/32 in) of depth compared with the IC-706MKIIG. Its compact body is easy for carrying outdoors or mobile operation. Eight of the most-used radio functions such as NB, NR, MNF, and ANF are controlled by dedicated function keys grouped around the display for easy visibility. One quick touch turns the function on and off. A longer touch activates adjustment of the functions setting. Digital voice recorder (DVR). Record your callsign, CQ, or other information in 4 transmit playback memories with alphanumeric labels. A total of 90 seconds is available for the four memories. A front panel REC control allows you to record incoming signals for up to 25 minutes (99 channels). The DVR makes portable contesting or mini-expeditions a breeze! Up to 120 seconds per channel. The RTTY demodulator and decoder are built-in. External units and PC are no longer required for decoding. The twin peak audio filter reduces interfering signals overlapping the tones and the tuning indicator helps you zero-in with accurate tuning. Remote control microphone, HM-151. The HM-151 has a 10-keypad for quick channel selection. The triple band tacking register memorizes the last three frequencies and modes used on each band. Push the band button once to three times to recall the channel setting. The F-1 and F-2 buttons are programmable as shortcut menus of your often used functions. 2.5 inch color TFT display. The 2.5 inch color TFT display presents numbers and indicators in bright, concentrated colors for easy recognition. You can choose from 3 background colors and 2 font styles to suit your preference, in addition to a large operating frequency readout. And more, the Video output jack on the rear panel allows you to view a magnified display on an external monitor. 3.5(d) mm monaural cable is required for connection. SSB transmit bandwidth adjustable. The SSB transmit bandwidth is selectable from 100, 200, 300, 500Hz at the high-pass edge, and 2500, 2700, 2800, 2900Hz at the low-pass edge respectively. 3 types of high and low combinations can be set in the quick set mode. The band scope function lets you watch conditions around the band and visually assists in finding other stations. In center mode the band scope range is centered on the receiving frequency (±10kHz to ±250kHz). In Fixed mode the band scope sweeps a fixed range. Multi function meter and SWR graphic display. The IC-7000 displays power level, SWR, ALC and compression level of the speech compressor. The SWR graphic display is useful for tuning antennas. The measuring step is selectable from 10/50/100/500kHz steps and the number of measuring steps is adjustable from 3 to 13 steps. Front panel separation with optional 3.5m/5m separation cable (not included). RF speech compressor controlled by the DSP. Tone squelch in FM mode. Built-in voice synthesizer announces operating frequency, mode and signal strength. Duplex mode and automatic repeater function. Thermo control silent cooling fan. Noise squelch and S-meter squelch. The item “IC-7000 HF/VHF/UHF Transceiver in MINT condition in the box” is in sale since Thursday, April 28, 2016. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hamguy123″ and is located in Hollywood, Florida. This item can be shipped to United States.

• Brand: Icom
• Model: ic-7000
• Frequency Band(s): HF
• Supported Modes: AM
• Product Type: Transceivers

]]> https://hamradiotransceiver.biz/2016/04/ic-7000-hfvhfuhf-transceiver-in-mint-condition-in-the-box/feed/ 0