https://hamradiotransceiver.biz Sun, 31 May 2026 04:23:57 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2021/08/tigertronics-slusb4r-signalink-usb-for-4-pin-round-mic/ https://hamradiotransceiver.biz/2021/08/tigertronics-slusb4r-signalink-usb-for-4-pin-round-mic/#comments Fri, 06 Aug 2021 09:38:34 +0000 http://hamradiotransceiver.biz/2021/08/tigertronics-slusb4r-signalink-usb-for-4-pin-round-mic/ read more]]>


Tigertronics SLUSB4R SIGNALINK USB FOR 4-PIN ROUND MIC. SignaLink USB For 4-Pin Round Mic Connector. FCC Certified – Unlike many competitors, the SignaLink USB has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Built-in Low Noise Sound Card – This provides optimum performance and frees your computer’s existing sound card for other uses. It also greatly simplifies installation and operation, by reducing the number of cable connections, and by providing consistent performance that is independent of the computer’s sound card. Simple Installation – The SignaLink USB has only one USB connection to the computer, and in most cases, only one connection to the radio. There are no audio cables to get mixed-up! Easy Setup and Operation – The SignaLink USB’s built-in sound card provides consistent audio levels and performance that is completely independent of the computer’s sound card. This lets us streamline our Audio Level Setting procedure like never before. Simply set the software “Transmit” audio controls as described in the SignaLink manual, and then adjust the SignaLink’s front panel “TX” control for the desired RF power level. Setting of the RX Level is even easier, as this is done completely by the SignaLink front panel “RX” control. There are no software “Recording” controls to adjust! Convenient Front Panel Controls – You can now easily adjust your TX Audio, RX Audio and Transmit Delay without having to open the SignaLink case. This lets you optimize your Transmit Audio (RF Power), Receive Audio level (“waterfall drive”), and Transmit “Hang Time” delay “on the fly”! Works with ALL Radio Mic, Data, and Accessory Ports – The SignaLink USB works with ALL radios, and can be attached to your radios Mic, Data, or Accessory port. This allows most users to attach the SignaLink to the back of the radio (Data or Accessory Port) and leave the microphone plugged in! Supports All Sound Card Digital & Voice Modes – The SignaLink USB supports ALL Digital and Voice modes that are available for sound card interfaces. This includes ALL traditional modes such as CW, RTTY, AMTOR, and SSTV (to name a few), and ALL new modes such as PSK-31, MT-63, and EchoLink. All standard sound card communications programs will work with the SignaLink USB. Complete Isolation – Unlike some interfaces on the market, ALL SignaLink models COMPLETELY isolate your computer from your radio. This eliminates troublesome ground loops and prevents hum and noise from degrading the signals. The SignaLink USB provides isolation through the use of audio transformers and a relay-based PTT keying circuit. Transmit Audio / “Side Tone” Output – A rear panel “Monitor” jack can be used with headphones or powered (amplified) speakers to monitor your Transmit Audio, or Side Tone during CW operation. External Speaker Support – If your installation requires that you attach the SignaLink to your radio’s External Speaker jack, then you can plug an external speaker or headphones into the SignaLink’s rear panel “Aux” jack and continue to hear your RX Audio. No External Power Required – The SignaLink USB is always powered by the computer’s USB port, so external power is NEVER required. SignaLink USB main unit. Internal Jumper wire pin-out instructions. USB Cable (to the computer). 4-pin Round microphone cable (to the radio). GigaParts ships from multiple locations across the USA, so a portion of your order may come from two different warehouses. Modified radios do not qualify for direct replacement unless GigaParts performed the modification. Is a full service computer and amateur radio store. Our PC department stocks the latest components for upgrading your PC, building your own PC, or having us build one for you. Our Radio department features the latest products from manufacturers such as Alinco, Icom, Kenwood®, Yaesu, MFJ, Diamond, and many more. Whether you’re a DX’er looking for the latest HF rig or a soon-to-be-HAM looking for study materials and a two-meter handie talkie, we have what you need! We look forward to adding you to our long list of satisfied customers. You may also be interested in.. View more great items. The item “Tigertronics SLUSB4R SIGNALINK USB FOR 4-PIN ROUND MIC” is in sale since Monday, October 19, 2015. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment”. The seller is “gigaparts” and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• MPN: SLUSB4R
• To Fit: Ham Radio Transceiver
• Compatible Brand: For Yaesu
• Brand: Tigertronics
• Type: USB Radio Interface

]]> https://hamradiotransceiver.biz/2021/08/tigertronics-slusb4r-signalink-usb-for-4-pin-round-mic/feed/ 0 https://hamradiotransceiver.biz/2021/07/tigertronics-slusb6pm-signalink-usb-for-6-pin-mini-din-data-port/ https://hamradiotransceiver.biz/2021/07/tigertronics-slusb6pm-signalink-usb-for-6-pin-mini-din-data-port/#comments Sat, 10 Jul 2021 15:39:30 +0000 http://hamradiotransceiver.biz/2021/07/tigertronics-slusb6pm-signalink-usb-for-6-pin-mini-din-data-port/ read more]]>





SignaLink USB SLUSB6PM For 6-pin Mini DIN Data Port. The SignaLink USB comes with all of the cabling needed to use it with your computer and radio (see below for a list of compatible radio models), as well as sample software to get you started. This listing includes the following items. Detachable 6-pin mini-DIN Radio cable p/n SLCAB6PM (3ft length). Detachable USB Cable (6ft length). Jumper Wires set of 6, cut and stripped, and ready to use – NO soldering required! If you do not want to install jumper wires, then be sure to see our Plug & Play Jumper Modules. They greatly simplify installation! Free Software CD (Windows). The SignaLink USB supports virtually all sound card digital and voice modes including FT8, PSK31, JT65, WINMOR, Winlink Express, VARA FM 1200, RTTY, SSTV, CW and EchoLink, to name a few. The SignaLink USB p/n SLUSB6PM is compatible with virtually all Icom, Kenwood and Yaesu radios that have a 6-pin mini-DIN “Data”, “Packet” or “Packet / RTTY” jack. This includes but is not limited to the radios listed below. We have a number of different SignaLink part numbers available to fit most standard radios. TM-271 (EU model only). FCC Certified – Unlike virtually all of our competitors, the SignaLink USB has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Built-in Low Noise Sound Card – This provides optimum performance and frees your computer’s existing sound card for other uses. It also greatly simplifies installation and operation, by reducing the number of cable connections, and by providing consistent performance that is independent of the computer’s sound card. Simple Installation – The SignaLink USB has only one USB connection to the computer, and in most cases, only one connection to the radio. There are no computer audio cables to get mixed-up! Easy Setup and Operation – The SignaLink USB’s built-in sound card provides consistent audio levels and performance that is completely independent of the computer’s sound card. This lets us streamline our Audio Level Setting procedure like never before. Simply set the software “Transmit” audio controls as described in the SignaLink manual, and then adjust the SignaLink’s front panel “TX” control for the desired RF power level. Setting of the RX Level is even easier, as this is done completely by the SignaLink front panel “RX” control. There are no software “Recording” controls to adjust! Convenient Front Panel Controls – You can now easily adjust your TX Audio, RX Audio and Transmit Delay without having to open the SignaLink case. This lets you optimize your Transmit Audio (RF Power), Receive Audio level (“waterfall drive”), and Transmit “Hang Time” delay “on the fly”! Works with virtually ALL Radio Mic, Data, and Accessory Ports – The SignaLink USB works with virtually ALL radios, and can be attached to your radios Mic, Data, or Accessory port. This allows most users to attach the SignaLink to the back of the radio (Data or Accessory Port) and leave the microphone plugged in! Supports virtually All Sound Card Digital & Voice Modes – The SignaLink USB supports virtually ALL Digital and Voice modes that are available for sound card interfaces. This includes traditional modes such as CW, RTTY, AMTOR, and SSTV (to name a few), and virtually ALL new modes such as FT-8, JT65, PSK-31, MT-63, WINMOR, VARA FM 1200, and EchoLink. Virtually ALL standard sound card communications programs will work with the SignaLink USB. Complete Isolation – Unlike some interfaces on the market, ALL SignaLink models COMPLETELY isolate your computer from your radio. This eliminates troublesome ground loops and prevents hum and noise from degrading the signals. The SignaLink USB provides isolation through the use of audio transformers and a relay-based PTT keying circuit. Transmit Audio / “Side Tone” Output – A rear panel “Monitor” jack can be used with headphones or powered (amplified) speakers to monitor your Transmit Audio, or Side Tone during CW operation. External Speaker Support – If your installation requires that you attach the SignaLink to your radio’s External Speaker jack, then you can plug an external speaker or headphones into the SignaLink’s rear panel “Aux” jack and continue to hear your RX Audio. No External Power Required. The SignaLink USB is always powered by the computer’s USB port, so external power is NEVER required. Every SignaLink USB is supplied with the following items. Fully Assembled Detachable Radio Cable – The SignaLink part number determines which radio cable is supplied with the unit (please specify when ordering). Cables are available for virtually all radios that have a Data or Accessory Port that uses a 5-pin DIN, 8-pin DIN, 13-pin DIN, or 6-pin mini-DIN connector, and a special cable is also available for the Elecraft K3/KX2/KX3. Cables are also available for virtually all radios that use a 4-pin round, 8-pin round, RJ-11, and RJ-45 mic connector. HT cables are available for most Yaesu, Kenwood, Baofeng, Wouxun and similar HTs, and a An un-terminated cable is available for radios that uses a different type of connector (build your own cable). All Data Port, Accessory Port, un-terminated, and HT radio cables are approximately three feet in length. Mic cables are approximately eighteen inches in length. USB Cable – This cable connects the SignaLink USB to your computer. It is approximately six feet in length. Mono Cable – This cable is used with radios that do not have Receive Audio on the Mic jack. It is approximately two feet in length. If you connect the SignaLink USB to your radio’s Data or Accessory Port, then you will not use this cable. Jumper Wires – These are used to configure the SignaLink for your specific radio. No soldering is required – The jumpers simply push into a socket on the circuit board! The SignaLink software CD contains jumper settings for the most popular radios. If you do not want to install jumper wires, then be sure to see our Plug & Play Jumper Modules. Allen Wrench – 3/32 size. Used to open the SignaLink USB case. Rubber Feet – These are included with every SignaLink USB and can be installed by the user if desired. Software CD – This free CD contains several of the most popular PC programs for the most popular modes including PSK-31, FT-8, JT65, SSTV, MT-63, CW, RTTY and Packet. Software for other modes, as well as MAC software, can be downloaded from our SignaLink Software Page. The entire Tigertronics web site with all of the latest support information (including jumper settings) is also included on the CD. Note that the CD is NOT required for installation of the SignaLink, as the drivers are always provided directly by the Operating System. Printed Installation Manual – The SignaLink manual contains both step-by-step, and “quick” installation instructions for users of all experience levels. Troubleshooting Tips and an Audio Level Adjustment procedure are also included. I don’t sell used or refurbished equipment. The item “Tigertronics SLUSB6PM Signalink USB For 6-pin Mini DIN Data Port” is in sale since Friday, November 20, 2020. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment”. The seller is “thehamshop” and is located in Summitville, Tennessee. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• To Fit: Ham Radio Receiver
• Country/Region of Manufacture: United States
• Compatible Brand: For Icom
• Band: AM
• Connectivity: USB
• Type: USB Radio Interface
• Year Manufactured: 2021
• MPN: SLUSB6PM
• Brand: Tigertronics
• Manufacturer Warranty: 3 months
• Voltage: USB Power

]]> https://hamradiotransceiver.biz/2021/07/tigertronics-slusb6pm-signalink-usb-for-6-pin-mini-din-data-port/feed/ 0 https://hamradiotransceiver.biz/2020/09/tigertronics-slusb13k-signalink-usb-for-kenwood-13-pin-din/ https://hamradiotransceiver.biz/2020/09/tigertronics-slusb13k-signalink-usb-for-kenwood-13-pin-din/#comments Mon, 14 Sep 2020 12:05:13 +0000 http://hamradiotransceiver.biz/2020/09/tigertronics-slusb13k-signalink-usb-for-kenwood-13-pin-din/ read more]]>


Tigertronics SLUSB13K SIGNALINK USB FOR KENWOOD 13-PIN DIN. SignaLink USB for Kenwood 13-Pin DIM Accessory Port Connector Features. FCC Certified – Unlike many competitors, the SignaLink USB has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Built-in Low Noise Sound Card – This provides optimum performance and frees your computer’s existing sound card for other uses. It also greatly simplifies installation and operation, by reducing the number of cable connections, and by providing consistent performance that is independent of the computer’s sound card. Simple Installation – The SignaLink USB has only one USB connection to the computer, and in most cases, only one connection to the radio. There are no audio cables to get mixed-up! Easy Setup and Operation – The SignaLink USB’s built-in sound card provides consistent audio levels and performance that is completely independent of the computer’s sound card. This lets us streamline our Audio Level Setting procedure like never before. Simply set the software “Transmit” audio controls as described in the SignaLink manual, and then adjust the SignaLink’s front panel “TX” control for the desired RF power level. Setting of the RX Level is even easier, as this is done completely by the SignaLink front panel “RX” control. There are no software “Recording” controls to adjust! Convenient Front Panel Controls – You can now easily adjust your TX Audio, RX Audio and Transmit Delay without having to open the SignaLink case. This lets you optimize your Transmit Audio (RF Power), Receive Audio level (“waterfall drive”), and Transmit “Hang Time” delay “on the fly”! Works with ALL Radio Mic, Data, and Accessory Ports – The SignaLink USB works with ALL radios, and can be attached to your radios Mic, Data, or Accessory port. This allows most users to attach the SignaLink to the back of the radio (Data or Accessory Port) and leave the microphone plugged in! Supports All Sound Card Digital & Voice Modes – The SignaLink USB supports ALL Digital and Voice modes that are available for sound card interfaces. This includes ALL traditional modes such as CW, RTTY, AMTOR, and SSTV (to name a few), and ALL new modes such as PSK-31, MT-63, and EchoLink. All standard sound card communications programs will work with the SignaLink USB. Complete Isolation – Unlike some interfaces on the market, ALL SignaLink models COMPLETELY isolate your computer from your radio. This eliminates troublesome ground loops and prevents hum and noise from degrading the signals. The SignaLink USB provides isolation through the use of audio transformers and a relay-based PTT keying circuit. Transmit Audio / “Side Tone” Output – A rear panel “Monitor” jack can be used with headphones or powered (amplified) speakers to monitor your Transmit Audio, or Side Tone during CW operation. External Speaker Support – If your installation requires that you attach the SignaLink to your radio’s External Speaker jack, then you can plug an external speaker or headphones into the SignaLink’s rear panel “Aux” jack and continue to hear your RX Audio. No External Power Required – The SignaLink USB is always powered by the computer’s USB port, so external power is NEVER required. SignaLink USB main unit. Internal Jumper wire pin-out instructions. USB Cable (to the computer). 13-pin DIN cable (to the radio). GigaParts ships from multiple locations across the USA, so a portion of your order may come from two different warehouses. Modified radios do not qualify for direct replacement unless GigaParts performed the modification. Is a full service computer and amateur radio store. Our PC department stocks the latest components for upgrading your PC, building your own PC, or having us build one for you. Our Radio department features the latest products from manufacturers such as Alinco, Icom, Kenwood®, Yaesu, MFJ, Diamond, and many more. Whether you’re a DX’er looking for the latest HF rig or a soon-to-be-HAM looking for study materials and a two-meter handie talkie, we have what you need! We look forward to adding you to our long list of satisfied customers. You may also be interested in.. View more great items. The item “Tigertronics SLUSB13K SIGNALINK USB FOR KENWOOD 13-PIN DIN” is in sale since Monday, October 19, 2015. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment”. The seller is “gigaparts” and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• MPN: SLUSB13K
• To Fit: Ham Radio Transceiver
• Compatible Brand: For Kenwood
• Connectivity: USB
• Brand: Tigertronics
• Type: USB Radio Interface

]]> https://hamradiotransceiver.biz/2020/09/tigertronics-slusb13k-signalink-usb-for-kenwood-13-pin-din/feed/ 0 https://hamradiotransceiver.biz/2020/08/tigertronics-slusb13i-signalink-usb-for-icom-13-pin-din/ https://hamradiotransceiver.biz/2020/08/tigertronics-slusb13i-signalink-usb-for-icom-13-pin-din/#comments Thu, 20 Aug 2020 03:45:47 +0000 http://hamradiotransceiver.biz/2020/08/tigertronics-slusb13i-signalink-usb-for-icom-13-pin-din/ read more]]>


Tigertronics SLUSB13I SIGNALINK USB FOR ICOM 13-PIN DIN. SignaLink USB for ICOM 13-Pin DIN Accessory Port Connector Features. FCC Certified – Unlike many competitors, the SignaLink USB has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Built-in Low Noise Sound Card – This provides optimum performance and frees your computer’s existing sound card for other uses. It also greatly simplifies installation and operation, by reducing the number of cable connections, and by providing consistent performance that is independent of the computer’s sound card. Simple Installation – The SignaLink USB has only one USB connection to the computer, and in most cases, only one connection to the radio. There are no audio cables to get mixed-up! Easy Setup and Operation – The SignaLink USB’s built-in sound card provides consistent audio levels and performance that is completely independent of the computer’s sound card. This lets us streamline our Audio Level Setting procedure like never before. Simply set the software “Transmit” audio controls as described in the SignaLink manual, and then adjust the SignaLink’s front panel “TX” control for the desired RF power level. Setting of the RX Level is even easier, as this is done completely by the SignaLink front panel “RX” control. There are no software “Recording” controls to adjust! Convenient Front Panel Controls – You can now easily adjust your TX Audio, RX Audio and Transmit Delay without having to open the SignaLink case. This lets you optimize your Transmit Audio (RF Power), Receive Audio level (“waterfall drive”), and Transmit “Hang Time” delay “on the fly”! Works with ALL Radio Mic, Data, and Accessory Ports – The SignaLink USB works with ALL radios, and can be attached to your radios Mic, Data, or Accessory port. This allows most users to attach the SignaLink to the back of the radio (Data or Accessory Port) and leave the microphone plugged in! Supports All Sound Card Digital & Voice Modes – The SignaLink USB supports ALL Digital and Voice modes that are available for sound card interfaces. This includes ALL traditional modes such as CW, RTTY, AMTOR, and SSTV (to name a few), and ALL new modes such as PSK-31, MT-63, and EchoLink. All standard sound card communications programs will work with the SignaLink USB. Complete Isolation – Unlike some interfaces on the market, ALL SignaLink models COMPLETELY isolate your computer from your radio. This eliminates troublesome ground loops and prevents hum and noise from degrading the signals. The SignaLink USB provides isolation through the use of audio transformers and a relay-based PTT keying circuit. Transmit Audio / “Side Tone” Output – A rear panel “Monitor” jack can be used with headphones or powered (amplified) speakers to monitor your Transmit Audio, or Side Tone during CW operation. External Speaker Support – If your installation requires that you attach the SignaLink to your radio’s External Speaker jack, then you can plug an external speaker or headphones into the SignaLink’s rear panel “Aux” jack and continue to hear your RX Audio. No External Power Required – The SignaLink USB is always powered by the computer’s USB port, so external power is NEVER required. Signalink USB Main Unit. Full Assembled Detachable Radio Cable – SLUSB13I. Compatible with any Icom radio with a 13-pin DIN port, including. This radio does NOT mute the Mic jack when using the 13-pin Accy Port, so we recommend using the 6-pin Mini Din Data Port instead. GigaParts ships from multiple locations across the USA, so a portion of your order may come from two different warehouses. Modified radios do not qualify for direct replacement unless GigaParts performed the modification. Is a full service computer and amateur radio store. Our PC department stocks the latest components for upgrading your PC, building your own PC, or having us build one for you. Our Radio department features the latest products from manufacturers such as Alinco, Icom, Kenwood®, Yaesu, MFJ, Diamond, and many more. Whether you’re a DX’er looking for the latest HF rig or a soon-to-be-HAM looking for study materials and a two-meter handie talkie, we have what you need! We look forward to adding you to our long list of satisfied customers. You may also be interested in.. View more great items. The item “Tigertronics SLUSB13I SIGNALINK USB FOR ICOM 13-PIN DIN” is in sale since Monday, October 19, 2015. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment”. The seller is “gigaparts” and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Brand: Tigertronics
• MPN: SLUSB13I

]]> https://hamradiotransceiver.biz/2020/08/tigertronics-slusb13i-signalink-usb-for-icom-13-pin-din/feed/ 0 https://hamradiotransceiver.biz/2020/08/tigertronics-slusb6pm-signalink-usb-sound-card-for-6-pin-mini-din-data-ports/ https://hamradiotransceiver.biz/2020/08/tigertronics-slusb6pm-signalink-usb-sound-card-for-6-pin-mini-din-data-ports/#comments Mon, 17 Aug 2020 21:27:40 +0000 http://hamradiotransceiver.biz/2020/08/tigertronics-slusb6pm-signalink-usb-sound-card-for-6-pin-mini-din-data-ports/ read more]]>





Tigertronics SLUSB6PM SignaLink USB Sound Card for 6-pin Mini DIN Data Ports. The SignaLink USB p/n SLUSB6PM and SLMOD6PM are compatible with virtually all ICOM, Kenwood, and Yaesu radios that have a 6-pin mini-DIN Data Port. This includes but is not limited to the radios listed below. Be sure to see Tigertonics’ radio wiring and jumper settings page for any special notes on your radio menu settings, etc. European TM-271/271A models only. Data Port supports VHF & UHF Packet only. The FTM-350 requires Yaesu’s CT-141 adapter to convert from it’s 8-pin mini-DIN connector to a standard 6-pin mini-DIN. This adapter should be available from any authorized Yaesu dealer. ##The FTM-100DR and FTM-400DR requires Yaesu’s CT-164 adapter to convert from a 10-pin mini-DIN connector to a standard 6-pin mini-DIN. GigaParts ships from multiple locations across the USA, so a portion of your order may come from two different warehouses. Modified radios do not qualify for direct replacement unless GigaParts performed the modification. Is a full service computer and amateur radio store. Our PC department stocks the latest components for upgrading your PC, building your own PC, or having us build one for you. Our Radio department features the latest products from manufacturers such as Alinco, Icom, Kenwood®, Yaesu, MFJ, Diamond, and many more. Whether you’re a DX’er looking for the latest HF rig or a soon-to-be-HAM looking for study materials and a two-meter handie talkie, we have what you need! We look forward to adding you to our long list of satisfied customers. You may also be interested in.. View more great items. The item “Tigertronics SLUSB6PM SignaLink USB Sound Card for 6-pin Mini DIN Data Ports” is in sale since Monday, October 19, 2015. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment”. The seller is “gigaparts” and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• MPN: SLUSB6PM
• Brand: Tigertronics

]]> https://hamradiotransceiver.biz/2020/08/tigertronics-slusb6pm-signalink-usb-sound-card-for-6-pin-mini-din-data-ports/feed/ 0