https://hamradiotransceiver.biz Wed, 12 Aug 2026 20:39:44 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2024/12/radio-transceiver-1mhz-6ghz-sdr-full-featured-ham-radio-transceiver-with-5-antenna/ https://hamradiotransceiver.biz/2024/12/radio-transceiver-1mhz-6ghz-sdr-full-featured-ham-radio-transceiver-with-5-antenna/#comments Sun, 01 Dec 2024 20:07:05 +0000 https://hamradiotransceiver.biz/2024/12/radio-transceiver-1mhz-6ghz-sdr-full-featured-ham-radio-transceiver-with-5-antenna/ read more]]>























3.5mm Sound Jack: This radio transceiver utilizes a 3.5mm sound jack, so with the microphone plugged in, you can simply press and hold the right side button to place a call. Catch And : This radio transceiver makes it very easy to catch and wireless from ISM band remotes. Hardware Complete: This radio transceiver features a 3.2 inch resistive touchscreen, navigation switches, radio outputs, microphone inputs, DC 2.1 interface, and 4 layer gold plating. All you need to do is go to the catching menu, set the frequency of the remote control key, press the red R record button and press the key on the remote control. Then stop recording to save it to the storage card. The exact same will be transmitted over the air, effectively replacing your remote key. TX Microphone: Using the 3.5mm radio jack, the radio transceiver can also be used as a standard push to talk or voice activated walkie talkie radio by the radio transceiver. Plug the microphone into the radio jack, you simply press and hold the right button to push to talk. If desired, you can also enable multiple CTCSS options, as well as tones that appear to be transmitted to the wireless headset Receiver: You can easily listen to standard NFM and WFM radio by connecting your speaker to the Portapack’s 3.5mm radio jack. ADS B reception is easily enabled on the radio transceiver by selecting the inductor and symbol in the upper right corner. Hardware Configuration: 3.2 Inch, 240 x 320 RGB LCD With Resistive Touchscreen. Navigation Switches Radio Output Microphone Input DC 2.1 Connector 4 layer Gold Plating HAVOC Features Include: IQ File Playback Microphone FM Transmission With CTCSS CTCSS Decoder Frequency Manager (Save And Load From Storage Card With Categories And Comments) File Manager Soundboard File Player (Holds 8 Bit Mono Files) Storage Card, Wav Directory ADS B Receiver With Map View SSTV Transmitter Fully Configurable Transmitter POCSAG Transmitter POCSAG Receiver, Decoder Morse Transmitter (FM and CW) OOK Transmitters for Common Remote Encoders (PT2262, Doorbells, Remote Outlets, Some Garages) RDS (Radio Data System) PSN, RadioText and Time Group Transmitters Weather Radio Sounder Receivers for M10 and M2K2 AFSK Receiver AFSK Transmitter (Bell202) Nuoptix DTMF Synchronization Transmitter TouchTunes Jukebox Universal Remote Control LCR (Language de Commande Routier) Message Generator Street Lighting Control Transmitter (CCIR tones) Play Dead for Emergencies Fully Configurable RF Generator RSSI Radio Output for Pitch (for Direction Finding) Features: 4 Way Buttons, Scroll Wheel and Selector Buttons. Cell Battery for Saving Settings and Date, Time. Broadband (18MHz) Spectrum and Cascade Analysis. For mode runs for firmware for use with SDR host software. Calibrates PPM for more accurate adjustments. Sleep mode saves energy by turning off the display only. Instructions: When you place the PortaPack in for Mode, your will continue to work with the PC based SDR software. The radio transceiver is only compatible with for One. If your for Blue does not have a baseband connector installed, you should have no mechanical problems. 1 x Full Featured Radio Transceiver. 2 x Antenna Accessory. 1 x USB Cable. 1 x English Manual. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://hamradiotransceiver.biz/2024/12/radio-transceiver-1mhz-6ghz-sdr-full-featured-ham-radio-transceiver-with-5-antenna/feed/ 0 https://hamradiotransceiver.biz/2024/10/radio-transceiver-1mhz-6ghz-sdr-featured-ham-radio-transceiver-with-5-antennaes-2/ https://hamradiotransceiver.biz/2024/10/radio-transceiver-1mhz-6ghz-sdr-featured-ham-radio-transceiver-with-5-antennaes-2/#comments Thu, 31 Oct 2024 04:57:12 +0000 https://hamradiotransceiver.biz/2024/10/radio-transceiver-1mhz-6ghz-sdr-featured-ham-radio-transceiver-with-5-antennaes-2/ read more]]>























3.5mm Sound Jack: This radio transceiver utilizes a 3.5mm sound jack, so with the microphone plugged in, you can simply press and hold the right side button to place a call. Catch And : This radio transceiver makes it very easy to catch and wireless signals from ISM band remotes. Hardware Complete: This radio transceiver features a 3.2 inch resistive touchscreen, navigation switches, radio outputs, microphone inputs, DC 2.1 interface, and 4 layer gold plating. All you need to do is go to the catching menu, set the frequency of the remote control key, press the red R record button and press the key on the remote control. Then stop recording to save it to the storage card. The exact same signal will be transmitted over the air, effectively replacing your remote key. TX Microphone: Receiver: You can easily listen to standard NFM and WFM radio signals by connecting your speaker to the Portapack’s 3.5mm radio jack. ADS B reception is easily enabled on the radio transceiver by selecting the inductor and symbol in the upper right corner. Hardware Configuration: 3.2 Inch, 240 x 320 RGB LCD With Resistive Touchscreen. Navigation Switches Radio Output Microphone Input DC 2.1 Connector 4 layer Gold Plating HAVOC Features Include: IQ File Playback Microphone FM Transmission With CTCSS CTCSS Decoder Frequency Manager (Save And Load From Storage Card With Categories And Comments) File Manager Soundboard File Player (Holds 8 Bit Mono Files) Storage Card, Wav Directory ADS B Receiver With Map View SSTV Transmitter Fully Configurable Transmitter Signals POCSAG Transmitter POCSAG Receiver, Decoder Morse Transmitter (FM and CW) OOK Transmitters for Common Remote Encoders (PT2262, Doorbells, Remote Outlets, Some Garages) RDS (Radio Data System) PSN, RadioText and Time Group Transmitters Weather Radio Sounder Receivers for M10 and M2K2 AFSK Receiver AFSK Transmitter (Bell202) Nuoptix DTMF Synchronization Transmitter TouchTunes Jukebox Universal Remote Control LCR (Language de Commande Routier) Message Generator Street Lighting Control Transmitter (CCIR tones) Play Dead for Emergencies Fully Configurable RF Signal Generator RSSI Radio Output for Pitch (for Direction Finding) Features: 4 Way Buttons, Scroll Wheel and Selector Buttons. Cell Battery for Saving Settings and Date, Time. Broadband (18MHz) Spectrum and Cascade Analysis. For mode runs for firmware for use with SDR host software. Calibrates PPM for more accurate adjustments. Sleep mode saves energy by turning off the display only. Instructions: When you place the PortaPack in for Mode, your will continue to work with the PC based SDR software. The radio transceiver is only compatible with for One. If your for Blue does not have a baseband connector installed, you should have no mechanical problems. 1 x Full Featured Radio Transceiver. 2 x Antenna Accessory. 1 x USB Cable. 1 x English Manual. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://hamradiotransceiver.biz/2024/10/radio-transceiver-1mhz-6ghz-sdr-featured-ham-radio-transceiver-with-5-antennaes-2/feed/ 0 https://hamradiotransceiver.biz/2024/08/portapack-h2-sdr-radio-transceiver-1mhz-6ghz-assembled/ https://hamradiotransceiver.biz/2024/08/portapack-h2-sdr-radio-transceiver-1mhz-6ghz-assembled/#comments Sat, 17 Aug 2024 17:12:00 +0000 https://hamradiotransceiver.biz/2024/08/portapack-h2-sdr-radio-transceiver-1mhz-6ghz-assembled/ read more]]>








Push To Talk? The Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio by using the 3.5mm audio jack. With the microphone plugged into the audio jack, simply press and hold the right button to push-to-talk. Capture & Replay Wireless Signal? One of the best things about the PortaPack is that it can easily capture and replay wireless signals like those from ISM frequency remote controls. NFM & WFM Audio Signal? Our Radio Receiver is equipped with 3.5mm audio jack, which makes you listen to standard NFM and WFM radio signals easily by connecting the speaker to it. Easy To Use? This SDR Radio Receiver is easy to connect and install. Press the black knob once to turn on and twice to turn off.

]]> https://hamradiotransceiver.biz/2024/08/portapack-h2-sdr-radio-transceiver-1mhz-6ghz-assembled/feed/ 0 https://hamradiotransceiver.biz/2024/06/radio-transceiver-1mhz-6ghz-sdr-featured-ham-radio-transceiver-with-5-antennaes/ https://hamradiotransceiver.biz/2024/06/radio-transceiver-1mhz-6ghz-sdr-featured-ham-radio-transceiver-with-5-antennaes/#comments Mon, 03 Jun 2024 06:49:47 +0000 https://hamradiotransceiver.biz/2024/06/radio-transceiver-1mhz-6ghz-sdr-featured-ham-radio-transceiver-with-5-antennaes/ read more]]>























3.5mm Sound Jack: This radio transceiver utilizes a 3.5mm sound jack, so with the microphone plugged in, you can simply press and hold the right side button to place a call. Catch And : This radio transceiver makes it very easy to catch and wireless signals from ISM band remotes. Hardware Complete: This radio transceiver features a 3.2 inch resistive touchscreen, navigation switches, radio outputs, microphone inputs, DC 2.1 interface, and 4 layer gold plating. All you need to do is go to the catching menu, set the frequency of the remote control key, press the red R record button and press the key on the remote control. Then stop recording to save it to the storage card. The exact same signal will be transmitted over the air, effectively replacing your remote key. TX Microphone: Using the 3.5mm radio jack, the radio transceiver can also be used as a standard push to talk or voice activated walkie talkie radio by the radio transceiver. Plug the microphone into the radio jack, you simply press and hold the right button to push to talk. If desired, you can also enable multiple CTCSS options, as well as tones that appear to be transmitted to the wireless headset Receiver: You can easily listen to standard NFM and WFM radio signals by connecting your speaker to the Portapack’s 3.5mm radio jack. ADS B reception is easily enabled on the radio transceiver by selecting the inductor and symbol in the upper right corner. Hardware Configuration: 3.2 Inch, 240 x 320 RGB LCD With Resistive Touchscreen. Navigation Switches Radio Output Microphone Input DC 2.1 Connector 4 layer Gold Plating HAVOC Features Include: IQ File Playback Microphone FM Transmission With CTCSS CTCSS Decoder Frequency Manager (Save And Load From Storage Card With Categories And Comments) File Manager Soundboard File Player (Holds 8 Bit Mono Files) Storage Card, Wav Directory ADS B Receiver With Map View SSTV Transmitter Fully Configurable Transmitter Signals POCSAG Transmitter POCSAG Receiver, Decoder Morse Transmitter (FM and CW) OOK Transmitters for Common Remote Encoders (PT2262, Doorbells, Remote Outlets, Some Garages) RDS (Radio Data System) PSN, RadioText and Time Group Transmitters Weather Radio Sounder Receivers for M10 and M2K2 AFSK Receiver AFSK Transmitter (Bell202) Nuoptix DTMF Synchronization Transmitter TouchTunes Jukebox Universal Remote Control LCR (Language de Commande Routier) Message Generator Street Lighting Control Transmitter (CCIR tones) Play Dead for Emergencies Fully Configurable RF Signal Generator RSSI Radio Output for Pitch (for Direction Finding) Features: 4 Way Buttons, Scroll Wheel and Selector Buttons. Coin Cell Battery for Saving Settings and Date, Time. Broadband (18MHz) Spectrum and Cascade Analysis. For mode runs for firmware for use with SDR host software. Calibrates PPM for more accurate adjustments. Sleep mode saves energy by turning off the display only. Instructions: When you place the PortaPack in for Mode, your will continue to work with the PC based SDR software. The radio transceiver is only compatible with for One. If your for Blue does not have a baseband connector installed, you should have no mechanical problems. 1 x Full Featured Radio Transceiver. 2 x Antenna Accessory. 1 x USB Cable. 1 x English Manual. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://hamradiotransceiver.biz/2024/06/radio-transceiver-1mhz-6ghz-sdr-featured-ham-radio-transceiver-with-5-antennaes/feed/ 0 https://hamradiotransceiver.biz/2023/12/hackrf-one-r9-v1-7-x-1mhz-6ghz-software-defined-radio-platform-gps-simulator-usa/ https://hamradiotransceiver.biz/2023/12/hackrf-one-r9-v1-7-x-1mhz-6ghz-software-defined-radio-platform-gps-simulator-usa/#comments Sat, 16 Dec 2023 14:21:15 +0000 https://hamradiotransceiver.biz/2023/12/hackrf-one-r9-v1-7-x-1mhz-6ghz-software-defined-radio-platform-gps-simulator-usa/ read more]]>












Upgrades of HackRF One R9 – HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. 1 x HackRF One + shield cover + aluminum alloy shell.

]]> https://hamradiotransceiver.biz/2023/12/hackrf-one-r9-v1-7-x-1mhz-6ghz-software-defined-radio-platform-gps-simulator-usa/feed/ 0 https://hamradiotransceiver.biz/2023/10/portapack-h2hackrf-one-r9-v1-7-05-antennasdata-cable-1mhz-6ghz-sdr-radiousa/ https://hamradiotransceiver.biz/2023/10/portapack-h2hackrf-one-r9-v1-7-05-antennasdata-cable-1mhz-6ghz-sdr-radiousa/#comments Sat, 21 Oct 2023 05:38:58 +0000 https://hamradiotransceiver.biz/2023/10/portapack-h2hackrf-one-r9-v1-7-05-antennasdata-cable-1mhz-6ghz-sdr-radiousa/ read more]]>













PortaPack H2 + HackRF One R9 V1.7.0 + 5 Antennas + Data Cable 1MHz-6GHz SDR Radio Assembled Upgrades of HackRF One R9: MAX2837 is replaced by MAX2839. Si5351C is replaced by Si5351A with additional clock distribution. A series diode is added to the antenna port power supply. The latest firmware is supported, and the current firmware is Mayhem firmware v1.7.0 by default. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2 and a FAT32 formatted MicroSD card over 1G. Hackrf One Description: – HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. Hackrf One Specifications: – 1 MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – For GNU Radio, SDR#, and the like – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware – HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board Description: The official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party’Havoc’ firmware is really what you’ll want to use with it since it contains many more decoders and transmit options. Progress of Work: 1. It has completed the program validation prototype. The latest documents in 2017, May are based on improvements. Catching and Replay: – One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy. To create a catching. You just need to enter the “Catching” menu, set the frequency of the remote key, press the red’R’ Record button and then press the key on the remote. Then stop the recording to save it to a SD Card. Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key. Microphone TX: – Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio jack simply hold down the right button to push to talk. If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones Other Transmitters: -There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches. There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage! Receivers: By connecting speakers to the Portapack’s 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled you can receive aircraft. Hardware Configuration: – 3.2-inch TFT240320 screen – Navigation switch – Audio output – Microphone input – DC 2.1 interface – 4-layer gold plate – ROSH process (exported to Europe and America) The latest version is updated with the latest documents in 2017, May. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot, Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). HAVOC Features Include: – IQ file replay – Microphone FM transmit with CTCSS – CTCSS decoder – Frequency manager (save & load from SD card, with categories and notes) – File manager – “Soundboard” wave file player (put 8-bit mono files in SD card /wav directory) – ADS-B receiver with map view – SSTV transmitter – Fully configurable transmit signals – POCSAG transmitter – POCSAG receiver/decoder – Morse transmitter (FM tone and CW) – OOK transmitter for common remote encoders PT2262, doorbells, remote outlets, some garage doors… RDS (Radio Data System) PSN, RadioText and Time groups transmitter – Meteorological radiosonde receiver for M10 and M2K2… AFSK receiver – AFSK transmitter Bell202… Nuoptix DTMF sync transmitter – TouchTunes jukebox universal remote – LCR (Language de Commande Routier) message generator – Street lighting control transmitter (CCIR tones) – “Play Dead” in case of emergency – Fully configurable RF signal generator – RSSI audio output as pitch (for direction finding) Features: – 3.2-inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver. Package List: – 1 x SDR Radio (PortaPack H2+HackRF One) – 1 x Data Cable – 5 x Antennas Note: – The product is assembled. Battery is included. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.

]]> https://hamradiotransceiver.biz/2023/10/portapack-h2hackrf-one-r9-v1-7-05-antennasdata-cable-1mhz-6ghz-sdr-radiousa/feed/ 0 https://hamradiotransceiver.biz/2023/09/hackrf-one-r9-v1-7-x-1mhz-6ghz-software-defined-radio-platformshell-4-antennas/ https://hamradiotransceiver.biz/2023/09/hackrf-one-r9-v1-7-x-1mhz-6ghz-software-defined-radio-platformshell-4-antennas/#comments Mon, 18 Sep 2023 03:38:33 +0000 https://hamradiotransceiver.biz/2023/09/hackrf-one-r9-v1-7-x-1mhz-6ghz-software-defined-radio-platformshell-4-antennas/ read more]]>












HackRF One R9 V1.7. X 1MHz-6GHz Software Defined Radio Platform GPS Simulator w/ Shell Four Antennas Upgrades of HackRF One R9: MAX2837 is replaced by MAX2839. Si5351C is replaced by Si5351A with additional clock distribution. A series diode is added to the antenna port power supply. The latest firmware is supported, and the current firmware is Mayhem firmware V1.7. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2 and a FAT32 formatted MicroSD card over 1G. Description: – HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. Specifications: – 1 MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – For GNU Radio, SDR#, and the like – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware – HackRF One 1 MHz to 6 GHz SDR Platform Software Defined Radio Development Board Package Included: – 1 x HackRF One + shield cover + aluminum alloy shell – 4 x SMA Antennas (40MHz-6GHz antenna; 2.4G/5/5.8G antenna; 70MHz-2700MHz antenna; 40MHz-860MHz antenna) – 1 x HackRF TCXO PPM0.1 GPS clock module – 1 x Micro USB cable for LG. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.

]]> https://hamradiotransceiver.biz/2023/09/hackrf-one-r9-v1-7-x-1mhz-6ghz-software-defined-radio-platformshell-4-antennas/feed/ 0 https://hamradiotransceiver.biz/2023/08/radio-transceiver-1mhz-6ghz-sdr-full-featured-ham-radio-transceiver-with5antennaes/ https://hamradiotransceiver.biz/2023/08/radio-transceiver-1mhz-6ghz-sdr-full-featured-ham-radio-transceiver-with5antennaes/#comments Wed, 23 Aug 2023 11:58:53 +0000 https://hamradiotransceiver.biz/2023/08/radio-transceiver-1mhz-6ghz-sdr-full-featured-ham-radio-transceiver-with5antennaes/ read more]]>























3.5mm Sound Jack: This radio transceiver utilizes a 3.5mm sound jack, so with the microphone plugged in, you can simply press and hold the right side button to place a call. Catch And : This radio transceiver makes it very easy to catch and wireless signals from ISM band remotes. Hardware Complete: This radio transceiver features a 3.2 inch resistive touchscreen, navigation switches, radio outputs, microphone inputs, DC 2.1 interface, and 4 layer gold plating. All you need to do is go to the catching menu, set the frequency of the remote control key, press the red R record button and press the key on the remote control. Then stop recording to save it to the storage card. The exact same signal will be transmitted over the air, effectively replacing your remote key. TX Microphone: Using the 3.5mm radio jack, the radio transceiver can also be used as a standard push to talk or voice activated walkie talkie radio by the radio transceiver. Plug the microphone into the radio jack, you simply press and hold the right button to push to talk. If desired, you can also enable multiple CTCSS options, as well as tones that appear to be transmitted to the wireless headset Receiver: You can easily listen to standard NFM and WFM radio signals by connecting your speaker to the Portapack’s 3.5mm radio jack. ADS B reception is easily enabled on the radio transceiver by selecting the inductor and symbol in the upper right corner. Hardware Configuration: 3.2 Inch, 240 x 320 RGB LCD With Resistive Touchscreen. Navigation Switches Radio Output Microphone Input DC 2.1 Connector 4 layer Gold Plating HAVOC Features Include: IQ File Playback Microphone FM Transmission With CTCSS CTCSS Decoder Frequency Manager (Save And Load From Storage Card With Categories And Comments) File Manager Soundboard Wave File Player (Holds 8 Bit Mono Files) Storage Card, Wav Directory ADS B Receiver With Map View SSTV Transmitter Fully Configurable Transmitter Signals POCSAG Transmitter POCSAG Receiver, Decoder Morse Transmitter (FM and CW) OOK Transmitters for Common Remote Encoders (PT2262, Doorbells, Remote Outlets, Some Garages) RDS (Radio Data System) PSN, RadioText and Time Group Transmitters Weather Radio Sounder Receivers for M10 and M2K2 AFSK Receiver AFSK Transmitter (Bell202) Nuoptix DTMF Synchronization Transmitter TouchTunes Jukebox Universal Remote Control LCR (Language de Commande Routier) Message Generator Street Lighting Control Transmitter (CCIR tones) Play Dead for Emergencies Fully Configurable RF Signal Generator RSSI Radio Output for Pitch (for Direction Finding) Features: 4 Way Buttons, Scroll Wheel and Selector Buttons. Coin Cell Battery for Saving Settings and Date, Time. Broadband (18MHz) Spectrum and Cascade Analysis. For mode runs for firmware for use with SDR host software. Calibrates PPM for more accurate adjustments. Sleep mode saves energy by turning off the display only. Instructions: When you place the PortaPack in for Mode, your will continue to work with the PC based SDR software. The radio transceiver is only compatible with for One. If your for Blue does not have a baseband connector installed, you should have no mechanical problems. 1 x Full Featured Radio Transceiver. 2 x Antenna Accessory. 1 x USB Cable. 1 x English Manual. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

]]> https://hamradiotransceiver.biz/2023/08/radio-transceiver-1mhz-6ghz-sdr-full-featured-ham-radio-transceiver-with5antennaes/feed/ 0 https://hamradiotransceiver.biz/2021/12/1mhz-6ghz-hackrf-one-open-source-sdr-platform-board-aluminum-alloy-shell-tps/ https://hamradiotransceiver.biz/2021/12/1mhz-6ghz-hackrf-one-open-source-sdr-platform-board-aluminum-alloy-shell-tps/#comments Sun, 12 Dec 2021 22:51:59 +0000 https://hamradiotransceiver.biz/2021/12/1mhz-6ghz-hackrf-one-open-source-sdr-platform-board-aluminum-alloy-shell-tps/ read more]]>










1MHz-6GHz HackRF One Open Source SDR Platform SDR Development Board + Aluminum Alloy Shell Taking the receiving process as an example, the flow after the signal enters from the antenna is as follows: · The RF switch determines whether to amplify via a 14dB amplifier · High-pass or low-pass filtering of the signal through the image suppression filter · The signal is mixed with RFFC5072 chip to 2.6GHz fixed intermediate frequency ·The latest firmware supports the option of variable IF · Intermediate frequency range 2.150GHz-2.750GHz · The signal is fed into the MAX2837 chip and mixed to the baseband to output a differential IQ signal · The MAX2837 chip can limit the bandwidth of the signal · MAX5864 chip digitizes the baseband signal and sends it to CPLD and single chip TODO FIXME · CPLD ·The LPC4320/4330 processor sends the sampled data to the computer via USB ·Put RFFC5072 and MAX2837 into the shield to protect them, prevent the interference of the outside world and other chips on the board, and try to prevent static electricity from puncturing some chips. Technical Parameters/Main Hardware: Basic Parameters: – Design frequency: 1MHz-6000MHz – Data bandwidth: 20MHz – Sampling accuracy ADC/DAC: 8bit – Sampling rate ADC/DAC: 20Mbps – Data/power supply interface: USB 2.0 – Open source level: all open source (software, hardware) RF Index: – Maximum transmit power: 10dBm (less than the minimum spurious transmit power of radio regulations) – Maximum received power: -5dBm (note: exceeding this value will burn the board) – 64QAM launch EVM: 1.5% – Complex sampling bandwidth: 20MHz Main Hardware: – RFFC5072: mixer provides 80MHz to 4200MHz local oscillator signal – MAX2837: 2.3GHz to 2.7GHz wireless broadband RF transceiver – MAX5864: ADC/DAC, 22MHz sampling accuracy 8bit – LPC4320/4330: For ARM Cortex M4 processor, main frequency 204MHz – Si5351B: I2C programmable arbitrary clock generator for CMOS, provides 40MHz and sampling clock by 800MHz frequency division – MGA-81563: 0.1-6GHz 3v 14dBm amplifier – SKY13317: 20MHz-6.0GHz RF single-pole three-throw (SP3T) switch – SKY13350: 0.01-6.0GHz RF single pole double-throw (SPDT) switch Package Included: – 1 x Set of HackRF One Note: Antenna is not included in the package. Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days. The item “1MHz-6GHz HackRF One Open Source SDR Platform Board + Aluminum Alloy Shell tps” is in sale since Monday, June 15, 2020. This item is in the category “Handys & Kommunikation\Funktechnik\Amateurfunk\Amateurfunk-Sendeempfänger”. The seller is “panda201898″ and is located in Shenzhen. This item can be shipped worldwide.

• Frequenzband: 1MHz-6GHz
• Marke: Markenlos
• Herstellernummer: Nicht zutreffend
• Herstellergarantie: 1 Jahr
• Produktart: HackRF One
• Herstellungsland und -region: China
• Data bandwidth: 20MHz

]]> https://hamradiotransceiver.biz/2021/12/1mhz-6ghz-hackrf-one-open-source-sdr-platform-board-aluminum-alloy-shell-tps/feed/ 0 https://hamradiotransceiver.biz/2021/11/hackrf-one-portapack-h2-5-antennas-data-cable-sdr-radio-1mhz-6ghz-kits-tp/ https://hamradiotransceiver.biz/2021/11/hackrf-one-portapack-h2-5-antennas-data-cable-sdr-radio-1mhz-6ghz-kits-tp/#comments Fri, 19 Nov 2021 13:06:50 +0000 http://hamradiotransceiver.biz/2021/11/hackrf-one-portapack-h2-5-antennas-data-cable-sdr-radio-1mhz-6ghz-kits-tp/ read more]]>










HackRF One + Portapack H2 + 5 Antennas + Data Cable SDR Radio 1MHz-6GHz Unassembled Black Hardware Configuration: – 3.2 TFT 240 320 screen – Navigation switch – Audio output – Microphone input – DC 2.1 interface – 4-layer gold plate – ROSH process (exported to Europe and America) Add a PortaPack to your software defined radio HackRF, and leave your laptop behind! The PortaPack connects to your HackRF and adds an LCD touchscreen, navigation controls, headphone jack, real-time clock, micro SD card slot. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware works with fast processors for ARM in your HackRF. No computer is needed (except for firmware reprogramming). Functions: – 3.2, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow buttons, rotary wheel and select button. Coin battery to preserve settings and date / time. Broadband (18MHz) spectrum and cascade analysis. Monitoring of boat (AIS), automobile (TPMS), E utility counter transponder (ITRON ERT). HackRF mode runs HackRF firmware for use with the SDR host computer software. Calibration PPM for more accurate tuning. Sleep mode saves energy by turning off the display only. Features: – Your HackRF will continue to work with the computer-based SDR software when you put the PortaPack in “HackRF mode”. PortaPack is only compatible with the HackRF Uno. It is not compatible with the first HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should be fine. Compatibility with the HackRF Blu is experimental. A proprietary Blu reported good results with less interference between the audio capacitors PortaPack and the mechanical header band. If your Blue HackRF doesn’t have a header band installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, although they vary widely in quality and poorly designed batteries can inject noise voltage regulator into the radio. PortaPack and HackRF of Un will not replace your handheld ham radio receiver. Reception sensitivity varies from band to band, but will not perform as well as a real ham radio receive. Package Included: – 1 x Set of SDR Radio Note: – Assembling is needed. Battery is included. How to turn it on? Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days. The item “HackRF One + Portapack H2 + 5 Antennas + Data Cable SDR Radio 1MHz-6GHz Kits tp” is in sale since Friday, December 25, 2020. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment”. The seller is “topskyrc” and is located in Shenzhen. This item can be shipped worldwide.

• To Fit: Ham Radio Transceiver
• Compatible Brand: Universal
• Type: SDR Radio
• MPN: Does not apply
• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2021/11/hackrf-one-portapack-h2-5-antennas-data-cable-sdr-radio-1mhz-6ghz-kits-tp/feed/ 0