Ham Radio Transceiver

Ham Radio Transceiver » 70mhz-6ghz https://hamradiotransceiver.biz Tue, 21 Apr 2026 23:59:42 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 SDR Radio PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio USA https://hamradiotransceiver.biz/2025/10/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa-2/ https://hamradiotransceiver.biz/2025/10/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa-2/#comments Wed, 08 Oct 2025 13:23:42 +0000 https://hamradiotransceiver.biz/2025/10/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa-2/ read more]]>

SDR Radio PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio USA

SDR Radio PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio USA received all signal types.

]]> https://hamradiotransceiver.biz/2025/10/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa-2/feed/ 0 SDR Radio PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio USA https://hamradiotransceiver.biz/2025/07/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa/ https://hamradiotransceiver.biz/2025/07/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa/#comments Sun, 20 Jul 2025 16:51:44 +0000 https://hamradiotransceiver.biz/2025/07/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa/ read more]]>
SDR Radio PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio USA

PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio For Gigabit Ethernet Micro SD Card Product Overview: PLUTO+ is a software-defined radio platform that supports 2TX and 2RX, supports Gigabit Ethernet and Micro SD card. It refers to the design for well-known ADI ADALM-PLUTO and improves its shortcomings. Features: – ADC/DAC: AD9363 (Can hack to AD9361 or AD9364) – 2 Transmit, 2 Receiving channel – RF Range: 70MHZ6GHZ – Ref Clock: VCTCXO 40MHZ 0.5ppm – SOC: for Zynq7010 FPGA: 28k – RAM: 512M – FLASH: 32M – USB: 2.0, support OTG – Ethernet: 1000Mb – Micro SD can use to boot – DC IN: 5V±0.5V-2A microUSB Interfaces: Please note that all IO levels are 1.8V. 3.1 When using the official firmware for ADI-PlutoSDR, please connect to URST-MI052. 3.2 When using Pluto+ firmware and need to support Ethernet, please connect URST-MIO46 3.3 When using SD card to boot, please connect SD-H to 1V8 3.4 When using JTAG to debug, please connect JTAG# to GND 3.5 Please connect EXCLK to GND when using external reference clock input PTT Key Port: – PTT drives optocouplers through GPIO0 (MI00), which requires an external relay or control circuit. DFU KEY: – At any time, you can press the DFU button and power on PLUTO+ again to enter the DFU mode, but you need to connect the URST jumper to MI052. Ref CLK input IPEX: – You can connect a cable to input an external high-precision reference clock for AD9363 through the IPEX interface. The main level should not exceed 3.3V, and the EXCLK jumper needs to be connected to GND to turn off the built-in clock Calibrate the Frequency of Built-in VCTCXO: – The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided that you have a reference signal source. Micro-SD: Support booting via SD card, need to connect SD-H jumper to 1V8. Package Included: – 1 x SDR Radio PLUTO+ – 2 x USB Cables. Note: – It is assembled and ready to use. SD card is not included in the package. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
SDR Radio PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio USA

]]> https://hamradiotransceiver.biz/2025/07/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa/feed/ 0 70MHz-6GHz Zynq7020+AD9363 SDR Radio Development Board for Pluto SDR https://hamradiotransceiver.biz/2025/05/70mhz-6ghz-zynq7020ad9363-sdr-radio-development-board-for-pluto-sdr/ https://hamradiotransceiver.biz/2025/05/70mhz-6ghz-zynq7020ad9363-sdr-radio-development-board-for-pluto-sdr/#comments Sat, 03 May 2025 21:10:49 +0000 https://hamradiotransceiver.biz/2025/05/70mhz-6ghz-zynq7020ad9363-sdr-radio-development-board-for-pluto-sdr/ read more]]>

70MHz-6GHz Zynq7020+AD9363 SDR Radio Development Board for Pluto SDR

70MHz-6GHz Zynq7020+AD9363 SDR Software Defined Radio Development Board for Pluto SDR Improvements: – Update firmware V0.38, hacked to AD9361, supports 70MHz-6GHz, dual transmitting and receiving, and supports both USB and Ethernet ports. Improved power supply stability. Adding 9363 external input clock interface. Features: – AD9363 chip, replacing AD9361, with frequency range of 70MHz6GHz. Current laboratory tests show that there is not significant differences between these two chips. Board size: about 5 x 8cm – Peripheral: double DDR, 1GB – For N25Q128 FLASH, can be used to start. One channel SD card, can be used to start. Integrated FT2232 debugger, with serial port. PS end USB2.0. PS end gigabit Ethernet port. PL end with crystal oscillator, can drive AD9363 with pure PL. Support external input of local oscillator. Supported Software: – For IIO Oscillscope, SDR Sharp, GNU Radio, MATLAB, and other software that support for libiio. Package Included: – 1 x SDR Development Board – 1 x SD Card. 70MHz-6GHz Zynq7010+AD9363 SDR Software Defined Radio Development Board for Pluto SDR MATLAB Improvements: – Update firmware V0.38, hacked to AD9361, supports 70MHz-6GHz, dual transmitting and receiving, and supports both USB and Ethernet ports. Note: – Please contact our customer service for firmware resources after receiving the product. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
70MHz-6GHz Zynq7020+AD9363 SDR Radio Development Board for Pluto SDR

Incoming search terms:

Liber SDR 7020 Software Radio AD9363 схема
Zynq7020 AD9363 SDR

]]> https://hamradiotransceiver.biz/2025/05/70mhz-6ghz-zynq7020ad9363-sdr-radio-development-board-for-pluto-sdr/feed/ 0 PLUTO+ SDR Transceiver Radio 70MHz-6GHz SDR For Gigabit Ethernet Micro SD Card https://hamradiotransceiver.biz/2024/10/pluto-sdr-transceiver-radio-70mhz-6ghz-sdr-for-gigabit-ethernet-micro-sd-card/ https://hamradiotransceiver.biz/2024/10/pluto-sdr-transceiver-radio-70mhz-6ghz-sdr-for-gigabit-ethernet-micro-sd-card/#comments Fri, 04 Oct 2024 05:32:01 +0000 https://hamradiotransceiver.biz/2024/10/pluto-sdr-transceiver-radio-70mhz-6ghz-sdr-for-gigabit-ethernet-micro-sd-card/ read more]]>

PLUTO+ SDR Transceiver Radio 70MHz-6GHz SDR For Gigabit Ethernet Micro SD Card

PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio For Gigabit Ethernet Micro SD Card Product Overview: PLUTO+ is a software-defined radio platform that supports 2TX and 2RX, supports Gigabit Ethernet and Micro SD card. It refers to the design for well-known ADI ADALM-PLUTO and improves its shortcomings. Features: – ADC/DAC: AD9363 (Can hack to AD9361 or AD9364) – 2 Transmit, 2 Receiving channel – RF Range: 70MHZ6GHZ – Ref Clock: VCTCXO 40MHZ 0.5ppm – SOC: for Zynq7010 FPGA: 28k – RAM: 512M – FLASH: 32M – USB: 2.0, support OTG – Ethernet: 1000Mb – Micro SD can use to boot – DC IN: 5V±0.5V-2A microUSB Interfaces: Please note that all IO levels are 1.8V. 3.1 When using the official firmware for ADI-PlutoSDR, please connect to URST-MI052. 3.2 When using Pluto+ firmware and need to support Ethernet, please connect URST-MIO46 3.3 When using SD card to boot, please connect SD-H to 1V8 3.4 When using JTAG to debug, please connect JTAG# to GND 3.5 Please connect EXCLK to GND when using external reference clock input PTT Key Port: – PTT drives optocouplers through GPIO0 (MI00), which requires an external relay or control circuit. DFU KEY: – At any time, you can press the DFU button and power on PLUTO+ again to enter the DFU mode, but you need to connect the URST jumper to MI052. Ref CLK input IPEX: – You can connect a cable to input an external high-precision reference clock for AD9363 through the IPEX interface. The main level should not exceed 3.3V, and the EXCLK jumper needs to be connected to GND to turn off the built-in clock Calibrate the Frequency of Built-in VCTCXO: – The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided that you have a reference signal source. Micro-SD: Support booting via SD card, need to connect SD-H jumper to 1V8. Package Included: – 1 x SDR Radio PLUTO+ Note: – It is assembled and ready to use. SD card is not included in the package. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
PLUTO+ SDR Transceiver Radio 70MHz-6GHz SDR For Gigabit Ethernet Micro SD Card

]]> https://hamradiotransceiver.biz/2024/10/pluto-sdr-transceiver-radio-70mhz-6ghz-sdr-for-gigabit-ethernet-micro-sd-card/feed/ 0 AD9361 RF 70MHz-6GHz SDR Software Defined Radio USB3.0 for ETTUS USRP B210 https://hamradiotransceiver.biz/2021/09/ad9361-rf-70mhz-6ghz-sdr-software-defined-radio-usb3-0-for-ettus-usrp-b210/ https://hamradiotransceiver.biz/2021/09/ad9361-rf-70mhz-6ghz-sdr-software-defined-radio-usb3-0-for-ettus-usrp-b210/#comments Sat, 25 Sep 2021 15:34:26 +0000 http://hamradiotransceiver.biz/2021/09/ad9361-rf-70mhz-6ghz-sdr-software-defined-radio-usb3-0-for-ettus-usrp-b210/ read more]]>

AD9361 RF 70MHz-6GHz SDR Software Defined Radio USB3.0 for ETTUS USRP B210

Welcome to my shop. 2020 AD9361 RF 70MHz-6GHz SDR Software Defined Radio USB3.0 for ETTUS USRP B210. AD9361 RF 70MHz-6GHz SDR Software Defined Radio USB3.0 Compatible with ETTUS USRP B210. Features: 61046 – First fully integrated, two-channel USRP device with continuous RF coverage from 70 MHz – 6 GHz – Full duplex, MIMO (2 Tx & 2 Rx) operation with up to 56 MHz of real-time bandwidth (61.44MS/s quadrature) – Fast and convenient Super Speed USB 3.0 connectivity – GNURadio and OpenBTS support through the open-source USRP Hardware Driver (UHD) – Open and reconfigurable Spartan 6 XC6SLX150 FPGA (for advanced users) – Early access prototyping platform for the Analog Devices AD9361 RFIC, a fully integrated direct conversion transceiver with mixed signal baseband Description: – The USRP B210 provides a fully integrated, single-board, Universal Software Radio Peripheral (USRPT) platform with continuous frequency coverage from 70 MHz – 6 GHz. Designed for low-cost experimentation, it combines the AD9361 RFIC direct-conversion transceiver providing up to 56MHz of real-time bandwidth, an open and reprogrammable Spartan6 FPGA, and fast SuperSpeed USB 3.0 connectivity with convenient bus-power. Full support for the USRP Hardware DriverT (UHD) software allows you to immediately begin developing with GNU Radio, prototype your own GSM base station with OpenBTS, and seamless transition code from the USRP B210 to higher performance, industry-ready USRP platforms. An enclosure accessory kit is available to users of green PCB devices (revision 6 or later) to assemble a protective steel case. Experimentation with Low-cost SDR Experiment with the USRP B210 across a wide range of applications including: FM and TV broadcast, cellular, GPS, WiFi, ISM, and more. Users can immediately begin prototyping in GNURadio and participate in the open-source SDR community. Full support by the UHD software allows seamless code reuse from existing designs, compatibility with open-source applications like HDSDR and OpenBTS, and an upgrade path to industry-ready USRP systems to meet application requirements. Here are some examples of what you can do with a USRP B210. B210 System Architecture The integrated RF frontend on the USRP B210 is designed with the new Analog Devices AD9361, a single-chip direct-conversion transceiver, capable of streaming up to 56 MHz of real-time RF bandwidth. The B210 uses both signal chains of the AD9361, providing coherent MIMO capability. Onboard signal processing and control of the AD9361 is performed by a Spartan6 XC6SLX150 FPGA connected to a host PC using SuperSpeed USB 3.0. The USRP B210 real time throughput is benchmarked at 61.44MS/s quadrature, providing the full 56 MHz of instantaneous RF bandwidth to the host PC for additional processing using GNU Radio or applications that use the UHD API. For detailed throughput capabilities in various SISO and MIMO configurations, please see the USRP B200/B210 Benchmark Table. Package Included: – 1 x Software Defined Radio – 1 x USB3.0 Cable. Please make sure it is correct. We believe our items are so outstanding. All products are quality checked. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and friendly manner. We appreciate your Postive Feedback, and will do the same in return. The item “AD9361 RF 70MHz-6GHz SDR Software Defined Radio USB3.0 for ETTUS USRP B210″ is in sale since Tuesday, March 5, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “flyxy2015″ and is located in ShenZhen ,Guangdong. This item can be shipped worldwide.

Brand: Unbranded/Generic
MPN: Does Not Apply
UPC: Does Not Apply
EAN: Does Not Apply

Incoming search terms:

программное обеспечение для SDR usrp B210

]]> https://hamradiotransceiver.biz/2021/09/ad9361-rf-70mhz-6ghz-sdr-software-defined-radio-usb3-0-for-ettus-usrp-b210/feed/ 0