https://hamradiotransceiver.biz Tue, 09 Jun 2026 05:12:52 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2026/02/dual-band-222-440-to-28-mhz-8watts-assembled-transverter-vhf-uhf-28mhz/ https://hamradiotransceiver.biz/2026/02/dual-band-222-440-to-28-mhz-8watts-assembled-transverter-vhf-uhf-28mhz/#comments Mon, 16 Feb 2026 07:31:48 +0000 https://hamradiotransceiver.biz/2026/02/dual-band-222-440-to-28-mhz-8watts-assembled-transverter-vhf-uhf-28mhz/ read more]]>










222 MHz + 440 MHz to 28 MHz Dual Band Assembled Mean Power Transverter. Add more bands to your HF radio!! With high frequency stability and extended bands. We have installed a highly stable frequency synthesizer in this model. This allowed us to obtain a long-term stability of 0.2 ppm and to extend the operating range of the transverter 222 – 226 MHz and 440 – 450 MHz with your HF radio frequency 25 – 30 MHz. High frequency stability allows you to work in FM, SSB, CW and even digital modes (FT8, JT65 and etc) with output power 8 watts on 222 and 3.5 watts on 440. It is specially developed for severe conditions of reception – contests, DXing, the neighboring powerful broadcasting and amateur stations. The mixer is made on special HI-frequency. Chip with whopping dynamic range. This transverter includes everything you need to use in conjunction with a HF transceiver with output power of 5-10 watts. Contains the input attenuator and the switch of the bypass on the HF antenna. In the bypass mode, the permissible power is 100 watts. When turning the transverter power on, the HF antenna is turned off and the transverter output is connected. The PTT control of the transverter is automatic with RF power. Due to the automatic switching mode of the attenuator when the RF is applied, even a power of 100 watts, randomly applied to the input, will not be dangerous. Then only set the optimal power of 5-10 watts, and that’s it. For SSB, the transmission is held in speech pauses, and the TX to RX after the HF removal is about 0.5 sec. This transverter is fully assembled and configured in the UR3LMZ laboratory. It has a strong aluminum box. All inscriptions are marked with a modern laser engraving method. The inscriptions are not erased and have a very beautiful appearance. Information about this transverter. 226MHz and 440…450Mhz. DC current is 12V to 14V. Current consumption 3A (TX). LO frequency 222Mhz – 194 MHz and 196 MHz to push F+. LO frequency 440Mhz – 415 MHz and 420 MHz to push F+. LO accuracy at 18C typ +/- 0.1ppm. LO freq stability -20… +70 C +/- 0.2ppm. IF RF input power on 28mhz is 5 to 10Wt. Output power on 222 mhz up to 8 Wt. Output power on 440 mhz up to 5 Wt. Dynamic range IP3 +17dBm typ. Noise figure 1.0dB max 1.5dB on 440 MHz. RF connectors type BNC standart. Size of the transverter 10 x 10 x 4 cm (4 x 4 x 1.6 in). Weight 0,35kg (12 oz). To byu TRANSVERTER on other bands or another model, please, see.

]]> https://hamradiotransceiver.biz/2026/02/dual-band-222-440-to-28-mhz-8watts-assembled-transverter-vhf-uhf-28mhz/feed/ 0 https://hamradiotransceiver.biz/2024/08/portapack-h2-sdr-radio-transceiver-1mhz-6ghz-assembled/ https://hamradiotransceiver.biz/2024/08/portapack-h2-sdr-radio-transceiver-1mhz-6ghz-assembled/#comments Sat, 17 Aug 2024 17:12:00 +0000 https://hamradiotransceiver.biz/2024/08/portapack-h2-sdr-radio-transceiver-1mhz-6ghz-assembled/ read more]]>








Push To Talk? The Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio by using the 3.5mm audio jack. With the microphone plugged into the audio jack, simply press and hold the right button to push-to-talk. Capture & Replay Wireless Signal? One of the best things about the PortaPack is that it can easily capture and replay wireless signals like those from ISM frequency remote controls. NFM & WFM Audio Signal? Our Radio Receiver is equipped with 3.5mm audio jack, which makes you listen to standard NFM and WFM radio signals easily by connecting the speaker to it. Easy To Use? This SDR Radio Receiver is easy to connect and install. Press the black knob once to turn on and twice to turn off.

]]> https://hamradiotransceiver.biz/2024/08/portapack-h2-sdr-radio-transceiver-1mhz-6ghz-assembled/feed/ 0 https://hamradiotransceiver.biz/2022/11/144mhz-to-28mhz-assembled-transverter-hd-for-flex-radio-vhf-uhf-15wt-conwerter/ https://hamradiotransceiver.biz/2022/11/144mhz-to-28mhz-assembled-transverter-hd-for-flex-radio-vhf-uhf-15wt-conwerter/#comments Sat, 12 Nov 2022 00:29:31 +0000 https://hamradiotransceiver.biz/2022/11/144mhz-to-28mhz-assembled-transverter-hd-for-flex-radio-vhf-uhf-15wt-conwerter/ read more]]>









High Dynamic Transverter to Flex radios. Up for sale New Generation of UR3LMZ – TR2020 Mini transverter for FLEX radios. We specially designed this transverter for easy connection to Flex radio, SDR and other similar radios. You only need a couple of cables to connect to your radio and you can work on VHF with all kinds of modulation. It is specially developed for severe conditions of reception – contests, DXing, the neighboring powerful broadcasting and amateur stations. The mixer is made on special HI-frequency. With whopping dynamic range. IP3 + 17dBm typ. We made some improvements, improved the circuit, and now the transverter has an output power of 15 watts on VHF. 75 x 85 x 35mm 2.95? 3.35 x 1.35 in. Will allow you to successfully use the transverter in. Near the antenna in a sealed box, in the attic of your home or just on the top shelf. We are offering completely built and tested in UR3LMZ lab assembled transverter that comes with the English description which contains the circuit diagram of this transverter and diagram of how you can connect to your Flex. 1 mW / 0 dBm. Contact closure to ground. +13.8 V DC +12… RX Input chip – ADE. Dynamic range IP3 + 17dBm typ. Dimensions (mm) – 75 x 85 x 35mm 2.95? RF sockets type – SMA. USA, Canada 3 weeks. Africa, South America, Asia, Australia 4-6 weeks. We will try our best to solve the problem for you. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “andreyfan” and is located in this country: UA. This item can be shipped worldwide.

• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2022/11/144mhz-to-28mhz-assembled-transverter-hd-for-flex-radio-vhf-uhf-15wt-conwerter/feed/ 0 https://hamradiotransceiver.biz/2022/11/high-quality-assembled-1-8-55mhz-100w-atu-100-mini-automatic-antenna-tuner/ https://hamradiotransceiver.biz/2022/11/high-quality-assembled-1-8-55mhz-100w-atu-100-mini-automatic-antenna-tuner/#comments Mon, 07 Nov 2022 11:54:51 +0000 https://hamradiotransceiver.biz/2022/11/high-quality-assembled-1-8-55mhz-100w-atu-100-mini-automatic-antenna-tuner/ read more]]>








High Quality Assembled 1.8-55Mhz 100W ATU-100 Mini Automatic Antenna Tuner Features: The device consists of a set of seven capacitors and seven inductors, which enables it (with the largest configuration) to work effectively in the broadband, 1.8-55 MHz amateur radio HF band. High quality plasric housing, stable and reliable performance, practical, easy to operate and use, has a long service life. The antenna tuner is automatically tuned without any control wires, suitable for most radio stations. Power supply voltage: USB charging or you can install battery in it. Automatic antenna tuner is assembled, no need install by yourself. Specifications: Size: 14.5X9cm/5.51X3.54in Weight:400g/0.88lb Material: Plastic Maximum Current Consumption: 400ma Maximum Working Power: 100w Maximum Possible Measured Power: 150w Minimum Power Required To Start Tuning: 5w Minimum Possible Measured Power: 0.1w Measurement Steps With Power Up To 10w: 0.1w Measurement Steps With Power Higher Than 10w: 1w Power Measurement Accuracy: 10% Maximum Installed Inductance: 8.53uh Minimum Installation Inductance Step: 0.05uh Maximum Installed Capacitance: 1869pf Minimum Installation Capacitance Step: 10pf Number Of Panel Buttons: Power Pow, Direct, Automatic, Function Package Includes: 1 Mini Automatic Antenna Tuner note: Due to the problems of lighting effects and shooting angles, there will be certain tolerances in the product, please understand. Please allow 0-1cm error due to the manual measurment. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “yuan99_6″ and is located in this country: CN. This item can be shipped worldwide.

• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2022/11/high-quality-assembled-1-8-55mhz-100w-atu-100-mini-automatic-antenna-tuner/feed/ 0 https://hamradiotransceiver.biz/2021/12/hackrf-oneupgraded-portapack-h2-3-2-lcd-antennausb-cable-assembled-tzt-sz/ https://hamradiotransceiver.biz/2021/12/hackrf-oneupgraded-portapack-h2-3-2-lcd-antennausb-cable-assembled-tzt-sz/#comments Wed, 08 Dec 2021 10:33:44 +0000 https://hamradiotransceiver.biz/2021/12/hackrf-oneupgraded-portapack-h2-3-2-lcd-antennausb-cable-assembled-tzt-sz/ read more]]>













HackRF One + Upgraded PortaPack H2 3.2 LCD + Plastic Shell Assembled + Antenna + USB Cable. 1 x SDR Radio (Upgraded PortaPack H2+HackRF One). 1 x 40MHz-6GHz Antenna. 1 x USB Cable. Note: It is assembled and ready for use. The official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party’Havoc’ firmware is really what you’ll want to use with it since it contains many more decoders and transmit options. It has completed the program validation prototype. The latest documents in 2017, May are based on improvements. One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy. To create a catching. You just need to enter the “Catching” menu, set the frequency of the remote key, press the red’R’ Record button and then press the key on the remote. Then stop the recording to save it to a SD Card. Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key. Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio. Jack simply hold down the right button to push to talk. If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones. There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches. There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage! By connecting speakers to the Portapack’s 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the. PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled you can receive aircraft. 3.2-inch TFT240320 screen. DC 2.1 interface. 4-layer gold plate. ROSH process (exported to Europe and America). The latest version is updated with the latest documents in 2017, May. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls. Headphone jack, real-time clock, micro SD card slot. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). IQ file replay. Microphone FM transmit with CTCSS. Frequency manager (save & load from SD card, with categories and notes). “Soundboard” wave file player (put 8-bit mono files in SD card /wav directory). ADS-B receiver with map view. Fully configurable transmit signals. Morse transmitter (FM tone and CW). OOK transmitter for common remote encoders PT2262, doorbells, remote outlets, some garage doors… RDS (Radio Data System) PSN, RadioText and Time groups transmitter. Meteorological radiosonde receiver for M10 and M2K2… AFSK transmitter Bell202… Nuoptix DTMF sync transmitter. TouchTunes jukebox universal remote. LCR (Language de Commande Routier) message generator. Street lighting control transmitter (CCIR tones). “Play Dead” in case of emergency. Fully configurable RF signal generator. RSSI audio output as pitch (for direction finding). 3.2-inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Micro SD card slot for data and code storage. Some features demonstrated in 2016 February 22 firmware video. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF. The PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference. Between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver. Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days. The item “HackRF One+Upgraded PortaPack H2 3.2 LCD +Antenna+USB Cable Assembled tzt-sz” is in sale since Saturday, February 6, 2021. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “buyfromtzt” and is located in Shenzhen. This item can be shipped worldwide.

• Model: HackRF One + H2
• Type: Ham Radio Transceiver
• MPN: Does not apply
• Brand: HackRF One
• Manufacturer Warranty: Lifetime

]]> https://hamradiotransceiver.biz/2021/12/hackrf-oneupgraded-portapack-h2-3-2-lcd-antennausb-cable-assembled-tzt-sz/feed/ 0 https://hamradiotransceiver.biz/2021/08/dual-band-50-70-to-28-mhz-10watts-assembled-transverter-vhf-uhf-28mhz/ https://hamradiotransceiver.biz/2021/08/dual-band-50-70-to-28-mhz-10watts-assembled-transverter-vhf-uhf-28mhz/#comments Fri, 27 Aug 2021 10:58:41 +0000 http://hamradiotransceiver.biz/2021/08/dual-band-50-70-to-28-mhz-10watts-assembled-transverter-vhf-uhf-28mhz/ read more]]>







50 MHz + 70 MHz to 28 MHz Dual Band Assembled Mean Power Transverter. Add more bands to your HF radio!! New Generation of UR3LMZ. Dual Band 50 MHz + 70 MHz transverter with high dynamic range and MEAN POWER – 10Wtts on 50 and 10Wtts on 70 mhz It is specially developed for severe conditions of reception – contests, DXing, the neighboring powerful broadcasting and amateur stations. The mixer is made on special HI-frequency ADE chip with whopping dynamic range IP3 + 17dBm typ. This transverter includes everything you need to use in conjunction with a HF transceiver with output power of 5-10 watts. Contains the input attenuator and the switch of the bypass on the HF antenna. In the bypass mode, the permissible power is 100 watts. When turning the transverter power on, the HF antenna is turned off and the transverter output is connected. The PTT control of the transverter is automatic with RF power. Due to the automatic switching mode of the attenuator when the RF is applied, even a power of 100 watts, randomly applied to the input, will not be dangerous. Then only set the optimal power of 5-10 watts, and that’s it. For SSB, the transmission is held in speech pauses, and the TX to RX after the HF removal is about 0.5 sec. This transverter is fully assembled and configured in the UR3LMZ laboratory. It has a strong aluminum box. All inscriptions are marked with a modern laser engraving method. The inscriptions are not erased and have a very beautiful appearance. Information about this transverter. DC current is 12V to 14V. Current consumption 3A (TX). LO freq is 22MHz and 42MHz. LO freq stability +/- 3ppm. IF RF input power on 28mhz is 5 to 10Wt. Output power on 50 mhz 10Wt. Output power on 70 mhz 10Wt. Dynamic range IP3 +17dBm typ. Noise figure 1.0dB max 1.5dB on 70 MHz. RF connectors type BNC standart. Size of the transverter 10 10 4 cm (4 4 1.6 in). Weight 0,35kg (12 oz). To byu TRANSVERTER on other bands or another model, please, see. The item “Dual Band 50 + 70 to 28 MHz 10Watts ASSEMBLED TRANSVERTER VHF UHF 28mhz” is in sale since Friday, May 4, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hfvhfparts” and is located in EUROPE. This item can be shipped worldwide.

• Country/Region of Manufacture: Ukraine
• Type: Transverter
• Supported Modes: AM
• MPN: Does Not Apply
• Frequency Band(s): HF
• Mono/Multi Band: Dual Band
• Brand: Unbranded/Generic

]]> https://hamradiotransceiver.biz/2021/08/dual-band-50-70-to-28-mhz-10watts-assembled-transverter-vhf-uhf-28mhz/feed/ 0 https://hamradiotransceiver.biz/2021/08/dvmega-dualband-vhfuhf-bluestack-assembled-digital-hot-spot-app-control-mmdvm/ https://hamradiotransceiver.biz/2021/08/dvmega-dualband-vhfuhf-bluestack-assembled-digital-hot-spot-app-control-mmdvm/#comments Thu, 12 Aug 2021 22:07:47 +0000 http://hamradiotransceiver.biz/2021/08/dvmega-dualband-vhfuhf-bluestack-assembled-digital-hot-spot-app-control-mmdvm/ read more]]>




DVMega Dualband VHF/UHF BlueStack Assembled Digital Hot Spot APP Control MMDVM. With the assembled kit, you can simply configure your access point via Bluetooth on your mobile hone device (or connect to laptop/desktop) and use your VHF/UHF radio and you can access the world! Perfect replacement for MMDVM + Raspberry Pi. All settings are performed in the mobile app, which is very convenient. Mobile APP is English version, only supports PC and Android phones for the time being. Note: it can’t support iphone. 1 x Hot Spot Kit. We believe our items are so outstanding. All products are quality checked. We will be happy to resolve any issues you may have in a cordial and friendly manner. The item “DVMega Dualband VHF/UHF BlueStack Assembled Digital Hot Spot APP Control MMDVM” is in sale since Friday, November 29, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “saymlove” and is located in Shen Zhen. This item can be shipped worldwide.

• Brand: Unbranded
• MPN: Does not apply
• UPC: Does not apply
• EAN: Does not apply
• Herstellernummer: Does not apply
• Marke: Markenlos

]]> https://hamradiotransceiver.biz/2021/08/dvmega-dualband-vhfuhf-bluestack-assembled-digital-hot-spot-app-control-mmdvm/feed/ 0 https://hamradiotransceiver.biz/2021/07/assembled-mmdvm-hotspot-support-p25-dmr-ysf-raspberry-pi-oled-antenna-case/ https://hamradiotransceiver.biz/2021/07/assembled-mmdvm-hotspot-support-p25-dmr-ysf-raspberry-pi-oled-antenna-case/#comments Fri, 23 Jul 2021 18:12:52 +0000 http://hamradiotransceiver.biz/2021/07/assembled-mmdvm-hotspot-support-p25-dmr-ysf-raspberry-pi-oled-antenna-case/ read more]]>






Assembled MMDVM Hotspot Support P25 DMR YSF + Raspberry pi +OLED +Antenna + Case. Jumbo-SPOT-RTQ is a completely self-contained digital hotspot supporting DMR, Dstar, P25 and System Fusion communications. Fully assembled and tested in a ruggedized aluminum enclosure. Pi-Star Digital Voice Software pre-loaded and easily upgraded via software. High performance 32-bit ARM processor. Supports DMR, P-25, D-Star and System Fusion. Onboard LEDs to show status (Tx, Rx, PTT, Mode). Up to 10mW RF power. SMA antenna connector, UHF antenna included. Mounts cleanly on all current Raspberry Pis including the Pi Zero. The firmware is pre-loaded and is easily upgraded via software. Please do not upgrade the firmware by yourself. Open source 3D printable case available. Support and tested with PI-STAR. Supports PI-STAR’s web based digital voice dashboard and configuration tool. Supports all four digital amateur modes DMR, D-Star, P25 and System Fusion. Built-in WiFi: 802.11b/g/n. Built-in OLED system status display indicating Mode, Talk Group and Call Sign. Built-in LED indicators for status of Power, PTT, COS and Mode. Console port SSH 22 for root level access to the operating system. Quad Core A7 1.2GHz Processor, 512mb DDR3 RAM and 8gb TF Card. Pocket size aluminum enclosure. Test ID 460xxxx, test frequency 439.600MHZ, test mode DMR, test WIFI: TZB/13902982913. Fully assembled and tested Jumbo-Spot-RTQ. Raspberry pi zero x1. MMDVM hotspot board x1. 8G TFT card x1. We believe our items are so outstanding. All products are quality checked. We will be happy to resolve any issues you may have in a cordial and friendly manner. The item “Assembled MMDVM Hotspot Support P25 DMR YSF + Raspberry pi +OLED +Antenna + Case” is in sale since Sunday, April 22, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “saymlove” and is located in Shen Zhen. This item can be shipped worldwide.

• Country/Region of Manufacture: China
• MPN: Does not apply
• Brand: Unbranded/Generic

]]> https://hamradiotransceiver.biz/2021/07/assembled-mmdvm-hotspot-support-p25-dmr-ysf-raspberry-pi-oled-antenna-case/feed/ 0 https://hamradiotransceiver.biz/2021/07/hackrf-one-portapack-h2-3-2-inch-lcd-shell-assembled-firmware-installed/ https://hamradiotransceiver.biz/2021/07/hackrf-one-portapack-h2-3-2-inch-lcd-shell-assembled-firmware-installed/#comments Wed, 21 Jul 2021 17:51:27 +0000 http://hamradiotransceiver.biz/2021/07/hackrf-one-portapack-h2-3-2-inch-lcd-shell-assembled-firmware-installed/ read more]]>







HackRF One + PortaPack H2 3.2 inch LCD + Shell Assembled + Firmware Installed. The PortaPack makes the HackRF One software-defined radio portable. It adds an LCD touchscreen, user interface navigation controls, audio output and input, micro SD card slot, 0.5 PPM crystal oscillator, and real-time clock battery backup, Speaker, Li po battery Charger and Center key power on/off function(long press 3-4 sec). The PortaPack firmware provides a user interface and necessary signal processing to do many useful things without a computer. New ABS case, can protect the portapack and hackrf one well. 3.2 inch touch screen. With voice input and output function (ADC, DAC). With TF card slot (store data, playback data, frequency management). Built-in TCXO high-precision clock (0.5ppm), the frequency is as accurate as the walkie-talkie. The new firmware automatically switches the external TCXO (you can see the clock source is external in the menu). Built-in CR1220 battery with RTC clock function (record current time when saving baseband file). Support offline GPS simulation. New Mayhem firmware installed. 1 x HackRF One + PortaPack H2 3.2 inch LCD + Shell Assembled + Firmware Installed. 1 x USB cable. We believe our items are so outstanding. All products are quality checked. We will be happy to resolve any issues you may have in a cordial and friendly manner. The item “HackRF One + PortaPack H2 3.2 inch LCD + Shell Assembled + Firmware Installed” is in sale since Friday, November 6, 2020. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “saymlove” and is located in Shen Zhen. This item can be shipped worldwide.

• Type: Ham Radio Transceiver
• Band Type: Quad Band
• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2021/07/hackrf-one-portapack-h2-3-2-inch-lcd-shell-assembled-firmware-installed/feed/ 0 https://hamradiotransceiver.biz/2021/05/hackrf-one-upgraded-portapack-h2-3-2-lcd-plastic-shell-assembled-usb-cable/ https://hamradiotransceiver.biz/2021/05/hackrf-one-upgraded-portapack-h2-3-2-lcd-plastic-shell-assembled-usb-cable/#comments Fri, 21 May 2021 17:02:04 +0000 http://hamradiotransceiver.biz/2021/05/hackrf-one-upgraded-portapack-h2-3-2-lcd-plastic-shell-assembled-usb-cable/ read more]]>










HackRF One + Upgraded PortaPack H2 3.2 LCD + Plastic Shell Assembled + USB Cable. 1 Antenna Version Package Included. 1 x SDR Radio (Upgraded PortaPack H2+HackRF One). 1 x 40MHz-6GHz Antenna. 1 x USB Cable. 2 Antenna Version Package Included. 1 x SDR Radio (Upgraded PortaPack H2+HackRF One) -1 x 40MHz-6GHz Telescopic Antenna – 700MHz-2700MHz Antenna – 1 x USB Cable. 5 Antenna Version Package Included. 1 x 2.4/5/5.8GHz Antenna. 1 x 35DBi GSM/3G/4G Antenna. 1 x 40MHz-6GHz Telescopic Antenna. 1 x 40MHz-860GHz Antenna. 1 x 700MHz-2700MHz. Note: It is assembled and ready for use. Description: The official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party’Havoc’ firmware is really what you’ll want to use with it since it contains many more decoders and transmit options. Progress of Work: 1. It has completed the program validation prototype. The latest documents in 2017, May are based on improvements. Catching and Replay: – One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy. To create a catching. You just need to enter the “Catching” menu, set the frequency of the remote key, press the red’R’ Record button and then press the key on the remote. Then stop the recording to save it to a SD Card. Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key. Microphone TX: – Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio jack simply hold down the right button to push to talk. If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones Other Transmitters: -There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches. There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage! Receivers: By connecting speakers to the Portapack’s 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled you can receive aircraft. Hardware Configuration: – 3.2-inch TFT240320 screen – Navigation switch – Audio output – Microphone input – DC 2.1 interface – 4-layer gold plate – ROSH process (exported to Europe and America) The latest version is updated with the latest documents in 2017, May. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot, Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). HAVOC Features Include: – IQ file replay – Microphone FM transmit with CTCSS – CTCSS decoder – Frequency manager (save & load from SD card, with categories and notes) – File manager – “Soundboard” wave file player (put 8-bit mono files in SD card /wav directory) – ADS-B receiver with map view – SSTV transmitter – Fully configurable transmit signals – POCSAG transmitter – POCSAG receiver/decoder – Morse transmitter (FM tone and CW) – OOK transmitter for common remote encoders PT2262, doorbells, remote outlets, some garage doors… RDS (Radio Data System) PSN, RadioText and Time groups transmitter – Meteorological radiosonde receiver for M10 and M2K2… AFSK receiver – AFSK transmitter Bell202… Nuoptix DTMF sync transmitter – TouchTunes jukebox universal remote – LCR (Language de Commande Routier) message generator – Street lighting control transmitter (CCIR tones) – “Play Dead” in case of emergency – Fully configurable RF signal generator – RSSI audio output as pitch (for direction finding) Features: – 3.2-inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver. Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days. The item “HackRF One + Upgraded PortaPack H2 3.2 LCD + Plastic Shell Assembled +USB Cable” is in sale since Saturday, October 17, 2020. This item is in the category “Handys & Kommunikation\Funktechnik\Amateurfunk\Amateurfunk-Sendeempfänger”. The seller is “panda201898″ and is located in Shenzhen. This item can be shipped worldwide.

• Besonderheiten: LCD Bildschirm
• Marke: Markenlos
• Modell: SDR Radio
• Herstellernummer: Nicht zutreffend
• Herstellergarantie: 1 Jahr
• Produktart: SDR Radio
• Herstellungsland und -region: China

]]> https://hamradiotransceiver.biz/2021/05/hackrf-one-upgraded-portapack-h2-3-2-lcd-plastic-shell-assembled-usb-cable/feed/ 0