Ham Radio Transceiver » development

Ham Radio Transceiver » development https://hamradiotransceiver.biz Sat, 02 May 2026 02:07:09 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 70MHz-6GHz Zynq7020+AD9363 SDR Radio Development Board for Pluto SDR https://hamradiotransceiver.biz/2025/05/70mhz-6ghz-zynq7020ad9363-sdr-radio-development-board-for-pluto-sdr/ https://hamradiotransceiver.biz/2025/05/70mhz-6ghz-zynq7020ad9363-sdr-radio-development-board-for-pluto-sdr/#comments Sat, 03 May 2025 21:10:49 +0000 https://hamradiotransceiver.biz/2025/05/70mhz-6ghz-zynq7020ad9363-sdr-radio-development-board-for-pluto-sdr/ read more]]>

70MHz-6GHz Zynq7020+AD9363 SDR Radio Development Board for Pluto SDR

70MHz-6GHz Zynq7020+AD9363 SDR Software Defined Radio Development Board for Pluto SDR Improvements: – Update firmware V0.38, hacked to AD9361, supports 70MHz-6GHz, dual transmitting and receiving, and supports both USB and Ethernet ports. Improved power supply stability. Adding 9363 external input clock interface. Features: – AD9363 chip, replacing AD9361, with frequency range of 70MHz6GHz. Current laboratory tests show that there is not significant differences between these two chips. Board size: about 5 x 8cm – Peripheral: double DDR, 1GB – For N25Q128 FLASH, can be used to start. One channel SD card, can be used to start. Integrated FT2232 debugger, with serial port. PS end USB2.0. PS end gigabit Ethernet port. PL end with crystal oscillator, can drive AD9363 with pure PL. Support external input of local oscillator. Supported Software: – For IIO Oscillscope, SDR Sharp, GNU Radio, MATLAB, and other software that support for libiio. Package Included: – 1 x SDR Development Board – 1 x SD Card. 70MHz-6GHz Zynq7010+AD9363 SDR Software Defined Radio Development Board for Pluto SDR MATLAB Improvements: – Update firmware V0.38, hacked to AD9361, supports 70MHz-6GHz, dual transmitting and receiving, and supports both USB and Ethernet ports. Note: – Please contact our customer service for firmware resources after receiving the product. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
70MHz-6GHz Zynq7020+AD9363 SDR Radio Development Board for Pluto SDR

Incoming search terms:

Liber SDR 7020 Software Radio AD9363 схема
Zynq7020 AD9363 SDR

]]> https://hamradiotransceiver.biz/2025/05/70mhz-6ghz-zynq7020ad9363-sdr-radio-development-board-for-pluto-sdr/feed/ 0 HackRF One 1-6GHz SDR Development Board Transceiver Software Radio Platform US https://hamradiotransceiver.biz/2023/04/hackrf-one-1-6ghz-sdr-development-board-transceiver-software-radio-platform-us/ https://hamradiotransceiver.biz/2023/04/hackrf-one-1-6ghz-sdr-development-board-transceiver-software-radio-platform-us/#comments Fri, 21 Apr 2023 09:04:58 +0000 https://hamradiotransceiver.biz/2023/04/hackrf-one-1-6ghz-sdr-development-board-transceiver-software-radio-platform-us/ read more]]>
HackRF One 1-6GHz SDR Development Board Transceiver Software Radio Platform US

HackRF One 1-6GHz SDR Development Board Transceiver Software Radio Platform US

HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Development Board. Description: – HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing transmission of radio signals. You are responsible for using your HackRF One legally. Specifications: – 1MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware Package list: – 1 x HackRF One Software Defined Radio with Aluminium Alloy Shell – 4 x HackRF SMA Antennas (40MHz-6GHz antenna;2.4G/5/5.8G antenna;70MHz-2700MHz antenna;40MHz-860MHz antenna) – 1 x HackRF One special Shield cover(welded on the board) – 1 x HackRF TCXO PPM0.1 GPS Clock module – 1 x LG Micro USB cable. Usually it cost about 35USD-50USD. Thanks for your understanding. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “thefineshop” and is located in this country: US. This item can be shipped to United States.

Model: HackRF One
Type: Base Station
Frequency: 1MHz-6GHz
Brand: Unbranded

]]> https://hamradiotransceiver.biz/2023/04/hackrf-one-1-6ghz-sdr-development-board-transceiver-software-radio-platform-us/feed/ 0 HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Development US https://hamradiotransceiver.biz/2020/10/hackrf-one-1-6ghz-open-source-software-defined-radio-platform-sdr-development-us/ https://hamradiotransceiver.biz/2020/10/hackrf-one-1-6ghz-open-source-software-defined-radio-platform-sdr-development-us/#comments Fri, 30 Oct 2020 15:22:50 +0000 http://hamradiotransceiver.biz/2020/10/hackrf-one-1-6ghz-open-source-software-defined-radio-platform-sdr-development-us/ read more]]>

HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Development US

HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Development US. Description: – HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF One has an injection molded plastic enclosure and ships with a micro USB cable. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing transmission of radio signals. You are responsible for using your HackRF One legally. Specifications: – 1MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware Package list: – 1 x HackRF One Software Defined Radio with Aluminium Alloy Shell – 4 x HackRF SMA Antennas (40MHz-6GHz antenna;2.4G/5/5.8G antenna;70MHz-2700MHz antenna;40MHz-860MHz antenna) – 1 x HackRF One special Shield cover(welded on the board) – 1 x HackRF TCXO PPM0.1 GPS Clock module – 1 x LG Micro USB cable. Usually it cost about 35USD-50USD. Thanks for your understanding. The item “HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Development US” is in sale since Thursday, January 9, 2020. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “topskyrc” and is located in California. This item can be shipped to United States.

Model: HackRF One Software Defined Radio
MPN: Does Not Apply
Country/Region of Manufacture: China
Brand: Unbranded
Type: HackRF One Software Defined Radio

]]> https://hamradiotransceiver.biz/2020/10/hackrf-one-1-6ghz-open-source-software-defined-radio-platform-sdr-development-us/feed/ 0 HackRF One 1-6GHz Software Defined Radio Platform SDR Development Board os12 https://hamradiotransceiver.biz/2020/02/hackrf-one-1-6ghz-software-defined-radio-platform-sdr-development-board-os12/ https://hamradiotransceiver.biz/2020/02/hackrf-one-1-6ghz-software-defined-radio-platform-sdr-development-board-os12/#comments Sat, 15 Feb 2020 23:01:43 +0000 http://hamradiotransceiver.biz/2020/02/hackrf-one-1-6ghz-software-defined-radio-platform-sdr-development-board-os12/ read more]]>

HackRF One 1-6GHz Software Defined Radio Platform SDR Development Board os12

HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Development Board. Description: – HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF One has an injection molded plastic enclosure and ships with a micro USB cable. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing transmission of radio signals. You are responsible for using your HackRF One legally. Specifications: – 1MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware Package list: – 1 x HackRF One Software Defined Radio with Aluminium Alloy Shell – 4 x HackRF SMA Antennas (40MHz-6GHz antenna;2.4G/5/5.8G antenna;70MHz-2700MHz antenna;40MHz-860MHz antenna) – 1 x HackRF One special Shield cover(welded on the board) – 1 x HackRF TCXO PPM0.1 GPS Clock module – 1 x LG Micro USB cable. If you receive defective item, please kindly notify us within 14 days. The item “HackRF One 1-6GHz Software Defined Radio Platform SDR Development Board os12″ is in sale since Monday, August 26, 2019. This item is in the category “Handys & Kommunikation\Funktechnik\Amateurfunk\Amateurfunk-Sendeempfänger”. The seller is “outstandingdeal” and is located in . This item can be shipped worldwide.

Marke: Markenlos
Herstellernummer: nicht zutreffend
Herstellungsland und -region: China

]]> https://hamradiotransceiver.biz/2020/02/hackrf-one-1-6ghz-software-defined-radio-platform-sdr-development-board-os12/feed/ 0 HackRF One Open Source Software Defined Radio Platform SDR Development Board bt https://hamradiotransceiver.biz/2020/01/hackrf-one-open-source-software-defined-radio-platform-sdr-development-board-bt/ https://hamradiotransceiver.biz/2020/01/hackrf-one-open-source-software-defined-radio-platform-sdr-development-board-bt/#comments Sat, 04 Jan 2020 21:14:29 +0000 http://hamradiotransceiver.biz/2020/01/hackrf-one-open-source-software-defined-radio-platform-sdr-development-board-bt/ read more]]>

HackRF One Open Source Software Defined Radio Platform SDR Development Board bt

HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Development Board. Description: – HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF One has an injection molded plastic enclosure and ships with a micro USB cable. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing transmission of radio signals. You are responsible for using your HackRF One legally. Specifications: – 1MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware Package list: – 1 x HackRF One Software Defined Radio with Aluminium Alloy Shell – 4 x HackRF SMA Antennas (40MHz-6GHz antenna;2.4G/5/5.8G antenna;70MHz-2700MHz antenna;40MHz-860MHz antenna) – 1 x HackRF One special Shield cover(welded on the board) – 1 x HackRF TCXO PPM0.1 GPS Clock module – 1 x LG Micro USB cable. Usually it cost about 35USD-50USD. Thanks for your understanding. The item “HackRF One Open Source Software Defined Radio Platform SDR Development Board bt” is in sale since Friday, September 27, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “buyfromtzt” and is located in HK. This item can be shipped worldwide.

Model: HackRF One
Country/Region of Manufacture: China
Type: Ham Radio Transceivers
MPN: Does Not Apply
Brand: HackRF One

]]> https://hamradiotransceiver.biz/2020/01/hackrf-one-open-source-software-defined-radio-platform-sdr-development-board-bt/feed/ 0 HackRF One 1 MHz to 6 GHz SDR Platform Software Defined Radio Development Board https://hamradiotransceiver.biz/2019/12/hackrf-one-1-mhz-to-6-ghz-sdr-platform-software-defined-radio-development-board-5/ https://hamradiotransceiver.biz/2019/12/hackrf-one-1-mhz-to-6-ghz-sdr-platform-software-defined-radio-development-board-5/#comments Tue, 17 Dec 2019 11:25:26 +0000 http://hamradiotransceiver.biz/2019/12/hackrf-one-1-mhz-to-6-ghz-sdr-platform-software-defined-radio-development-board-5/ read more]]>

HackRF One 1 MHz to 6 GHz SDR Platform Software Defined Radio Development Board

HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. 1 MHz to 6 GHz operating frequency. Up to 20 million samples per second. 8-bit quadrature samples (8-bit I and 8-bit Q). Compatible with GNU Radio, SDR#, and more. Software-configurable RX and TX gain and baseband filter. Software-controlled antenna port power (50 mA at 3.3 V). SMA female antenna connector. SMA female clock input and output for synchronization. Convenient buttons for programming. Internal pin headers for expansion. Hi-Speed USB 2.0. HackRF One 1 MHz – 6 GHz SDR Platform Software Defined Radio Development Board +. +antenna + usb cable +. Customer satisfactory is most important to us. We are always willing to work things out, thank you! Buyers need to return the defective item for the replacement at his own cost. We do our best to serve each and every customer the best we can. The item “HackRF One 1 MHz to 6 GHz SDR Platform Software Defined Radio Development Board” is in sale since Monday, November 4, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “xiaof12″ and is located in , . This item can be shipped worldwide.

Model: HackRF One
MPN: Does Not Apply
Brand: Unbranded

]]> https://hamradiotransceiver.biz/2019/12/hackrf-one-1-mhz-to-6-ghz-sdr-platform-software-defined-radio-development-board-5/feed/ 0 HackRF One 1MHZ 6GHZ Open-Source Software Radio Platform SDR Development Board https://hamradiotransceiver.biz/2019/11/hackrf-one-1mhz-6ghz-open-source-software-radio-platform-sdr-development-board/ https://hamradiotransceiver.biz/2019/11/hackrf-one-1mhz-6ghz-open-source-software-radio-platform-sdr-development-board/#comments Sun, 17 Nov 2019 18:50:35 +0000 http://hamradiotransceiver.biz/2019/11/hackrf-one-1mhz-6ghz-open-source-software-radio-platform-sdr-development-board/ read more]]>

HackRF One 1MHZ 6GHZ Open-Source Software Radio Platform SDR Development Board

You may also like. HackRF One 1MHZ -6GHZ Open-Source Software Radio Platform SDR Development Board. Specification: HackRF One is a fully open source in the SDR equipment, support for WINDOWS, LINUX, Mac, android system, such as the frequency of the support is 1 MHZ – 6 GHZ. HackRF One support software: HDSDR, GNUradio, SDR#, GQRX, SDRRADIO, and so on. Please leave note for your special request e. We only dispatch items to you on Weekday. 3Repair Some items might be broken caused by improper use, we are always happy to offer any helpful repair service. Q: My package was damaged in transit, who do I contact? We take great care in packaging your order, however damage may occur occasionally while in transit. The item “HackRF One 1MHZ 6GHZ Open-Source Software Radio Platform SDR Development Board” is in sale since Wednesday, September 19, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “shuangtai-elec” and is located in Shenzhen. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia.

Non-Domestic Product: No
Modified Item: No
Country/Region of Manufacture: China
Custom Bundle: No
MPN: Does Not Apply
Brand: Unbranded

]]> https://hamradiotransceiver.biz/2019/11/hackrf-one-1mhz-6ghz-open-source-software-radio-platform-sdr-development-board/feed/ 0 HackRF One 1MHz to 6GHz Software Defined Radio Platform Development Board T9Q0 https://hamradiotransceiver.biz/2019/10/hackrf-one-1mhz-to-6ghz-software-defined-radio-platform-development-board-t9q0/ https://hamradiotransceiver.biz/2019/10/hackrf-one-1mhz-to-6ghz-software-defined-radio-platform-development-board-t9q0/#comments Mon, 21 Oct 2019 17:56:40 +0000 http://hamradiotransceiver.biz/2019/10/hackrf-one-1mhz-to-6ghz-software-defined-radio-platform-development-board-t9q0/ read more]]>

HackRF One 1MHz to 6GHz Software Defined Radio Platform Development Board T9Q0

Made of fine quality material, practical, easy to operate and use, wide application range, has a long service life. Features: HackRF One is a software defined radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. Half-duplex transceiver, up to 20 million samples per second, 8-bit quadrature samples (8-bit I and 8-bit Q), compatible with GNU Radio, SDR#, and more. Software-configurable RX and TX gain and baseband filter, software-controlled antenna port power (50 at 3.3 V). SMA female antenna connector, SMA female clock input and output for synchronization. Convenient buttons for programming, internal pin headers for expansion. Hi-Speed USB 2.0, USB-powered. The item “HackRF One 1MHz to 6GHz Software Defined Radio Platform Development Board T9Q0″ is in sale since Thursday, July 25, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “conoshine” and is located in Shen Zhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.

Brand: Unbranded/Generic
MPN: Does not Apply
ASIN: V1UYJWCNUU
Material: PCB
Type: 1-5 (optional)
Frequency band: 1MHz-6GHz
Data bandwidth: 20MHz
Sampling accuracy (ADC/DAC): 8BIT
Sampling speed (ADC/DAC): 20Mbps
Interface: USB2.0
Maximum transmitting power: 10dbm
64QAM transmitting EVM: 1.5%
Complex sampling bandwidth: 20MHz
Mixer RFFC5072: 80MHz-4200MHz
Wireless bandwidth RF transceiver MAX2837: 2.3GHz-2.7GHz
Processor LPC4330: main frequency 204MHz
Amplifier MGA-81563: 0.1-6GHz
HackRF One board size: 145 * 75mm / 5.7 * 3.0in
HackRF One board weight: 55g / 1.9ounce
Type 1: 190 * 110 * 40mm / 7.5 * 4.3 * 1.6in
Type 2: 300 * 195 * 30mm / 11.8 * 7.7 * 1.2in
Type 3: 300 * 195 * 40mm / 11.8 * 7.7 * 1.6in
Type 4: 400 * 300 * 30mm / 15.7 * 11.8 * 1.2in

]]> https://hamradiotransceiver.biz/2019/10/hackrf-one-1mhz-to-6ghz-software-defined-radio-platform-development-board-t9q0/feed/ 0 Hack 1 MHz to 6 GHz RF SDR Platform Software Defined Radio Development Board https://hamradiotransceiver.biz/2019/05/hack-1-mhz-to-6-ghz-rf-sdr-platform-software-defined-radio-development-board/ https://hamradiotransceiver.biz/2019/05/hack-1-mhz-to-6-ghz-rf-sdr-platform-software-defined-radio-development-board/#comments Mon, 13 May 2019 10:13:49 +0000 http://hamradiotransceiver.biz/2019/05/hack-1-mhz-to-6-ghz-rf-sdr-platform-software-defined-radio-development-board/ read more]]>

Hack 1 MHz to 6 GHz RF SDR Platform Software Defined Radio Development Board

This item is Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. 1 MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware – 1 MHz to 6 GHz SDR Platform Software Defined Radio Development Board. 1 x SDR Platform Software Defined Radio Development Board – 1 x Antenna. The item “Hack 1 MHz to 6 GHz RF SDR Platform Software Defined Radio Development Board” is in sale since Thursday, June 14, 2018. This item is in the category “Mobile Phones & Communication\Radio Communication Equipment\Ham/Amateur Radio\Ham Radio Transceivers”. The seller is “slickglass09-5″ and is located in London. This item can be shipped worldwide.

Type: Portable/Handheld
Brand: Unbranded/Generic
Model: Black
MPN: Does Not Apply
Bundle Listing: Yes

]]> https://hamradiotransceiver.biz/2019/05/hack-1-mhz-to-6-ghz-rf-sdr-platform-software-defined-radio-development-board/feed/ 0 2019 HackRF One 1MHZ 6GHZ open-source software radio platform SDR development https://hamradiotransceiver.biz/2019/04/2019-hackrf-one-1mhz-6ghz-open-source-software-radio-platform-sdr-development/ https://hamradiotransceiver.biz/2019/04/2019-hackrf-one-1mhz-6ghz-open-source-software-radio-platform-sdr-development/#comments Sat, 27 Apr 2019 09:22:44 +0000 http://hamradiotransceiver.biz/2019/04/2019-hackrf-one-1mhz-6ghz-open-source-software-radio-platform-sdr-development/ read more]]>

2019 HackRF One 1MHZ 6GHZ open-source software radio platform SDR development

Product Features: – This item is Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. Specification: – 1 MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware – 1 MHz to 6 GHz SDR Platform Software Defined Radio Development Board – Package List: – 1 x SDR Platform Software Defined Radio Development Board – 1 x Antenna. 1 x USB. The images shown are not the actual item and are for your reference only. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. There are NO EXCEPTIONS! OR, you may choose to have a replacement. In Appreciation of Your Feedback. The item “2019 HackRF One 1MHZ 6GHZ open-source software radio platform SDR development” is in sale since Friday, July 28, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “flyxy2015″ and is located in Shenzhen. This item can be shipped worldwide.

Brand: Unbranded/Generic
MPN: Does Not Apply

]]> https://hamradiotransceiver.biz/2019/04/2019-hackrf-one-1mhz-6ghz-open-source-software-radio-platform-sdr-development/feed/ 0