https://hamradiotransceiver.biz Wed, 19 Aug 2026 20:58:40 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2026/01/kenwood-ts-940s-at-withmic-power-cord-send-on-double-box/ https://hamradiotransceiver.biz/2026/01/kenwood-ts-940s-at-withmic-power-cord-send-on-double-box/#comments Fri, 16 Jan 2026 18:15:59 +0000 https://hamradiotransceiver.biz/2026/01/kenwood-ts-940s-at-withmic-power-cord-send-on-double-box/ read more]]>









ANOTHER TS940 BACK ALIVE! I HAVE MORE UNITS READY TO GO. And more in strong double boxes. All the units in same conditions. The best radio made by Kenwood ever. I recuperate many radios And all sell in excellent condition with happy ebayers. The Ts 940 is excellent Radio with a huge history. ALL THE DEFECT IS REPAIR. The most important is the power supply unit. NEVER BE DANGER AGAIN after this changes. Kenwood TS-940S Ham Radio Transceiver with power cord and original mic. Rebuild complete cold solder point on boards and plugs. Replace bulb by chip LED, on Smeter and aux display. SWITCHING PSU industrial grade 28,5v 20 amp & 26 amp peak. AVR reform with Ic component. Change batteries on digital A & C for same type 3,2v but 560 mA soldering in the same position to original. Dimm function work correctly LED ON ALL THE DISPLAY’S. Clean inside & outside, calibrate with MARCONI MFR 2026 Generator as per service manual ts 940.132 Dbm in all frecuencies. Power output = 110 watts. Antenna tuner installed and lube complete. Turn at the correct position the RF and IF boards transistors 2sk125. Eliminate the slam effect on Smeter when turn off. All the mod’s by Kenwood bulletin. WIDE AUDIO reform on RX and TX. All functions work perfect. I do the renew complete. I will send on double boxes with all the care. ME IF YOU NEED MORE PICTURES DETALLE. All the units look in general complete original. Except AVR board and transformer.

]]> https://hamradiotransceiver.biz/2026/01/kenwood-ts-940s-at-withmic-power-cord-send-on-double-box/feed/ 0 https://hamradiotransceiver.biz/2025/06/kenwood-ts-940s-at-withmic-power-cord-100-perfect-send-on-double-box-no-origin/ https://hamradiotransceiver.biz/2025/06/kenwood-ts-940s-at-withmic-power-cord-100-perfect-send-on-double-box-no-origin/#comments Wed, 04 Jun 2025 22:33:54 +0000 https://hamradiotransceiver.biz/2025/06/kenwood-ts-940s-at-withmic-power-cord-100-perfect-send-on-double-box-no-origin/ read more]]>










ANOTHER TS940 BACK ALIVE! See on HAMCATION ORLANDO 2023 & 2024 & 2025. The best radio made by Kenwood ever. I recuperate many radios And all sell in excellent condition with happy ebayers. The Ts 940 is excellent Radio with a huge history. A LL THE DEFECT IS REPAIR. The most important is the power supply unit. NEVER BE DANGER AGAIN after this changes. Kenwood TS-940S Ham Radio Transceiver with power cord and original mic. Rebuild complete cold solder point on boards and plugs. Replace bulb by chip LED, on Smeter and aux display. SWITCHING PSU industrial grade 28,5v 20 amp & 26 amp peak. AVR reform to hybrid concept. Change batteries on digital A & C for same type 3,2v but 560 mA soldering in the same position to original. Dimm function work correctly. Clean inside & outside, calibrate with MARCONI MFR 2026 Generator as per service manual ts 940.132 Dbm in all frecuencies. Power output = 110 watts. Antenna tuner installed and lube complete. Turn at the correct position the RF transistors 2sk125. Eliminate the slam effect on Smeter when turn off. All the mod’s by Kenwood bulletin. HIFI AUDIO reform on RX and TX. All functions work perfect. I do the renew complete. I will send on 2 ORIGINAL boxes with ORIGINAL styrfoam and too much care. ME IF YOU NEED MORE PICTURES DETALLE.

]]> https://hamradiotransceiver.biz/2025/06/kenwood-ts-940s-at-withmic-power-cord-100-perfect-send-on-double-box-no-origin/feed/ 0 https://hamradiotransceiver.biz/2018/11/3u-double-daiwa-swr-rf-power-wattmeter-rack-mount-with-handles/ https://hamradiotransceiver.biz/2018/11/3u-double-daiwa-swr-rf-power-wattmeter-rack-mount-with-handles/#comments Wed, 21 Nov 2018 04:15:39 +0000 http://hamradiotransceiver.biz/2018/11/3u-double-daiwa-swr-rf-power-wattmeter-rack-mount-with-handles/ read more]]>






3U RACK MOUNT DOUBLE DAIWA CN801 OR CN901 SWR/ WATTMETERS! RACK MOUNT 3U DOUBLE DAIWA CN801 OR CN901 SWR/ WATTMETER SETUP DISPLAYS YOUR RF OUTPUT IN GREAT STYLE! Display all that RF you paid for and the antennas you meticulously worked so hard to get tuned up with this handsome Dual Daiwa SWR & Wattmeter combo from Novexcomm. Good thing you bought the Daiwa wattmeters since they aren’t included of course! And now that you have them Novexcomm will make them look great for you! The rack panel is 3U (5.25″) high by the standard 19″ wide and comes with handles (shown) and DO check out the image of the CAD drawing to see the exact fit for the meters. If you only have one meter now but are planning on a second panel we can supply a cover plate for the second hole. Put your meters on the workbench and remove the front and back factory wrap around “shoes”. We supply the rear feet to prop up your meters to fit through the apertures. Chrome handles make it look sharp and stand out in your desk/ shack rack. Comes with a protected hold-down strap to keep them right where you can see them up front and stable. This special unit is a 2U tray and a 3U panel so don’t be surprised when it arrives. Comes with the corner brackets attaching the panel to the tray; (they are normally optional). YES we can make you a custom one with your call sign stencil cut into the panel… Look at our other auctions or at the Novexcomm web site! NOTE that this rack panel fits two of the most popular models of the Daiwa meters so if you bought 2 of the same or 2 different ones they both fit; verify you DO have the right meters first OK? This rack mounting ONLY fits the CN801 and CN901 so far as we know, not the 101 for sure, but it might work with others…. Want a different set or some other meter combo? No problem with Novexcomm! We can rack mount just about anything! WB6SLC good in QRZ and I will help you get it right. Novexcomm makes standard and custom rack mounts for any need and almost any radio. We do rack mounts and Go-Boxes your way! We can make custom rack panels or mobile console panels for most anything here at Novexcomm – We have it all and if we don’t we can custom make if for YOU! Give us a try! If you have any special needs like portable (Go-Box) or mobile operation be sure to give us a call first to discuss how we can make it work for you. Our rack panels are made from 0.125 (1/8 inch) aluminum, have a semi-gloss (satin) black baked finish and are 100% made in the USA! We have customers worldwide. We can’t afford to have a sample of every radio ever made sitting around here just for photos, so many of our images are Photoshopped… Some of them aren’t even of the right radio; in some cases we put a photo of a similar radio there just to give you an idea of what our rack panel will look like when you mount your radio into it. The item “3U DOUBLE DAIWA SWR / RF POWER / WATTMETER RACK MOUNT WITH HANDLES” is in sale since Friday, May 19, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “novexcomm” and is located in Torrance, California. This item can be shipped worldwide.

• Model: DOUBLE DAIWA SWR
• Type: Base Station
• MPN: Does Not Apply
• Brand: NovexComm
• Country of Manufacture: United States

]]> https://hamradiotransceiver.biz/2018/11/3u-double-daiwa-swr-rf-power-wattmeter-rack-mount-with-handles/feed/ 0