https://hamradiotransceiver.biz Sat, 18 Apr 2026 23:53:46 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2022/03/yaesu-ftdx-3000-yaesu-ftdx-3000-hf50-mhz-transceivers-23-part-number/ https://hamradiotransceiver.biz/2022/03/yaesu-ftdx-3000-yaesu-ftdx-3000-hf50-mhz-transceivers-23-part-number/#comments Fri, 18 Mar 2022 10:41:35 +0000 https://hamradiotransceiver.biz/2022/03/yaesu-ftdx-3000-yaesu-ftdx-3000-hf50-mhz-transceivers-23-part-number/ read more]]>






Aesu FTDX-3000 HF/50 MHz Transceivers. Yaesu FTDX-3000 HF/50 MHz Transceivers are members of the top-performing YAESU FT DX Series. FT DX 3000 receivers exhibit the phenomenal multi-signal characteristics first demonstrated in the FT DX 5000. With efficient dimensions of only 14.4 x 4.5 x 12.3 in. General Coverage Reception is from 30 kHz to 56 MHz. Various connections are available for RTTY, SSTV, PSK31, JT, and other digital modes. The RF Final Amplifier produces a clean 100 watt (some modes less) transmit signal. A high speed automatic ATU included. It has a large capacity 100 channel memory; the tuning data is automatically memorized to reduce tuning time when changing frequency. These tuners can handle up to a 3:1 mismatch. A USB input included for firmware updates. This input can also facilitate CAT, USB AUDIO IN / OUT and USB TX Control (PTT, KEY and FSK). A high contrast 4.3 inch TFT LCD full color screen provides a convenient view of the radio’s working functions. The High Speed Spectrum Scope function has a bandwidth of: 20 kHz, 50 kHz, 100 kHz, 200 kHz, 500 kHz, or 1 MHz. TX and RX markers appear during “split” operation. Their powerful narrow bandwidth crystal roofing filter enhances the receiver’s multi-signal characteristics. A 3-kHz roofing filter greatly improves SSB signal reception during close adjacent multi signal conditions. The 600 Hz roofing filters provide the best CW receiving environment when the adjacent signals may affect the desired signal reception. They include a High-Q IF Notch circuit has steep attenuation characteristics of 70dB or more. Effective removal of a strong beat signal is easily obtained. Interfering signals may be attenuated, while minimizing the impact on the desirable received signal. The Digital Notch Filer (DNF) is a feature that automatically follows the interfering heterodyne signals, even if there are more than one, and even if the beat frequency changes with time. This is effective in removing jamming signals. In the CW mode, the APF (Audio Peak Filter) function has an audio peak at the signal frequency; this improves the S/N and increases the readability of the CW signal. The APF peak frequency can be finely aligned. The modulation circuit of the FT DX 3000 utilizes the digital variation operational modulation type, which creates ideal high quality transmission audio. The parametric equalizer can alter the Low, Mid and High part of the audio separately. The SSB Speech Processor uses IF digital signal processing to increase the intelligibility of the transmitted signal during weak signal crowded conditions. The DSP increases the average power of the important speech spectrum components and reduces the TX power of the less significant components. Three antenna connectors are available on FT DX 3000 Rear Panels. Antenna connection selections memorized and recalled when changing bands. The “ANT 3″ input can be set for the “RX Only” antenna. An “RX Output” connector on FT DX 3000 Rear Panel accesses signals from the receiver’s RF amplifier. The signal can then be output to an external receiver for in-band simultaneous receiving. Please view the Yaesu information for this product by clicking on the “Documentation” tab at the bottom of the “More Detail. ” page. When you are looking for a great Amateur Radio transceiver, consider one of these fine Yaesu transceivers from DX Engineering! This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “johvaz1″ and is located in this country: US. This item can be shipped to United States.

• Brand: Yaesu
• Type: Ham Radio Transceiver
• Band Type: Dual Band
• Band: AM/FM
• Model: yaesu ftdx 3000
• Color: Black

]]> https://hamradiotransceiver.biz/2022/03/yaesu-ftdx-3000-yaesu-ftdx-3000-hf50-mhz-transceivers-23-part-number/feed/ 0 https://hamradiotransceiver.biz/2018/11/for-yaesu-radio-sound-eq-noise-gate-ftdx-1200-ftdx-3000-ftdx-5000-ft-950-ft-2000/ https://hamradiotransceiver.biz/2018/11/for-yaesu-radio-sound-eq-noise-gate-ftdx-1200-ftdx-3000-ftdx-5000-ft-950-ft-2000/#comments Tue, 06 Nov 2018 08:21:15 +0000 http://hamradiotransceiver.biz/2018/11/for-yaesu-radio-sound-eq-noise-gate-ftdx-1200-ftdx-3000-ftdx-5000-ft-950-ft-2000/ read more]]>






8 Band Voice Equalizer + Sound Compressor + Echo Processor + Noise Gate to the YAESU Radios. Video demonstration of work this EQ. New Generation of UR6QW. This unit can be used with any type of YAESU radios with 8 pin microphone connector. There is needed battery or power supply to feed this device. It can be the power supply from 8 to 15 volts current 40ma via standart socket. Just connect this Sound Processor to the 8 pin mic connector on your YAESU radio, give a supply from 8 to 15 volts and it is ready to work. Then turning the pots on its panel just get an excellent quality of your signal. To use the compressor pot in DX pile ups. Echo prosessor will make your signal special and selected. NOISE GATE eliminates background noise when you stop speaking – no more amplifier fan noise, dogs barking, kids music or traffic. Microphone low noise amplifier with input and output level pots. Echo prosessor with regulation of delay. Slanted front panel for more comfortable operation with it. Voice 8 band Equalizer with pots on 80 / 160/ 250 / 500 / 900 / 1500 / 2500 / 3200 Hz. Strong steel case – reliable protection against external noises. Good workig with HIGH OUTPUT POWER up to 2kWt. Working UP DOWN control of the radio by Mic’s knobs. Has add mic input MINI-JACK for easy use of computer typeface, HEIL microphones and etc. Size 180 mm x 100 mm x 50 mm. Weight – 0.65 kg. Length of a power cord with 8 pin connector is 30 cm. If you need EQ for other radios, please see. After the package left Ukraine you can track it on a tracking system of the Postal service of your country. The item “For YAESU radio Sound EQ Noise Gate FTDX-1200 FTDX-3000 FTDX-5000 FT-950 FT-2000″ is in sale since Friday, November 24, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “andreyfan” and is located in EUROPE. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Yaesu

]]> https://hamradiotransceiver.biz/2018/11/for-yaesu-radio-sound-eq-noise-gate-ftdx-1200-ftdx-3000-ftdx-5000-ft-950-ft-2000/feed/ 0 https://hamradiotransceiver.biz/2017/04/yaesu-ftdx-3000-hf-transceiver-100-watts-out-160-thru-6-meters/ https://hamradiotransceiver.biz/2017/04/yaesu-ftdx-3000-hf-transceiver-100-watts-out-160-thru-6-meters/#comments Thu, 20 Apr 2017 18:05:59 +0000 http://hamradiotransceiver.biz/2017/04/yaesu-ftdx-3000-hf-transceiver-100-watts-out-160-thru-6-meters/ read more]]>









YAESU FTDX-3000 HF TRANSCEIVER PLUS 6 METERS THIS RADIO COMES WITH MANUAL, JIFFY MANUAL, VOICE MEMORY UNIT (DVS-6), DC POWER CORD, REMOTE CONTROL KEYPAD (FH-2). VERY NICE CONDITION AND ALL WORKS. THANK YOU FOR VIEWING AND GOOD LUCK! The item “YAESU FTDX-3000 HF TRANSCEIVER, 100 WATTS OUT, 160 THRU 6 METERS” is in sale since Wednesday, April 19, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “sluicedog” and is located in Pennington Gap, Virginia. This item can’t be shipped, the buyer must pick up the item.

• Band Plan: 6 Meters
• Frequency Band(s): PLUS 6 METERS
• Brand: Yaesu
• Model: FTDX-3000
• Supported Modes: AM
• Country/Region of Manufacture: Japan
• Type: Base Station

]]> https://hamradiotransceiver.biz/2017/04/yaesu-ftdx-3000-hf-transceiver-100-watts-out-160-thru-6-meters/feed/ 0