https://hamradiotransceiver.biz Sat, 04 Jul 2026 06:25:49 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2025/01/xiegu-x6200-hf50-mhz-transceiver-extra-battery-charger-and-microphone/ https://hamradiotransceiver.biz/2025/01/xiegu-x6200-hf50-mhz-transceiver-extra-battery-charger-and-microphone/#comments Tue, 21 Jan 2025 06:25:53 +0000 https://hamradiotransceiver.biz/2025/01/xiegu-x6200-hf50-mhz-transceiver-extra-battery-charger-and-microphone/ read more]]>



The Xiegu X6200 is a versatile HF/50 MHz transceiver designed for ham radio enthusiasts. It offers a wide frequency range for communication and comes with an extra battery for extended usage. With Xiegu being a reputable brand in the ham radio industry, you can expect reliable performance and quality from the X6200 model. Whether you are an experienced ham radio operator or a beginner looking to explore the world of amateur radio communication, the XIEGU X6200 is a solid choice for your radio communication needs.

]]> https://hamradiotransceiver.biz/2025/01/xiegu-x6200-hf50-mhz-transceiver-extra-battery-charger-and-microphone/feed/ 0 https://hamradiotransceiver.biz/2024/10/yaesu-ft-950-hf50-mhz-ham-radio-transceiver-tested-excellent/ https://hamradiotransceiver.biz/2024/10/yaesu-ft-950-hf50-mhz-ham-radio-transceiver-tested-excellent/#comments Sat, 05 Oct 2024 05:35:59 +0000 https://hamradiotransceiver.biz/2024/10/yaesu-ft-950-hf50-mhz-ham-radio-transceiver-tested-excellent/ read more]]>





















Thank you for visiting my page! Sending and receiving has been confirmed. Regarding accessories, you will only receive the products shown in the photo. Please see photos and video if available. We will pack the product securely and deliver it safely. International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” Because declared value is insured value. Besides US and Int. Ernational government regulations prohibit such behavior. Japanese mechanical products use 100 volts. A transformer is required if it does not match your country’s voltage. Do your own research and prepare a suitable transformer. We try to describe any items to the best ability and offer you the best values and an good quality. We specialize in Japanese tradition products, so please look at our other items and enjoy feeling Japanese culture! Maybe we can find it for you.

]]> https://hamradiotransceiver.biz/2024/10/yaesu-ft-950-hf50-mhz-ham-radio-transceiver-tested-excellent/feed/ 0 https://hamradiotransceiver.biz/2024/06/yaesu-ft-950-hf50-mhz-transceiver-sn-9g240128-withoriginal-boxes-and-dust-cover/ https://hamradiotransceiver.biz/2024/06/yaesu-ft-950-hf50-mhz-transceiver-sn-9g240128-withoriginal-boxes-and-dust-cover/#comments Sun, 16 Jun 2024 08:15:58 +0000 https://hamradiotransceiver.biz/2024/06/yaesu-ft-950-hf50-mhz-transceiver-sn-9g240128-withoriginal-boxes-and-dust-cover/ > Yaesu FT-950 HF/50 MHz Transceiver. With the Original Boxes, Manual and Power Cord. Includes a new Yaesu MH-31B8 hand microphone. Includes a nice vinyl dust cover. Many excellent reports from Local and DX stations. Great time in the last … read more]]>




















>> Yaesu FT-950 HF/50 MHz Transceiver. With the Original Boxes, Manual and Power Cord. Includes a new Yaesu MH-31B8 hand microphone. Includes a nice vinyl dust cover. Many excellent reports from Local and DX stations. Great time in the last contest. Please disregard the power supply power cord shown in picture (4). As with all vintage electronic equipment further testing may be required. These items will be well padded for safe arrival. In our own boxes.

]]> https://hamradiotransceiver.biz/2024/06/yaesu-ft-950-hf50-mhz-transceiver-sn-9g240128-withoriginal-boxes-and-dust-cover/feed/ 0 https://hamradiotransceiver.biz/2024/01/u11981-used-icom-ic-756-pro-iii-hf50-mhz-base-transceiver/ https://hamradiotransceiver.biz/2024/01/u11981-used-icom-ic-756-pro-iii-hf50-mhz-base-transceiver/#comments Sat, 06 Jan 2024 16:23:38 +0000 https://hamradiotransceiver.biz/2024/01/u11981-used-icom-ic-756-pro-iii-hf50-mhz-base-transceiver/ read more]]>




U11981 Used ICOM IC-756 PRO III HF/50 MHz Base Transceiver This radio is in great shape and is very clean too. The display is working well and is readable. All buttons and dials are working as intended.

]]> https://hamradiotransceiver.biz/2024/01/u11981-used-icom-ic-756-pro-iii-hf50-mhz-base-transceiver/feed/ 0 https://hamradiotransceiver.biz/2023/07/yaesu-ft-891-output-100w-am-mode-40w-hf50-mhz-band-all-mode-transceiver/ https://hamradiotransceiver.biz/2023/07/yaesu-ft-891-output-100w-am-mode-40w-hf50-mhz-band-all-mode-transceiver/#comments Fri, 21 Jul 2023 20:34:41 +0000 https://hamradiotransceiver.biz/2023/07/yaesu-ft-891-output-100w-am-mode-40w-hf50-mhz-band-all-mode-transceiver/ read more]]>




Thank you for visiting. Please note that it will be provided in Japanese.

]]> https://hamradiotransceiver.biz/2023/07/yaesu-ft-891-output-100w-am-mode-40w-hf50-mhz-band-all-mode-transceiver/feed/ 0 https://hamradiotransceiver.biz/2023/01/yaesu-ftdx-1200-hf50-mhz-transceiver-with-extras/ https://hamradiotransceiver.biz/2023/01/yaesu-ftdx-1200-hf50-mhz-transceiver-with-extras/#comments Tue, 31 Jan 2023 16:40:46 +0000 https://hamradiotransceiver.biz/2023/01/yaesu-ftdx-1200-hf50-mhz-transceiver-with-extras/ read more]]>





YAESU MD-100 MIC. YAESU MH31 HAND MIC. 29A POWER SUPPLY. THE FT DX 1200 HF/50MHz Transceiver. Continuing the Yaesu “FT DX” Legacy of Excellence established decades ago, the FT DX 1200 is designed for the casual operator as well competitive operating situations, whether you primarily operate in Contests, chase DX or enjoy Field operating. The High Frequency Design Technology it has inherited ensures. “Best in Class Performance”. Similar to the high-end “YAESU FT DX” series, it uses 32-bit high speed floating point DSP for renowned proven performance. A built-in 4.3-in TFT wide full color High Resolution Display with loads of information provides superior operability and visibility for the FT DX 1200 user. A Spectrum Scope located just below the LCD display gives the operator all the information needed to place them at the right place on the band with the right receiver set-up to have a satisfying experience with a casual QSO chat or while digging out a rare desired weak signal contact. Optional Accessories are offered to provide very desirable additional features that make the FT DX 1200 a flexible true high performance platform for all hams – no matter what mode they chose to operate. With efficient dimensions of 14.4″ x 4.5″ x 12.3 (W x H x D) and weighing in at only 20.9 pounds, the FT DX 1200 is a solidly packed transceiver ready to give very high performance on all Amateur Radio bands from 160 to 6 meters. 100 Watts of Solid Performance. The RF Final Amplifier produces a clean 100 watt (some modes less) transmit signal. A large heat sink is combined with the die cast aluminum chassis for efficient heat dissipation. A cooling fan located beside the final amplifier and the TX Low Pass Filter ventilates the heat away from inside of the transceiver cabinet. This large axial flow fan is mechanically isolated from the chassis to reduce vibration and noise. The speed of the fan is continuously controlled by the temperature of the PA amplifier; starting at 40 degree C. High Speed Automatic Antenna Tuner included. The antenna tuner uses LC switching. It has a large capacity 100 channel memory; the tuning data is automatically memorized to reduce tuning time when changing frequency. Smooth Main Tuning Knob Feel. The Main Tuning Knob, made from marchined aluminum parts, has the solid feeling of a largre flyweheel, while being nimble and smooth in operation. Each user may set his/her favorite torque feeling of the Main Dial rotation. The FT DX 1200 can be connected to a PC with a USB cable through the use of an optional SCU-17 Interfeace Unit. This unit will support CAT, USB Audio In/Out, TX control (PTT, Key, Shift), and firmware updates. Remote Control From A Distant Location. External control (CAT) is possible using Serial Port or the optional SCU-17 USB Interface Unit. This feature means the FT DX 1200 can be remotely controlled from a distant location! Big TFT Full-Color Display For Superior Operability and Visibility. The FT DX 1200 presents a wide view angle, high contrast LCD 4.3 inch TFT impressive full color display that provides a convenient view of the radio’s working functions. Superior operability is realized with this convenient display. It permits excellent visibility from different viewpoints. Even with the many FT DX 1200 features and functions, the TFT display makes operation of the radio easy and comfortable. A Block Diagram Displays RX Signal Path. Choose Analog Type or Bar Graph Meter. Separate VFO-A, VFO-B Transmit and Receive Frequency Display. Bandwidth of the spectrum scope: 20kHz, 50kHz, 100kHz, 200kHz, 500kHz, or 1MHz. TX and RX markers appear during “spit” operation. Level Indicator The function names and the setting levels of the following functions are shown in the TFT main display when a function knob is rotated: Clarifier, Microphone Gain, Speech Processor, SHIFT, WIDTH, KEYER SPEED and CONTOUR. Cursor Keys Six keys that are used frequently in normal operation are located at the left side of the TFT display. Other functions can be operated by pressing the “SCOPE” key which changes the “Spectrum Scope screen” to “Function Key Display screen”. Even if the radio is turned off, the last operated Key Function is memorized and highlighted. Spectrum Scope The FT DX 1200 has a standard automatic sweeping high speed spectrum scope in line with dial operations. The spectrum scope function that allows for an instant view of the signals, their strengths and distribution within a band is supplied as standard. The spectrum scope sweep function has two modes available: the normal mode, where the band is swept once when the SELECT button is pressed, and the AUTO mode where the band is automatically swept at preset intervals. No receive audio is generated during sweeping, but as sweeping is done at an extremely high speed this is a brief instant of approximately 300 msec. If the operator quickly operates the main dial to make a big frequency change in AUTO mode, an automatic sweep is performed and the display is refreshed. This enables frequency tuning while checking the spectrum in real time. The moment tuning is halted the receive frequency audio is resumed; as no sweeping is performed during slow frequency changes to tune in to another station, there is no interruption to the receive audio. Operation therefore feels natural and is without stress. Additonal scope features include: 1. Six different options: 20 kHz, 50 kHz, 100 kHz, 200 kHz, 500 kHz and 1 MHz. TX and RX markers are displayed in the spectrum scope, enabling the user to confirm the relationship between the receive and transmit frequencies at a glance. This is particularly useful in the case of split operation. Full TFT screen signal spectrum can be viewed in detail by simply pressing the SCOPE key. Optional FFT-1 Unit provides the following additional features: 1. AF-FFT (Audio Frequency Fast Fourier Transform) scope. This AF-FFT function was first demonstrated in the FT DX 9000 series. With this Scope, the audio characteristics of the received signals; the effect of adjusting the RX IF filter performance; and utilizing the QRM rejection features, may be visually observed. It is also possible to observe the TX audio characteristics of your own signal while using the Monitor function. This is very effective for tuning the parametric equalizer for voice characteristics and the microphone audio. RTTY/PSK31 Encode Decode 3. Superior Triple Conversion Receiver. The FT DX 1200 high performance triple conversion receiver circuit structure enables elimination of unwanted signals through filters at each stage as well as optimized gain distribution. Top Performing Receiver RF Front End. The receiver front end is exposed to strong signals directly from the antenna. Yaesu engineers carefully selected and tested active elements like the RF amplifier, but also passive circuit components and coils, so that no spurious or unwanted signals are created. By pressing the ATT key on the front panel, the operator picks from four selectable stages of attenuation to attenuate interfering strong signals. The effect of strong out of band interfering signals on the RF amplifier is further reduced by significant attenuation through 8 band pass filters in the FT DX 1200. Effective QRM and QRN Rejection. Effective QRM rejection is achieved from the FT DX 1200 IF DSP. The 32-bit high speed floating decimal point DSP, TMS320C6727B (maximum 2800 MIPS/ 2100 MFLOPS) made by Texas Instruments, is used for the IF section of the FT DX 3000. The signal is processed with the high speed 300 MHz clock frequency. Proven IF WIDTH and IF SHIFT functions provide great QRM rejection performance IF SHIFT With the normal bandwidth, the pass band area can be moved relatively, so that harmful signals are rejected from the pass band IF WIDTH By adjusting the band width, Interfering signals can be removed from both sides of the pass band, without changing the pass band position. The IF width function can make the pass band narrower with one-touch. This function is effective in a pile-up or contest, when the undesired signals are located just above and below the target signal. CONTOUR The CONTOUR function ideally tailors the received audio signal without changing the bandwidth. The CONTOUR function varies the outline of the IF DSP filter pass band characteristics, and the in-band signal construction can be partially altered. Different from the IF SHIFT or IF WIDTH, the special CONTOUR pass band, can reduce or peak the desired signal, partially and continuously across the pass band. This feature is effective especially when the undesired signal is close to the center frequency. Digital Noise Reduction (DNR) by DSP The installed digital noise reduction circuit provides 15 separate parameters. The noise reduction constants may be set to the optimal working point by varying the 15 step parameters according to the actual noise within the HF band. The desired signal components are peaked and the random noise components are effectively cancelled. IF NOTCH This high Q circuit has steep attenuation characteristics of 70dB or more. Effective removal of a strong beat signal is obtained. The damping characteristics can be switched to wide or narrow band width, and the attenuation level may be adjusted in the Setting Mode Menu. Interfering signals may be attenuated, while minimizing the impact on the received signal. CW APF (Audio Peak Filter) In the CW mode, the APF (Audio Peak Filter) function has an audio peak at the signal frequency; this improves the S/N and increases the readability of the CW signal. The APF peak frequency can be finely aligned. Roofing filters of 3 kHz, 6 kHz and 15 kHz filters are fitted before the 40.455 MHz 1st IF. These filters reduce the later burden on the receiver mixer and improves the adjacent multi signal characteristics. Very Low Noise Floor – Terrific Signal to Noise Ratio. The S/N ratio (signal-to-noise ratio) of the local signal that is injected into the 1st IF mixer is one of the most important factors for improving the receiver properties in the ultra-multi-signal environment. In the FT DX 1200, the combination of it’s high stability and high accuracy 40 MHz TCXO (± 0.5ppm, -10 °C +60 °C), and it’s DDS create the fundamental frequency of this radio, and is locked to the PLL-IC and VCO directly. This circuit construction and method creates the highest quality local signal, with superior S/N performance. Three IPO Settings – Best Signal Reception During Changing Band Conditions. 3-step IPO settings permit the operator to select the most appropriate gain for best signal reception. This variety of selections provides superior receiver performance and the best possible communications with changing band conditions. The IPO (Intercept Point Optimization) is selected by a control switch located on the front panel. The IPO selection determines the gain of the RF amplifier. The gain setting is very effective in optimizing the receiver performance, depending on the antenna and the communication propagation conditions. The IPO, the ATT and one stage of the RF amplifier are used to optimize the signal levels that are sent to the mixer. High Quality Audio With Punch. The modulation circuit of the FT DX 1200 utilizes digital variation operational modulation, which creates ideal high quality transmission audio. Microphone Amplifier that includes Parametric Equalizer The modulation circuit of the FT DX 1200 utilizes the digital variation operational modulation type, which creates ideal high quality transmission audio. This radio has a parametric equalizer that makes possible versatile adjustment of the TX audio quality by aligning the TX band audio spectrum. The parametric equalizer can alter the Low, Mid and High part of the audio separately. This three stage parametric equalizer can generate high quality TX audio sound because it can be tuned in detail. Without sacrificing the audio dignity. IF DSP Speech Processor – DX’er and Contester Proven The SSB Speech Processor uses IF digital signal processing to increase the intelligibility of the transmitted signal during weak signal crowded conditions. The DSP increases the average power of the important speech spectrum components and reduces the TX power of the less significant components. Adjust the compression level in the Menu Mode to adapt the transmitted SSB signal to best suite your voice characteristics, the situation, propagation conditions and pile-up demands. Two antenna connectors are available on the FT DX 1200 Rear Panel. Having multiple antenna selections is an especially effective feature for DX and Contest operating. Antenna connection selections memorized and recalled when changing bands. It is possible to use Ant 1 for transmit and Ant 2 for receive. For the CW Enthusiast. CW Zero-in Display The TX CW side tone pitch frequency can be adjusted in the MENU. The setting range is 300 Hz to 1050 Hz. This tone pitch is used as the reference in transmission. This means that the point, at which the TX pitch is equal to the RX pitch, becomes the zero-in point. In addition, the FT DX 1200 has a CW tuning display feature. By using this function, as the pitch of the sound that is heard when receiving the CW signal becomes closer to the programmed pitch, the lighted mark moves closer to the center of the display. When the center mark light turns RED, the signal is at the zero-in point. CW APF (Audio Peak Filter) In the CW mode, the included APF (Audio Peak Filter) function has an audio peak at the signal frequency; this improves the S/N and increases the readability of the CW signal. APF bands can be selected from three steps according to preference, whereas peak frequencies can be fine-tuned with the APF switch located on the front panel. Other CW Features. Dial step setting (for the CW mode only). CW SPOT Feature. CW Full Break-in. CW “VOX” Delay is adjustable. CW Mode reversal (USB or LSB). CW Keying available during SSB operation. Separate KEY Jacks on the front and rear panels. Electronic Keyer Included. Four-channel Message Memory (50 characters each); five memories available with FH-2 Keypad (optional). Automatic “Beacon” keyer mode. Optional Fully-Automatic µ-Tuning Kit. The u-Tuning Kit that was developed for the FT DX 9000, is optionally available for use with the FT DX 1200. A large diameter with an adjustable ferrite magnetic material (Ni-Zn ferrite) core, is combined, with a high resolution and high torque stepping motor to automatically find the resonance point. By inserting these tuning units prior to the RF front end of the receiver, the IP3 points are improved by around 4 dB. Three individual tuning units are available covering frequencies from 1.8 MHz through 14 MHz. Many FT 950, FT 2000/D, FT DX 3000, FT DX 5000 and FT DX 9000 Yaesu customers have used them and found them especially effective for use on the Lower Bands. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “sbimedllc” and is located in this country: US. This item can be shipped to United States.

• UPC: 0712265195505
• Brand: Yaesu
• Frequency Range: 30 kHz to 56 MHz
• Type: Base Station
• Color: Black
• Model: FT-DX1200
• MPN: FTDX1200
• Band: AM/FM
• Compatible Product: Ham Radio Transceiver
• Item Weight: 20.9 pounds

]]> https://hamradiotransceiver.biz/2023/01/yaesu-ftdx-1200-hf50-mhz-transceiver-with-extras/feed/ 0 https://hamradiotransceiver.biz/2022/03/yaesu-ftdx-3000-yaesu-ftdx-3000-hf50-mhz-transceivers-23-part-number/ https://hamradiotransceiver.biz/2022/03/yaesu-ftdx-3000-yaesu-ftdx-3000-hf50-mhz-transceivers-23-part-number/#comments Fri, 18 Mar 2022 10:41:35 +0000 https://hamradiotransceiver.biz/2022/03/yaesu-ftdx-3000-yaesu-ftdx-3000-hf50-mhz-transceivers-23-part-number/ read more]]>






Aesu FTDX-3000 HF/50 MHz Transceivers. Yaesu FTDX-3000 HF/50 MHz Transceivers are members of the top-performing YAESU FT DX Series. FT DX 3000 receivers exhibit the phenomenal multi-signal characteristics first demonstrated in the FT DX 5000. With efficient dimensions of only 14.4 x 4.5 x 12.3 in. General Coverage Reception is from 30 kHz to 56 MHz. Various connections are available for RTTY, SSTV, PSK31, JT, and other digital modes. The RF Final Amplifier produces a clean 100 watt (some modes less) transmit signal. A high speed automatic ATU included. It has a large capacity 100 channel memory; the tuning data is automatically memorized to reduce tuning time when changing frequency. These tuners can handle up to a 3:1 mismatch. A USB input included for firmware updates. This input can also facilitate CAT, USB AUDIO IN / OUT and USB TX Control (PTT, KEY and FSK). A high contrast 4.3 inch TFT LCD full color screen provides a convenient view of the radio’s working functions. The High Speed Spectrum Scope function has a bandwidth of: 20 kHz, 50 kHz, 100 kHz, 200 kHz, 500 kHz, or 1 MHz. TX and RX markers appear during “split” operation. Their powerful narrow bandwidth crystal roofing filter enhances the receiver’s multi-signal characteristics. A 3-kHz roofing filter greatly improves SSB signal reception during close adjacent multi signal conditions. The 600 Hz roofing filters provide the best CW receiving environment when the adjacent signals may affect the desired signal reception. They include a High-Q IF Notch circuit has steep attenuation characteristics of 70dB or more. Effective removal of a strong beat signal is easily obtained. Interfering signals may be attenuated, while minimizing the impact on the desirable received signal. The Digital Notch Filer (DNF) is a feature that automatically follows the interfering heterodyne signals, even if there are more than one, and even if the beat frequency changes with time. This is effective in removing jamming signals. In the CW mode, the APF (Audio Peak Filter) function has an audio peak at the signal frequency; this improves the S/N and increases the readability of the CW signal. The APF peak frequency can be finely aligned. The modulation circuit of the FT DX 3000 utilizes the digital variation operational modulation type, which creates ideal high quality transmission audio. The parametric equalizer can alter the Low, Mid and High part of the audio separately. The SSB Speech Processor uses IF digital signal processing to increase the intelligibility of the transmitted signal during weak signal crowded conditions. The DSP increases the average power of the important speech spectrum components and reduces the TX power of the less significant components. Three antenna connectors are available on FT DX 3000 Rear Panels. Antenna connection selections memorized and recalled when changing bands. The “ANT 3″ input can be set for the “RX Only” antenna. An “RX Output” connector on FT DX 3000 Rear Panel accesses signals from the receiver’s RF amplifier. The signal can then be output to an external receiver for in-band simultaneous receiving. Please view the Yaesu information for this product by clicking on the “Documentation” tab at the bottom of the “More Detail. ” page. When you are looking for a great Amateur Radio transceiver, consider one of these fine Yaesu transceivers from DX Engineering! This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “johvaz1″ and is located in this country: US. This item can be shipped to United States.

• Brand: Yaesu
• Type: Ham Radio Transceiver
• Band Type: Dual Band
• Band: AM/FM
• Model: yaesu ftdx 3000
• Color: Black

]]> https://hamradiotransceiver.biz/2022/03/yaesu-ftdx-3000-yaesu-ftdx-3000-hf50-mhz-transceivers-23-part-number/feed/ 0 https://hamradiotransceiver.biz/2021/08/yaesu-ftdx-5000mp-limited-hf50-mhz-transceivers-ftdx-5000mpl/ https://hamradiotransceiver.biz/2021/08/yaesu-ftdx-5000mp-limited-hf50-mhz-transceivers-ftdx-5000mpl/#comments Sun, 22 Aug 2021 10:41:46 +0000 http://hamradiotransceiver.biz/2021/08/yaesu-ftdx-5000mp-limited-hf50-mhz-transceivers-ftdx-5000mpl/ read more]]>





Brand:YaesuManufacturer’s Part Number:FTDX-5000MPLPart Type:Base TransceiversProduct Line:Yaesu FTDX-5000MP Limited HF/50 MHz TransceiversDXE Part Number:YSU-FTDX-5000MPLUPC:788026153985FCC License Required to Transmit:YesInternal HF Antenna Tuner:YesReceive Range 1:0.030-60.000 MHzReceive System:Dual receiverDual Watch:YesRoofing Filter Capability:YesRoofing Filter Bandwidth:15/6/3kHzThird Order Intercept (IP3):Over 40 dBmTransceiver Power Supply:InternalTransceiver Input Voltage:100264 VacTransceiver Maximum Current:8.0 AAntenna Ports:5Dedicated Receive Antenna Input:YesComputer Connection Type:RS-232Digital Mode Audio Input/Output:5-pin mini-DINExternal Display Capability:YesVoice Synthesizer Capability:NoHand Microphone Included:YesRadio Width:18.200 in. Radio Height:5.300 in. Radio Depth:15.300 in. Weight:46.300 lbs. Band Agility:Multi-bandSSB/CW Maximum Power:200 WSSB/CW Minimum Power:10 WAM Maximum Power:50 WAM Minimum Power:5 WAdditional InformationBand CoverageTransmit Frequency Range160 meters1.800-2.000 MHz80 meters3.500-4.000 MHz60 meters5.330-5.405 MHz40 meters7.000-7.300 MHz30 meters10.100-10.150 MHz20 meters14.000-14.350 MHz17 meters18.068-18.168 MHz15 meters21.000-21.450 MHz12 meters24.890-24.990 MHz10 meters28.000-29.700 MHz6 meters50.000-54.000 MHzYaesu FT DX 5000MP Limited HF/50 MHz 200 Watt Transceivers are a Premium Class of Yaesu radios with two completely independent receivers. They include unique options and accessories that are designed to meet the performance requirements of even the most demanding and serious Amateur Radio operator. This transceiver, model FT DX 5000MPL includes: Rugged 200 Watt or Class-A 75 Watt output 160 through 6 meters 300 Hz, 600 Hz, 3 kHz, 6 kHz and 15 kHz Crystal Roofing Filters – Included High Stability Oscillator, +/- 0.05ppm OCXO – Included FH-2 Remote Control Keypad – Included MH-31B8 Hand Mic Included Internal Power Supply – IncludedOptions for the Yaesu FTdx-5000MP Limited:The SM-5000 Station Monitor is available as an Optional Accessory featuring top-mount stereo speakers and a TFT spectrum scope display. This item is NOT included with the FTdx-5000MP Limited model. Alternatively, the optional SP-2000 External Speaker delivers high-quality sound and features high and low audio filters, switched dual inputs and line out and headphone connectors. FTDX 5000MP Limited transceivers employ a robust and high-power final amplifier stage that incorporates two super-reliable VRF-150 FETs in a push-pull configuration. They offer a solid 200 W output (75 W in Class A operation), with these great features: TWO Totally Independent Receivers SUPERB 112 dB Dynamic Range and +40 dBm 3rd-Order Intercept (VFO-A/Main Receiver at 14 MHz, 500 Hz filter, 600 Hz roofing filter, 10 kHz spacing, IPO1 set) Super sharp “Roofing” filters for VFO-A/Main Receiver; selectable between 300 Hz, 600 Hz, 3 kHz (6-pole crystal filter), 6 kHz, 15 kHz (4-pole MCF) 300 Hz filter was optional for FTDX 5000 and FTDX 5000D (both discontinued). It is included in the FTDX 5000MP Limited High Performance Yaesu Custom-designed 32-bit Floating Point DSP: The legendary high performance Yaesu Custom-designed 32-bit Floating Point DSP based on the TI TMS320C6727B (operating at 300 MHz clock frequency), one EACH for VFO-A and VFO-B Variable CW Audio Peak Filter, and High/Low-Cut filtering created through the very latest in DSP technology CW Width: 50/100/150/200/250/300/350/400/450/500 Hz CW Pitch Frequency: 300 to 1050 Hz (10 Hz Steps) True Analog Meter Precision: Enjoy the same extra-large metering system as the FT DX 9000 series with true analog precision and instant reaction time Enjoy new function displays for ease of operation: Three Electro-Luminescence displays are included for easier operation and control of the Sub-Frequency, Graphical Wave and Menu functions IF Output Available: IF Output (9 MHz) from VFO-A/Main Receiver Practical Level Indication System for most important settings: FTDX 5000MP Limited transceivers provide loads of practical level indications that clearly show settings of Mic-Gain/RF Power/CW-Pitch/Keyer Speed/Processor Level/VOX Delay Time and Break-In Delay TimeThe Yaesu SM-5000 Station Monitor Band-Scope an exciting and affordable matching option for the FTDX 5000 MP Limited Transceiver. If you want a versatile band-scope to enhance your operations, you are going to love the all-new SM-5000 station monitor. Built around this exclusive band scope is a complete, enhanced dual speaker system for split or diversity-receive listening with superb audio quality – the speakers are pointed at you instead of up into the air above the radio! Please view the Yaesu literature for additional information on this premium transceiver by clicking on the “Documentation” tab at the bottom of the “More Detail” page. When you are looking for a great Amateur Radio transceiver, consider one of these fine Yaesu FT DX 5000MP Limited transceivers from DX Engineering! The item “Yaesu FTDX-5000MP Limited HF/50 MHz Transceivers FTDX-5000MPL” is in sale since Friday, August 20, 2021. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “jacarb77″ and is located in West Sayville, New York. This item can be shipped to United States.

• Compatible Brand: NA
• Frequency Range: NA
• Supported Modes: NA
• Frequency Band Plan: NA
• Bundle Description: NA
• Color: NA
• Compatible Model: NA
• Band: NA
• MPN: NA
• Compatible Product: NA
• Brand: Yaesu
• Type: NA
• Number of Channels: NA
• Band Type: NA
• Manufacturer Warranty: NA
• Model: NA
• Country/Region of Manufacture: NA
• Power: NA
• Item Weight: NA

]]> https://hamradiotransceiver.biz/2021/08/yaesu-ftdx-5000mp-limited-hf50-mhz-transceivers-ftdx-5000mpl/feed/ 0 https://hamradiotransceiver.biz/2020/06/yaesu-ft-dx101d-100w-hf50-mhz-hybrid-sdr-transceiver-with-touchscreen-display/ https://hamradiotransceiver.biz/2020/06/yaesu-ft-dx101d-100w-hf50-mhz-hybrid-sdr-transceiver-with-touchscreen-display/#comments Sun, 14 Jun 2020 23:05:25 +0000 http://hamradiotransceiver.biz/2020/06/yaesu-ft-dx101d-100w-hf50-mhz-hybrid-sdr-transceiver-with-touchscreen-display/ read more]]>





Yaesu FT-DX101D 100W HF/50 MHz Hybrid SDR Transceiver with Touchscreen Display. YAESU is excited to introduce a new High-Class HF/50MHz 100W Transceiver FT-DX101D! The new FTDX101D is utilizing the latest SDR Technology and classified as our High-End HF line, the FT-DX series, which amateurs have come to know represents quality. A few of the remarkable features of the new FTDX101D are. YAESU High-Class HF/ 50MHz 100W Transceiver. SDR Technology and Waterfall Display. Large Touch Panel precision color display. Active Band Monitor enables rapid band changes with LED illumination of the operating band. Independent control of the Main and Sub Bands allows effortless operation for the serious contester needing to move quickly between the amateur bands. High-Q VC Tuning Front-End. Main tuning dial for Main and Sub Band frequency control includes an Outer Dial for clarifier, VC tuning, fine tuning or custom settings. With all its strength, YAESU produced this new HF transceiver to carry on the tradition of high quality known from the original 101 series. The new FTDX101D will be certain to satisfy the variety of many amateur radio enthusiasts demands. GigaParts ships from multiple locations across the USA, so a portion of your order may come from two different warehouses. Modified radios do not qualify for direct replacement unless GigaParts performed the modification. Is a full service computer and amateur radio store. Our PC department stocks the latest components for upgrading your PC, building your own PC, or having us build one for you. Our Radio department features the latest products from manufacturers such as Alinco, Icom, Kenwood®, Yaesu, MFJ, Diamond, and many more. Whether you’re a DX’er looking for the latest HF rig or a soon-to-be-HAM looking for study materials and a two-meter handie talkie, we have what you need! We look forward to adding you to our long list of satisfied customers. You may also be interested in.. View more great items. The item “Yaesu FT-DX101D 100W HF/50 MHz Hybrid SDR Transceiver with Touchscreen Display” is in sale since Thursday, April 25, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “gigaparts” and is located in United States. This item can be shipped to United States.

• MPN: FT-DX101D
• Brand: Yaesu
• Band: HF
• Type: Base Station
• Supported Modes: AM

]]> https://hamradiotransceiver.biz/2020/06/yaesu-ft-dx101d-100w-hf50-mhz-hybrid-sdr-transceiver-with-touchscreen-display/feed/ 0 https://hamradiotransceiver.biz/2020/05/kenwood-ts-570sg-hf50-mhz-100-watt-all-mode-transceiver/ https://hamradiotransceiver.biz/2020/05/kenwood-ts-570sg-hf50-mhz-100-watt-all-mode-transceiver/#comments Fri, 29 May 2020 15:47:35 +0000 http://hamradiotransceiver.biz/2020/05/kenwood-ts-570sg-hf50-mhz-100-watt-all-mode-transceiver/ read more]]>











Kenwood TS-570SG HF and 6 Meter All Mode 100 Watt Transceiver. Full power output on all bands and excellent receive. Includes original hand microphone and power cable. Manual is available as a download. K enwood has brought the best of HF DSP technology out of the clouds and into the hands of everyone with the new TS-570S(G) (HF+6m). The G series represents the latest advancements in HF radio design from KENWOOD, and is even available as an upgrade to pre-existing TS-570 units. Features at a glance. 16-bit AF-stage DSP delivers superb audio quality on both transmit and receive. Adjustable transmit sound quality and NR1 Noise Reduction System. Digital filtering with 3 new CW DSP filters give you the edge when conditions are tough. Compact enough for mobiling, yet large enough to build a station around. TS-570S(G) in detail. Affordable DSP without compromise! High-end radio technology doesn’t mean a high-end budget anymore — KENWOOD delivers it today with the TS-570S(G) (HF+6m). With 16-bit DSP technology, untouchable digital filtering, heavy-duty transmitter design, a Central Frequency Control System for near-perfect stability, and a large LCD display section coupled with an ergonomically-optimized human interface, the TS-570S(G) provides a clean and powerful operating experience. All of this wrapped up in a compact and efficient package makes the TS-570S(G) the perfect choice for home or mobiling in your car, RV or boat. Interference reduction AF-stage digital signal processing provides extensive control over received signals by identifying and filtering interference using digital algorithms. This results in interference reduction capabilities simply not attainable with analog designs. In addition, the new NR1 system is operator-adjustable in 9-step increments, or it can be assigned to track input signal strength automatically. Both the NR1 and NR2 settings now track when changing mode groups eg. The new Dual Selectable Beat Cancel (BC) function also works against intermittent beat interference (except in CW mode). In CW and FSK, the DSP acts as a VBT (Variable Band Tuning) that alters passband width, for rejection of nearby signals. The super-narrow CW filter (50 Hz) enables effective filtering even during very crowded conditions, with its centre frequency tied to the pitch frequency so they track together. The G model also incorporates 3 new CW DSP filters: 80 Hz, 150 Hz, 500 Hz, for a total of 11 user-selectable filters. You can now also use the “One-touch” DSP filter wide mode to instantly check band conditions when operating in narrow mode. When used in conjunction with the equalizer, the CW filter reduces ringing to almost undetectable levels. There are also 3 optional filters that can be easily installed (one at a time) to acquire various IF filter bandwidth selections (see optional accessories). The Line Enhancer Method automatically forms a filter shape around the target signal for a custom, dynamic noise reduction capability. In conditions where weak CW signals are buried deep in the noise, the SPAC Method has the ability to pull them out with either the 20 milli-second or 7.5 milli-second correlation time settings. TX audio shaping You have 3 ways of tailoring your transmit audio with DSP: Voice Equalizer, Transmit Equalizer and Speech Processor functions, plus you can use the new 9-step TX sound quality monitor volume for precision control. By combining the Speech Processor gain settings with the Transmit Equalizer, you are able to shape your voice for virtually any application, plus it is now available for RX as well, complete with its own independent settings. CW auto tune — a world first Now you no longer have to adjust the VFO while operating on CW — the CW Auto Tune function does it for you automatically by adjusting the VFO to your preset pitch at the touch of a button. In the new G models the CW auto tune mode links only with the RIT frequency without changing the transmit frequency so incoming traffic can be tracked even if it is slightly off frequency. Operator-engineered features The TS-570D/S(G) represents the latest advancements in the human-machine interface as applied to radio transceiver design. KENWOOD engineers have achieved a fine balance between size, features, display, controls and performance to deliver a transceiver that will give you outstanding results regardless of your operating style or location. New menu and user features There are 46 types of menu features to assist both the novice and expert operator. And of course, KENWOOD’s Fine mode allows 1 Hz steps on the VFO dial for precise manual tuning. Extensive memory functions You have a bank of 100 memories available, with 90 assignable for standard memories and 10 for programmable VFO, programmable scan and long-term memory functions. The scroll function lets you browse memory contents, memory channel copy sends the contents of one channel to another, lock-out memory changes the scan map to exclude certain channels, and memory shift alters the frequency stored in a channel. Scanning The TS-570S(G) has a wealth of scanning capabilities including variable speed with time-based or carrier-based resume modes, channel scan, group channel scan, all except locked out channels, or it can be programmed to scan a frequency range between two channels. The scan-hold function stops the scanning for 5 seconds. Large LCD The amber-colored backlight LCD frequency display is large, with a 4-stage dimmer, and is laid out in a clear and informative manner. The 7-digit alphanumeric sub-display provides menu mode guidance, split frequency display and digital filter selection options. The accompanying analog meter provides S-readings, PWR, COMP, SWR and ALC information. Optimal sizing The 270 x 96 mm (10-5/8 x 3-3/4 inch) panel size make the TS-570S(G) suitable for any mobile operation, yet its large display and sophisticated user features make it a perfect candidate to build a first-class base station with. This versatility means that you only need one radio for all your home and field operations. High-performance transmitter section The heavy-duty transmitter makes the TS-570S(G) ideal for contesting, mobiling and FSK applications, delivering between 5 and 100 watts in 5 watt increments. The large heatsink and high-capacity cooling fan system designed specifically for this model enables continuous operation under a wide range of environmental conditions. High frequency stability is achieved with a one-point frequency control system that uses a single crystal to control all internal oscillating frequencies (except in FM mode). Stability can even be raised to a pro-grade +/- 0.5 PPM (within 7 Hz on the 14 MHz band) with the optional SO-2 TCXO. Hot receiver section The wide-band receiver covers from 500 kHz through 30 MHz continuously with high selectivity and sensitivity. The two built-in pre-amps (one each for high band and low band) allow you to select better sensitivity or higher IMD performance, and the dedicated 7 MHz and 14 MHz bandpass filters deliver improved SW intermodulation rejection. During split-frequency operations you can receive your transmit frequency with a touch of the TF-Set button. The transmit frequency can be changed, even if the receive frequency is locked, as long as the button is held. Other receiver section features include IF Shift, Noise Blanker to eliminate pulse type noise, AGC, All-Mode Squelch and RF Gain. CW features In addition to the CW Auto Tune function, the TS-570S(G) has a host of CW features often found only on larger-class models. The full/semi break-in switching and delay time settings are fully adjustable. In semi break-in the delay time between key release and active receive mode can be set for between 50 milli-seconds and 1000 milli-seconds. When using VOX operation the delay time can be set for between 150 milli-seconds and 3000 milli-seconds. Other features include CW side tone monitor and volume setting, CW reverse mode and a 3 channel CW message memory. Built-in keyer The full-featured electronic keyer provides solid and reliable keying at any speed with dual key inputs on the back — one for a paddle and one for a key. You can choose between the new Manual Weight feature where the relative length of dots and dashes can be altered in 16 steps between 1:2.5 and 1:4.0, or two types of Auto-Weight — one that adjusts to the keying speed automatically and one that works on a fixed weight percentage. The Weight Reverse function lessens the weight as the keying speed increases, allowing for easier switching between keying hands. And during CW message playback, the paddle input can be prioritized with the Insert Keying Settings function. Packet & FSK The packet filter bandwidth and AF input/output levels are fully selectable. You can adjust the ACC2 (PKD) input/output and ANO output levels. FSK features include selectable shift frequencies between 170, 200, 425 and 850 Hz. The KEY polarity and Hi/Low tones are switchable to match your RTTY device (TU, MCP). The FSK reverse function lets you match transmission methods to the other party if necessary, for example changing the BFO frequency from LSB (normal) to USB (reverse). FM features (built-in) The TS-570S(G) has built-in CTCSS functionality with 38 sub-tones settings plus a 1750 Hz tone and switchable Narrow/Wide deviation modes. The sub-tone can be set for burst or continuous, depending on the input requirements of the target repeater system, and can be assigned to any of the first 90 memory channels. FM is not necessarily included in all models. Automatic antenna tuner The built-in Automatic Antenna Tuner is preset for immediate matching at 18 points between the 1.8 and 28 MHz Amateur bands. And dual antenna connectors on the TS-570S(G) are an added convenience. The TS-570S(G) has one connector each for HF and 6m. VS-3 The VS-3 option provides a synthesized voice output to aid visually-impaired operators or as an added measure of convenience and safety for mobile operators. PC control option You can integrate your TS-570 Series with a PC via a 9-pin D-SUB and RS-232C interface. The RCP-2 Radio Control Programme also allows the HF operator to set-up and programme multiple radios, and save the configuration data to disk. DRU-3A The DRU-3A Digital Recording Unit is an available option that enhances contesting or general operation. Data transfer Memory settings can be transferred between radios using the copy mode. Linear amplifier control An external Linear Amplifier can be controlled via the menu and the remote jack control relay. The item “KENWOOD TS-570SG HF/50 MHz 100 WATT ALL MODE TRANSCEIVER” is in sale since Sunday, May 24, 2020. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “zrcatman” and is located in Colgate, Wisconsin. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Taiwan, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Qatar, Croatia, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Pakistan, Paraguay, Uruguay.

]]> https://hamradiotransceiver.biz/2020/05/kenwood-ts-570sg-hf50-mhz-100-watt-all-mode-transceiver/feed/ 0