https://hamradiotransceiver.biz Sun, 06 Sep 2026 21:54:43 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2022/11/anytone-at-d878uvii-plus-dmr-dualband-radio-latest-version-brand-new/ https://hamradiotransceiver.biz/2022/11/anytone-at-d878uvii-plus-dmr-dualband-radio-latest-version-brand-new/#comments Wed, 23 Nov 2022 14:05:51 +0000 https://hamradiotransceiver.biz/2022/11/anytone-at-d878uvii-plus-dmr-dualband-radio-latest-version-brand-new/ read more]]>








Hello and thanks for your interest in this ANYTONE AT-D878UVII PLUS DMR DUALBAND RADIO LATEST VERSION. Brand new in factory package. This listing is for 1(one) piece. We have plenty of this model in stock. Make me an offer if you like more. We are authorized Anytone brand reseller and this item is from fresh stock – newly manufactured with latest functions added in both hardware and firmware! Package comes with the following accessories. AT-D878UVII plus VHF/UHF radio. Charging cable for PTT switch. Bigger sized Li-Ion battery 3100mAh. High Gain High efficiency dual band rubber Antenna. This item is in the category “Consumer Electronics\Radio Communication\Walkie Talkies, Two-Way Radios”. The seller is “lz2jr” and is located in this country: BG. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Features: Automatic Noise Limiter (ANL), Channel Monitor, CTCSS, DCS, GPS, Repeater, APRS
• MPN: AT-D878UV
• Memory: 2GB
• Band: Dualband VHF/UHF
• Number of Channels: 4000
• Country/Region of Manufacture: China
• Year Manufactured: 2022 (week 26)
• Model: AT-D878UVII plus
• Service: DMR tier I and II; Analog
• Communications Protocol: DMR Tier I and II; Analog
• Item Weight: 0.8kg
• Power: 6W
• Brand: ANYTONE
• Color: Black
• Wireless Range: 5 – 40km
• Type: portable/handheld

]]> https://hamradiotransceiver.biz/2022/11/anytone-at-d878uvii-plus-dmr-dualband-radio-latest-version-brand-new/feed/ 0 https://hamradiotransceiver.biz/2021/04/2019-latest-portapack-metal-case-0-5ppm-txco-for-hackrf-one-sdr-radio/ https://hamradiotransceiver.biz/2021/04/2019-latest-portapack-metal-case-0-5ppm-txco-for-hackrf-one-sdr-radio/#comments Fri, 23 Apr 2021 01:58:57 +0000 http://hamradiotransceiver.biz/2021/04/2019-latest-portapack-metal-case-0-5ppm-txco-for-hackrf-one-sdr-radio/ read more]]>








2019 Latest PORTAPACK + Metal Case + 0.5ppm TXCO For HACKRF ONE SDR Radio. PortaPack does not include the HackRF One. Only Portapack and meta case. TFT240320 screen (model: ER-TFT024-3). 6.4 layer gold plate. ROSH process (exported to Europe and America). The latest version is updated with the latest documents in 2017.5 month. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). 2.4 inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Micro SD card slot for data and code storage. Some features demonstrated in 2016 February 22 firmware video. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Some assembly is required. PortaPack does not include a HackRF One. Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receive. International buyers please note. These charges are buyers responsibility. If the item is not as described or damaged in transportation, please send it back within 7 days upon date of receipt. Items must be unused, in original packaging and include all parts, accessories and packaging. The item “2019 Latest PORTAPACK + Metal Case + 0.5ppm TXCO For HACKRF ONE SDR Radio” is in sale since Wednesday, July 3, 2019. This item is in the category “Mobile Phones & Communication\Radio Communication Equipment\Ham/Amateur Radio\Ham Radio Transceivers”. The seller is “mylove2014alice” and is located in . This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2021/04/2019-latest-portapack-metal-case-0-5ppm-txco-for-hackrf-one-sdr-radio/feed/ 0 https://hamradiotransceiver.biz/2020/10/latest-portapack-hackrf-one-sdr-txco-metal-case-havoc-for-gps-simulator/ https://hamradiotransceiver.biz/2020/10/latest-portapack-hackrf-one-sdr-txco-metal-case-havoc-for-gps-simulator/#comments Wed, 07 Oct 2020 18:51:14 +0000 http://hamradiotransceiver.biz/2020/10/latest-portapack-hackrf-one-sdr-txco-metal-case-havoc-for-gps-simulator/ read more]]>







Package including hackrf one with portapack and a metal case and a antenna , the havoc firmware is installed. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). Microphone FM transmit with CTCSS. Frequency manager (save & load from SD card, with categories and notes). “Soundboard” wave file player (put 8-bit mono files in SD card /wav directory). ADS-B receiver with map view. Fully configurable transmit signals. Morse transmitter (FM tone and CW). OOK transmitter for common remote encoders PT2262, doorbells, remote outlets, some garage doors… RDS (Radio Data System) PSN, RadioText and Time groups transmitter. Meteorological radiosonde receiver for M10 and M2K2… Nuoptix DTMF sync transmitter. TouchTunes jukebox universal remote. LCR (Language de Commande Routier) message generator. Street lighting control transmitter (CCIR tones). “Play Dead” in case of emergency. Fully configurable RF signal generator. RSSI audio output as pitch (for direction finding). 2.4 inch, 240 x 320 RGB LCD with touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Micro SD card slot for data and code storage. Some features demonstrated in 2016 February 22 firmware video. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receive. The item “Latest PortaPack +HackRF One SDR + TXCO +Metal Case +Havoc for GPS simulator” is in sale since Friday, May 8, 2020. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “fcsdeal” and is located in . This item can be shipped worldwide.

• Country/Region of Manufacture: China
• MPN: Does Not Apply
• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2020/10/latest-portapack-hackrf-one-sdr-txco-metal-case-havoc-for-gps-simulator/feed/ 0 https://hamradiotransceiver.biz/2020/08/2020-latest-portapack-hackrf-one-sdr-metal-case-tcxo-havoc-firmware/ https://hamradiotransceiver.biz/2020/08/2020-latest-portapack-hackrf-one-sdr-metal-case-tcxo-havoc-firmware/#comments Sun, 30 Aug 2020 13:05:36 +0000 http://hamradiotransceiver.biz/2020/08/2020-latest-portapack-hackrf-one-sdr-metal-case-tcxo-havoc-firmware/ read more]]>













2019 Latest PORTAPACK + HackRF One SDR Software Defined Radio + Metal Case +TXCO. The official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party’Havoc’ firmware is really what you’ll want to use with it since it contains many more decoders and transmit options. You can fully unleash the power of the Portapack as this comes with Havoc Firmware Installed! The case headset hole is for iphone headset or same size headset. According to source code: github. Com/sharebrained/portapack-hackrf. Redesign this hardware and share it to the enthusiast. Has completed the program validation prototype. The latest 2017.5 month documents are based on improvements. One of the best things about the PortaPack is that it makes capture and replay of wireless signals like those from ISM band remote controls extremely easy. To create a capture you just need to enter the “Capture” menu, set the frequency of the remote key, press the red’R’ Record button and then press the key on the remote. Then stop the recording to save it to the SD Card. Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key. Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio jack simply hold down the right button to push to talk. If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones. There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple keyfobs, or things like home automatation switches. There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage! By connecting speakers to the Portapack’s 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled youcan receive aircraft. TFT240320 screen (model: ER-TFT024-3). 6.4 layer gold plate. ROSH process (exported to Europe and America). The latest version is updated with the latest documents in 2017.5 month. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). Microphone FM transmit with CTCSS. Frequency manager (save & load from SD card, with categories and notes). “Soundboard” wave file player (put 8-bit mono files in SD card /wav directory). ADS-B receiver with map view. Fully configurable transmit signals. Morse transmitter (FM tone and CW). OOK transmitter for common remote encoders PT2262, doorbells, remote outlets, some garage doors… RDS (Radio Data System) PSN, RadioText and Time groups transmitter. Meteorological radiosonde receiver for M10 and M2K2… Nuoptix DTMF sync transmitter. TouchTunes jukebox universal remote. LCR (Language de Commande Routier) message generator. Street lighting control transmitter (CCIR tones). “Play Dead” in case of emergency. Fully configurable RF signal generator. RSSI audio output as pitch (for direction finding). 2.4 inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Micro SD card slot for data and code storage. Some features demonstrated in 2016 February 22 firmware video. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Some assembly is required. Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receive. The item “2020 Latest PortaPack + HackRF One SDR + Metal Case + TCXO + Havoc Firmware” is in sale since Tuesday, May 19, 2020. This item is in the category “Mobile Phones & Communication\Radio Communication Equipment\Ham/Amateur Radio\Ham Radio Transceivers”. The seller is “flyxy2015″ and is located in . This item can be shipped worldwide.

• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2020/08/2020-latest-portapack-hackrf-one-sdr-metal-case-tcxo-havoc-firmware/feed/ 0 https://hamradiotransceiver.biz/2020/05/elecraft-k2100-latest-rev-with-all-options/ https://hamradiotransceiver.biz/2020/05/elecraft-k2100-latest-rev-with-all-options/#comments Wed, 20 May 2020 05:42:58 +0000 http://hamradiotransceiver.biz/2020/05/elecraft-k2100-latest-rev-with-all-options/ read more]]>













ELECRAFT K2/100 latest rev with all options (High serial number). KSB2 SSB Module 160M Module KNB2 Noise Blanker Module K60XV 60-M and transverter adapter IF Module by DX Engineering RS232 internal adapter (please see Elecraft website for pin out configuration) Heil headset Please see the following Elecrafts website for specs and details This Excellent HF 100 Watt transceiver was professionally built and filters aligned with Spectrogram software. It operates on 160M 10M (including 60M) , has two VFOs, Noise blanker, DSP and real time clock, CW spot feature, several digital filters! The radio is at the latest revision level. Based on several questions I received ; my advice is to search for the full manual on the Elecraft website. Filters are user defined. Then a short re-cal process takes place. Best tool for filter setup is to use Spectrogram (free version). On the website there are instructions for setting up both SSB and CW filters with Spectogram. The K2 was only offered as a kit. Assembly which included the soldering of all components takes an enormous amount of time. The manual outlines all the cal procedures you have to undergo. Please read the assembly manual. As much as I would like to sell this radio make sure you understand the calibration steps. The unit is fully operational now. No need for cal procedures but this radio may not be for you. The item “ELECRAFT K2/100 latest rev with all options” is in sale since Saturday, May 16, 2020. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “howismyaudio” and is located in Abilene, Texas. This item can be shipped to United States.

• Type: Ham Radio Transceiver
• Brand: Elecraft

]]> https://hamradiotransceiver.biz/2020/05/elecraft-k2100-latest-rev-with-all-options/feed/ 0 https://hamradiotransceiver.biz/2020/02/2019-latest-version-portapack-case-for-hackrf-one-sdr-software-defined-radio/ https://hamradiotransceiver.biz/2020/02/2019-latest-version-portapack-case-for-hackrf-one-sdr-software-defined-radio/#comments Fri, 21 Feb 2020 00:16:17 +0000 http://hamradiotransceiver.biz/2020/02/2019-latest-version-portapack-case-for-hackrf-one-sdr-software-defined-radio/ read more]]>









PortaPack does not include the HackRF One. Only Portapack and meta case. TFT240320 screen (model: ER-TFT024-3). 6.4 layer gold plate. ROSH process (exported to Europe and America). The latest version is updated with the latest documents in 2017.5 month. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). 2.4 inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Micro SD card slot for data and code storage. Some features demonstrated in 2016 February 22 firmware video. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Some assembly is required. PortaPack does not include a HackRF One. International buyers please note: a. These charges are buyers responsibility. If the item is not as described or damaged in transportation, please send it back within 7 days upon date of receipt. Items must be unused, in original packaging and include all parts, accessories and packaging. The item “2019 Latest Version PORTAPACK + Case FOR HACKRF ONE SDR Software Defined Radio” is in sale since Tuesday, August 13, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “vrg5612″ and is located in shenzhen. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2020/02/2019-latest-version-portapack-case-for-hackrf-one-sdr-software-defined-radio/feed/ 0 https://hamradiotransceiver.biz/2019/08/2019-latest-portapack-hackrf-one-sdr-metal-case-txco-havoc-firmware/ https://hamradiotransceiver.biz/2019/08/2019-latest-portapack-hackrf-one-sdr-metal-case-txco-havoc-firmware/#comments Mon, 12 Aug 2019 15:16:44 +0000 http://hamradiotransceiver.biz/2019/08/2019-latest-portapack-hackrf-one-sdr-metal-case-txco-havoc-firmware/ read more]]>












The hackrf one is inlcuded and it is open source and made in china. Package including : 1 pcs portapack with hackrf one and a case a antenna. You can flash the firmware also yourself from this link. New PORTAPACK with 0.5ppm TCXO clock FOR HACKRF ONE SDR Software Defined Radio with metal case working from -40 100. Integrated 0.5ppm TCXO. Add a PortaPack H1 to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack H1 attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, 0.5ppm clock reference, real-time clock, micro SD card slot, and custom aluminum case. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). According to source code: github. Com/sharebrained/portapack-hackrf. Redesign this hardware and share it to the enthusiast. Has completed the program validation prototype. The latest 2018.10 month documents are based on improvements. The PortaPack is open-source — hardware and firmware. The source files are published on GitHub. Contributions, forks, and bug reports. 2.4 inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Headphone/microphone jack, compatible with recent. Samsung and Apple mobile headsets. Micro SD card slot for data and code storage. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Some assembly is required. Are documented in the support wiki and videos. Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver. TFT240320 screen (model: ER-TFT024-3). 7.4 layer gold plate. ROSH process (exported to Europe and America). The latest version is updated with the latest documents in 2018.10 month. Operating freq: 1 MHz to 6 GHz. Supported sample rates: 2 Msps to 20 Msps (quadrature). Interface: High Speed USB (with USB Micro-B connector). Power supply: USB bus power. Software-controlled antenna port power (max 50 mA at 3.3 V). SMA female antenna connector (50 ohms). SMA female clock input and output for synchronization. Convenient buttons for programming. Pin headers for expansion. The item “2019 Latest PortaPack + HackRF One SDR + Metal Case + TXCO + Havoc Firmware” is in sale since Wednesday, July 3, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “fcsdeal” and is located in . This item can be shipped worldwide.

• Country/Region of Manufacture: China
• MPN: Does Not Apply
• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2019/08/2019-latest-portapack-hackrf-one-sdr-metal-case-txco-havoc-firmware/feed/ 0 https://hamradiotransceiver.biz/2019/06/anytone-at-6666-us-seller-warranty-and-installed-tone-board-latest-version/ https://hamradiotransceiver.biz/2019/06/anytone-at-6666-us-seller-warranty-and-installed-tone-board-latest-version/#comments Tue, 11 Jun 2019 12:49:39 +0000 http://hamradiotransceiver.biz/2019/06/anytone-at-6666-us-seller-warranty-and-installed-tone-board-latest-version/ read more]]>




These are brand new Anytone AT-6666 radios. Factory Installed CTCSS encode/decode board. Many sellers do not have this option installed. Radio performance tuned for better output. This is usually a 25 to 40 dollar option. We include this in the setup at no additional cost. Radio is the latest version with all the updates from the factory. We stand behind our radios! We have stock on hand here in the United States. Look at my other listing for the programming cable for this radio!! General Specifications (Factory Specs). Frequency Range (HF Mode): 28.000-29.700 MHz. Frequency Range (Export Mode): 25.615-30.105 MHz. Channel 40 channels (programmable) in each band. PTT Microphone with UP/DN and coiled cord. Input voltage 13.8V. Antenna connector UHF SO239. Frequency Control Phase-Locked-Loop Synthesizer. Frequency Tolerance 0.005%. Frequency Stability 0.001%. Temperature Range -20c + 50c. Current Drain 10A (with modulation). Output Impedance 50 ohms, unbalanced. 3rd order, more than -25dB. 5th order, more than -35dB. SSB Carrier Suppression 55dB. 10.695 MHz 1st IF, 455 KHz 2nd IF. RF Gain Control 45 dB for optimum signal reception. Less than 10 dB change from 10 to 100,000 mv. Squelch Adjustable: threshold less than 1.0µV. Audio Output Power 3 watts into 8 ohms. SSB 450 to 2500 Hz. Built-in Speaker 8 ohms, round. Image Rejection: More than 65 dB. The item “Anytone AT-6666 US Seller Warranty and Installed Tone Board! Latest Version” is in sale since Wednesday, March 6, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “jamiec4368″ and is located in Rockford, Illinois. This item can be shipped to United States.

• Model: AT-6666
• Band: HF
• Band Plan: 10 Meters
• Type: Mobile/In-Vehicle
• Supported Modes: AM
• Brand: AnyTone

]]> https://hamradiotransceiver.biz/2019/06/anytone-at-6666-us-seller-warranty-and-installed-tone-board-latest-version/feed/ 0 https://hamradiotransceiver.biz/2019/05/latest-10mhz-sine-wave-sinewave-gps-disciplined-clock-gpsdo-with-lcd-display-2/ https://hamradiotransceiver.biz/2019/05/latest-10mhz-sine-wave-sinewave-gps-disciplined-clock-gpsdo-with-lcd-display-2/#comments Tue, 14 May 2019 22:18:44 +0000 http://hamradiotransceiver.biz/2019/05/latest-10mhz-sine-wave-sinewave-gps-disciplined-clock-gpsdo-with-lcd-display-2/ read more]]>












Welcome to my shop. Latest 10MHZ SINE WAVE Sinwave GPS DISCiPLINED CLOCK GPSDO with LCD Display. NAME:LCD-GPS DISCIPLINED OSCILLATOR. POWER:DC11.7-12.9V<=15W. GPS ANT POWER:DC3.3V/50mA. 1PPS OUTPUT:SQUARE WAVE, 3.3Vpp. 10M OUTPUT :SINE WAVE, 1Vrms (10-15dBm), square wave, 3.3/4.7Vpp. RS232 OUTPUT:GPS NMEA SIGNAL. Display:GPS strength, time, frequency(multi display mode). ACCURACY: above than OCXO 2 order of magnitude. SIZE:WHD=10755172mm(INCLUDE BNC CONNECT). 5 meters GPS ANT. Please make sure it is correct. We believe our items are so outstanding. All products are quality checked. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and friendly manner. We appreciate your Postive Feedback, and will do the same in return. The item "Latest 10MHZ SINE WAVE Sinewave GPS DISCiPLINED CLOCK GPSDO with LCD Display" is in sale since Wednesday, December 20, 2017. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers". The seller is "diyelecmall108" and is located in ShenZhen ,Guangdong. This item can be shipped worldwide.

• Brand: Unbranded/Generic
• MPN: Does Not Apply
• UPC: Does Not Apply
• EAN: Does Not Apply

]]> https://hamradiotransceiver.biz/2019/05/latest-10mhz-sine-wave-sinewave-gps-disciplined-clock-gpsdo-with-lcd-display-2/feed/ 0 https://hamradiotransceiver.biz/2019/04/portapack-for-hackrf-one-sdr-software-2017-latest-version-defined-radio-metal/ https://hamradiotransceiver.biz/2019/04/portapack-for-hackrf-one-sdr-software-2017-latest-version-defined-radio-metal/#comments Sat, 06 Apr 2019 07:51:23 +0000 http://hamradiotransceiver.biz/2019/04/portapack-for-hackrf-one-sdr-software-2017-latest-version-defined-radio-metal/ read more]]>











2017 latest version PORTAPACK FOR HACKRF ONE SDR Software Defined Radio with metal case. Package including portapack for hackrf one with a case. The case headset hole is for iphone headset or same size headset. More information you can go to this web. According to source code: github. Com/sharebrained/portapack-hackrf. Redesign this hardware and share it to the enthusiast. Has completed the program validation prototype. The latest 2017.5 month documents are based on improvements. TFT240320 screen (model: ER-TFT024-3). 7.4 layer gold plate. ROSH process (exported to Europe and America). The latest version is updated with the latest documents in 2017.5 month. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). The PortaPack is open-source — hardware and firmware. The source files are published on GitHub. Contributions, forks, and bug reports. 2.4 inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Headphone/microphone jack, compatible with recent. Samsung and Apple mobile headsets. Coin battery for preserving settings and date/time. Micro SD card slot for data and code storage. Some features demonstrated in 2016 February 22 firmware video. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Some assembly is required. Are documented in the support wiki and videos. PortaPack does not include a HackRF One. Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver. Return accepted in 30 days after reciving the item. The item “PORTAPACK FOR HACKRF ONE SDR Software 2017 Latest Version Defined Radio Metal” is in sale since Wednesday, December 12, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “smartbuy_merchandise” and is located in Shanghai. This item can be shipped worldwide.

• Brand: HAKRC
• MPN: Does not apply
• Country/Region of Manufacture: China
• Use: Vehicles & Remote Control Toys
• RC Parts & Accs: Antennas
• Modified Item: No
• Non-Domestic Product: No
• Custom Bundle: No
• Material: Plastic

]]> https://hamradiotransceiver.biz/2019/04/portapack-for-hackrf-one-sdr-software-2017-latest-version-defined-radio-metal/feed/ 0