Ham Radio Transceiver

Ham Radio Transceiver » metal https://hamradiotransceiver.biz Sun, 06 Sep 2026 21:54:43 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 2019 Latest PORTAPACK + Metal Case + 0.5ppm TXCO For HACKRF ONE SDR Radio https://hamradiotransceiver.biz/2021/04/2019-latest-portapack-metal-case-0-5ppm-txco-for-hackrf-one-sdr-radio/ https://hamradiotransceiver.biz/2021/04/2019-latest-portapack-metal-case-0-5ppm-txco-for-hackrf-one-sdr-radio/#comments Fri, 23 Apr 2021 01:58:57 +0000 http://hamradiotransceiver.biz/2021/04/2019-latest-portapack-metal-case-0-5ppm-txco-for-hackrf-one-sdr-radio/ read more]]>

2019 Latest PORTAPACK + Metal Case + 0.5ppm TXCO For HACKRF ONE SDR Radio

2019 Latest PORTAPACK + Metal Case + 0.5ppm TXCO For HACKRF ONE SDR Radio. PortaPack does not include the HackRF One. Only Portapack and meta case. TFT240320 screen (model: ER-TFT024-3). 6.4 layer gold plate. ROSH process (exported to Europe and America). The latest version is updated with the latest documents in 2017.5 month. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). 2.4 inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Micro SD card slot for data and code storage. Some features demonstrated in 2016 February 22 firmware video. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Some assembly is required. PortaPack does not include a HackRF One. Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receive. International buyers please note. These charges are buyers responsibility. If the item is not as described or damaged in transportation, please send it back within 7 days upon date of receipt. Items must be unused, in original packaging and include all parts, accessories and packaging. The item “2019 Latest PORTAPACK + Metal Case + 0.5ppm TXCO For HACKRF ONE SDR Radio” is in sale since Wednesday, July 3, 2019. This item is in the category “Mobile Phones & Communication\Radio Communication Equipment\Ham/Amateur Radio\Ham Radio Transceivers”. The seller is “mylove2014alice” and is located in . This item can be shipped worldwide.

MPN: Does Not Apply
Brand: Unbranded

]]> https://hamradiotransceiver.biz/2021/04/2019-latest-portapack-metal-case-0-5ppm-txco-for-hackrf-one-sdr-radio/feed/ 0 Latest PortaPack +HackRF One SDR + TXCO +Metal Case +Havoc for GPS simulator https://hamradiotransceiver.biz/2020/10/latest-portapack-hackrf-one-sdr-txco-metal-case-havoc-for-gps-simulator/ https://hamradiotransceiver.biz/2020/10/latest-portapack-hackrf-one-sdr-txco-metal-case-havoc-for-gps-simulator/#comments Wed, 07 Oct 2020 18:51:14 +0000 http://hamradiotransceiver.biz/2020/10/latest-portapack-hackrf-one-sdr-txco-metal-case-havoc-for-gps-simulator/ read more]]>

Latest PortaPack +HackRF One SDR + TXCO +Metal Case +Havoc for GPS simulator

Package including hackrf one with portapack and a metal case and a antenna , the havoc firmware is installed. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). Microphone FM transmit with CTCSS. Frequency manager (save & load from SD card, with categories and notes). “Soundboard” wave file player (put 8-bit mono files in SD card /wav directory). ADS-B receiver with map view. Fully configurable transmit signals. Morse transmitter (FM tone and CW). OOK transmitter for common remote encoders PT2262, doorbells, remote outlets, some garage doors… RDS (Radio Data System) PSN, RadioText and Time groups transmitter. Meteorological radiosonde receiver for M10 and M2K2… Nuoptix DTMF sync transmitter. TouchTunes jukebox universal remote. LCR (Language de Commande Routier) message generator. Street lighting control transmitter (CCIR tones). “Play Dead” in case of emergency. Fully configurable RF signal generator. RSSI audio output as pitch (for direction finding). 2.4 inch, 240 x 320 RGB LCD with touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Micro SD card slot for data and code storage. Some features demonstrated in 2016 February 22 firmware video. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receive. The item “Latest PortaPack +HackRF One SDR + TXCO +Metal Case +Havoc for GPS simulator” is in sale since Friday, May 8, 2020. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “fcsdeal” and is located in . This item can be shipped worldwide.

Country/Region of Manufacture: China
MPN: Does Not Apply
Brand: Unbranded

]]> https://hamradiotransceiver.biz/2020/10/latest-portapack-hackrf-one-sdr-txco-metal-case-havoc-for-gps-simulator/feed/ 0 2020 Latest PortaPack + HackRF One SDR + Metal Case + TCXO + Havoc Firmware https://hamradiotransceiver.biz/2020/08/2020-latest-portapack-hackrf-one-sdr-metal-case-tcxo-havoc-firmware/ https://hamradiotransceiver.biz/2020/08/2020-latest-portapack-hackrf-one-sdr-metal-case-tcxo-havoc-firmware/#comments Sun, 30 Aug 2020 13:05:36 +0000 http://hamradiotransceiver.biz/2020/08/2020-latest-portapack-hackrf-one-sdr-metal-case-tcxo-havoc-firmware/ read more]]>

2020 Latest PortaPack + HackRF One SDR + Metal Case + TCXO + Havoc Firmware

2019 Latest PORTAPACK + HackRF One SDR Software Defined Radio + Metal Case +TXCO. The official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party’Havoc’ firmware is really what you’ll want to use with it since it contains many more decoders and transmit options. You can fully unleash the power of the Portapack as this comes with Havoc Firmware Installed! The case headset hole is for iphone headset or same size headset. According to source code: github. Com/sharebrained/portapack-hackrf. Redesign this hardware and share it to the enthusiast. Has completed the program validation prototype. The latest 2017.5 month documents are based on improvements. One of the best things about the PortaPack is that it makes capture and replay of wireless signals like those from ISM band remote controls extremely easy. To create a capture you just need to enter the “Capture” menu, set the frequency of the remote key, press the red’R’ Record button and then press the key on the remote. Then stop the recording to save it to the SD Card. Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key. Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio jack simply hold down the right button to push to talk. If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones. There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple keyfobs, or things like home automatation switches. There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage! By connecting speakers to the Portapack’s 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled youcan receive aircraft. TFT240320 screen (model: ER-TFT024-3). 6.4 layer gold plate. ROSH process (exported to Europe and America). The latest version is updated with the latest documents in 2017.5 month. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). Microphone FM transmit with CTCSS. Frequency manager (save & load from SD card, with categories and notes). “Soundboard” wave file player (put 8-bit mono files in SD card /wav directory). ADS-B receiver with map view. Fully configurable transmit signals. Morse transmitter (FM tone and CW). OOK transmitter for common remote encoders PT2262, doorbells, remote outlets, some garage doors… RDS (Radio Data System) PSN, RadioText and Time groups transmitter. Meteorological radiosonde receiver for M10 and M2K2… Nuoptix DTMF sync transmitter. TouchTunes jukebox universal remote. LCR (Language de Commande Routier) message generator. Street lighting control transmitter (CCIR tones). “Play Dead” in case of emergency. Fully configurable RF signal generator. RSSI audio output as pitch (for direction finding). 2.4 inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Micro SD card slot for data and code storage. Some features demonstrated in 2016 February 22 firmware video. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Some assembly is required. Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receive. The item “2020 Latest PortaPack + HackRF One SDR + Metal Case + TCXO + Havoc Firmware” is in sale since Tuesday, May 19, 2020. This item is in the category “Mobile Phones & Communication\Radio Communication Equipment\Ham/Amateur Radio\Ham Radio Transceivers”. The seller is “flyxy2015″ and is located in . This item can be shipped worldwide.

Brand: Unbranded

]]> https://hamradiotransceiver.biz/2020/08/2020-latest-portapack-hackrf-one-sdr-metal-case-tcxo-havoc-firmware/feed/ 0 2019 Latest PortaPack + HackRF One SDR + Metal Case + TXCO + Havoc Firmware https://hamradiotransceiver.biz/2019/08/2019-latest-portapack-hackrf-one-sdr-metal-case-txco-havoc-firmware/ https://hamradiotransceiver.biz/2019/08/2019-latest-portapack-hackrf-one-sdr-metal-case-txco-havoc-firmware/#comments Mon, 12 Aug 2019 15:16:44 +0000 http://hamradiotransceiver.biz/2019/08/2019-latest-portapack-hackrf-one-sdr-metal-case-txco-havoc-firmware/ read more]]>

2019 Latest PortaPack + HackRF One SDR + Metal Case + TXCO + Havoc Firmware

The hackrf one is inlcuded and it is open source and made in china. Package including : 1 pcs portapack with hackrf one and a case a antenna. You can flash the firmware also yourself from this link. New PORTAPACK with 0.5ppm TCXO clock FOR HACKRF ONE SDR Software Defined Radio with metal case working from -40 100. Integrated 0.5ppm TCXO. Add a PortaPack H1 to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack H1 attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, 0.5ppm clock reference, real-time clock, micro SD card slot, and custom aluminum case. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). According to source code: github. Com/sharebrained/portapack-hackrf. Redesign this hardware and share it to the enthusiast. Has completed the program validation prototype. The latest 2018.10 month documents are based on improvements. The PortaPack is open-source — hardware and firmware. The source files are published on GitHub. Contributions, forks, and bug reports. 2.4 inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Headphone/microphone jack, compatible with recent. Samsung and Apple mobile headsets. Micro SD card slot for data and code storage. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Some assembly is required. Are documented in the support wiki and videos. Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver. TFT240320 screen (model: ER-TFT024-3). 7.4 layer gold plate. ROSH process (exported to Europe and America). The latest version is updated with the latest documents in 2018.10 month. Operating freq: 1 MHz to 6 GHz. Supported sample rates: 2 Msps to 20 Msps (quadrature). Interface: High Speed USB (with USB Micro-B connector). Power supply: USB bus power. Software-controlled antenna port power (max 50 mA at 3.3 V). SMA female antenna connector (50 ohms). SMA female clock input and output for synchronization. Convenient buttons for programming. Pin headers for expansion. The item “2019 Latest PortaPack + HackRF One SDR + Metal Case + TXCO + Havoc Firmware” is in sale since Wednesday, July 3, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “fcsdeal” and is located in . This item can be shipped worldwide.

Country/Region of Manufacture: China
MPN: Does Not Apply
Brand: Unbranded

]]> https://hamradiotransceiver.biz/2019/08/2019-latest-portapack-hackrf-one-sdr-metal-case-txco-havoc-firmware/feed/ 0 PORTAPACK with 0.5ppm TCXO clock metal case FOR HACKRF ONE SDR Software Defined https://hamradiotransceiver.biz/2019/06/portapack-with-0-5ppm-tcxo-clock-metal-case-for-hackrf-one-sdr-software-defined/ https://hamradiotransceiver.biz/2019/06/portapack-with-0-5ppm-tcxo-clock-metal-case-for-hackrf-one-sdr-software-defined/#comments Thu, 27 Jun 2019 13:26:43 +0000 http://hamradiotransceiver.biz/2019/06/portapack-with-0-5ppm-tcxo-clock-metal-case-for-hackrf-one-sdr-software-defined/ read more]]>

PORTAPACK with 0.5ppm TCXO clock metal case FOR HACKRF ONE SDR Software Defined

The hackrf one is not inlcuded , only a portapack with a caseand it is open source and made in china. Package including : portapack for hackrf one with a case not including the hackrf one. You have to flash the firmware from this link first before you use. New PORTAPACK with 0.5ppm TCXO clock FOR HACKRF ONE SDR Software Defined Radio with metal case working from -40 100. Integrated 0.5ppm TCXO. Add a PortaPack H1 to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack H1 attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, 0.5ppm clock reference, real-time clock, micro SD card slot, and custom aluminum case. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). According to source code: github. Com/sharebrained/portapack-hackrf. Redesign this hardware and share it to the enthusiast. Has completed the program validation prototype. The latest 2018.10 month documents are based on improvements. The PortaPack is open-source — hardware and firmware. The source files are published on GitHub. Contributions, forks, and bug reports. 2.4 inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Headphone/microphone jack, compatible with recent. Samsung and Apple mobile headsets. Micro SD card slot for data and code storage. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Some assembly is required. Are documented in the support wiki and videos. PortaPack does not include a HackRF One. Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver. TFT240320 screen (model: ER-TFT024-3). 7.4 layer gold plate. ROSH process (exported to Europe and America). The latest version is updated with the latest documents in 2018.10 month. The item “PORTAPACK with 0.5ppm TCXO clock metal case FOR HACKRF ONE SDR Software Defined” is in sale since Monday, May 27, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “fcsdeal” and is located in . This item can be shipped worldwide.

Country/Region of Manufacture: China
MPN: Does Not Apply
Brand: Unbranded

Incoming search terms:

TCXO installation on HackRF

]]> https://hamradiotransceiver.biz/2019/06/portapack-with-0-5ppm-tcxo-clock-metal-case-for-hackrf-one-sdr-software-defined/feed/ 0 PORTAPACK FOR HACKRF ONE SDR Software 2017 Latest Version Defined Radio Metal https://hamradiotransceiver.biz/2019/04/portapack-for-hackrf-one-sdr-software-2017-latest-version-defined-radio-metal/ https://hamradiotransceiver.biz/2019/04/portapack-for-hackrf-one-sdr-software-2017-latest-version-defined-radio-metal/#comments Sat, 06 Apr 2019 07:51:23 +0000 http://hamradiotransceiver.biz/2019/04/portapack-for-hackrf-one-sdr-software-2017-latest-version-defined-radio-metal/ read more]]>

PORTAPACK FOR HACKRF ONE SDR Software 2017 Latest Version Defined Radio Metal

2017 latest version PORTAPACK FOR HACKRF ONE SDR Software Defined Radio with metal case. Package including portapack for hackrf one with a case. The case headset hole is for iphone headset or same size headset. More information you can go to this web. According to source code: github. Com/sharebrained/portapack-hackrf. Redesign this hardware and share it to the enthusiast. Has completed the program validation prototype. The latest 2017.5 month documents are based on improvements. TFT240320 screen (model: ER-TFT024-3). 7.4 layer gold plate. ROSH process (exported to Europe and America). The latest version is updated with the latest documents in 2017.5 month. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot. Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). The PortaPack is open-source — hardware and firmware. The source files are published on GitHub. Contributions, forks, and bug reports. 2.4 inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Headphone/microphone jack, compatible with recent. Samsung and Apple mobile headsets. Coin battery for preserving settings and date/time. Micro SD card slot for data and code storage. Some features demonstrated in 2016 February 22 firmware video. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Some assembly is required. Are documented in the support wiki and videos. PortaPack does not include a HackRF One. Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver. Return accepted in 30 days after reciving the item. The item “PORTAPACK FOR HACKRF ONE SDR Software 2017 Latest Version Defined Radio Metal” is in sale since Wednesday, December 12, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “smartbuy_merchandise” and is located in Shanghai. This item can be shipped worldwide.

Brand: HAKRC
MPN: Does not apply
Country/Region of Manufacture: China
Use: Vehicles & Remote Control Toys
RC Parts & Accs: Antennas
Modified Item: No
Non-Domestic Product: No
Custom Bundle: No
Material: Plastic

]]> https://hamradiotransceiver.biz/2019/04/portapack-for-hackrf-one-sdr-software-2017-latest-version-defined-radio-metal/feed/ 0