Ham Radio Transceiver

Ham Radio Transceiver » option https://hamradiotransceiver.biz Mon, 21 Sep 2026 10:32:43 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 Original CatDisplay for Yaesu FT-818ND with new HUD option https://hamradiotransceiver.biz/2021/06/original-catdisplay-for-yaesu-ft-818nd-with-new-hud-option/ https://hamradiotransceiver.biz/2021/06/original-catdisplay-for-yaesu-ft-818nd-with-new-hud-option/#comments Sat, 19 Jun 2021 01:58:59 +0000 http://hamradiotransceiver.biz/2021/06/original-catdisplay-for-yaesu-ft-818nd-with-new-hud-option/ read more]]>

Original CatDisplay for Yaesu FT-818ND with new HUD option

FT-857, FT-857ND, FT-897, FT-897ND. FT991, FT-450, FT-950, FT-2000, FT-DX10, FT-DX101, FT-DX1200, FT-DX3000, FT-DX5000. I appreciate your custom & patience. An easy to connect external display for Yaesu FT-818ND. LEFT or RIGHT cat cable entry. Heads Up Display mode so you can view via a reflective surface. CatDisplay plugs into the transceiver CAT port. It reads data from the transceiver, detects & decodes any changes then updates the display. As you change modes, the CatDisplay changes the information shown. At a glance, you instantly see important settings for the current mode. Ideal for the visually impaired. Light, easy to connect, easy to use. Vastly improves your rig experience. Makes a complicated transceiver easier to use. Less searching through menus, less chance of forgetting. Simple plug-and-play installation, automatically detects Cat speed. Ideal for rigs suffering from failing LCD – missing lines & segments. This version is for FT-818ND transceivers that have 16 bands (models that include the 60m band). It will work on models that do not have have the 60m band. But as you move up the band past 80m, the reported band display is out by 1. CatDisplay reads information from the transceiver only. It does not write information to the transceiver and cannot be used to control the transceiver. Unlike computer programs & other displays that control the transceiver, CatDisplay will not cause EEPROM wear and will therefore not cause damage to the transceiver. Does not have a CAT pass through port so you cannot plug another device into the CatDisplay. Transceiver must be in VFO mode to reliably read many settings. CTCSS, DCS, memory tags, extended memory functions and other less frequently used features are not displayed. Some changes on the transceiver do not show up immediately because the transceiver does not update its EEPROM immediately. This is a function of Yaesu control program and not CatDisplay. Does not show SWR, but does have high SWR indicator, output power & modulation meters. Cat cable has pins in its plugs & they only go in one way. Do not force them or you will break the plug, socket or both. The TFT display is fragile and can be broken. Treat it with respect, do not place it in direct sunlight, do not squeeze or press on it. High RF fields may cause interference. If the display becomes corrupted during transmit, this is likely due to high RF field which needs to be remedied. The most common cause is poor earth connection, high antenna SWR or very close proximity to the antenna. Lefever in Belgium are a very early version of CatDisplay hardware and firmware & will not be supported by me. The latest hardware is v1.441 and firmware is v2. This sale is for one tested and assembled CatDisplay including 3D printed case & 1.5m Cat cable. Does not include power supply or transceiver. CatDisplay is very easy to install & a user guide is supplied. This is a technical product hand made by a hobbyist. The item “Original CatDisplay for Yaesu FT-818ND with new HUD option” is in sale since Friday, July 31, 2020. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “c_day-nz” and is located in Oamaru. This item can be shipped worldwide.

Model: CatDisplay
Type: External Display
Compatible Product: FT-818ND
Brand: Unbranded

]]> https://hamradiotransceiver.biz/2021/06/original-catdisplay-for-yaesu-ft-818nd-with-new-hud-option/feed/ 0 Original CatDisplay for Yaesu FT-897 FT-897D with new HUD option https://hamradiotransceiver.biz/2021/05/original-catdisplay-for-yaesu-ft-897-ft-897d-with-new-hud-option/ https://hamradiotransceiver.biz/2021/05/original-catdisplay-for-yaesu-ft-897-ft-897d-with-new-hud-option/#comments Sun, 02 May 2021 02:17:13 +0000 http://hamradiotransceiver.biz/2021/05/original-catdisplay-for-yaesu-ft-897-ft-897d-with-new-hud-option/ read more]]>

Original CatDisplay for Yaesu FT-897 FT-897D with new HUD option

FT-857, FT-857ND, FT-897, FT-897ND. FT991, FT-450, FT-950, FT-2000, FT-DX10, FT-DX101, FT-DX1200, FT-DX3000, FT-DX5000. NOTE: Delays due to reduced flights. I appreciate your custom & patience. An easy to connect external display for Yaesu FT-857, FT-857D, FT-897 & FT-897D. LEFT or RIGHT cat cable entry. Heads Up Display mode so you can view via a reflective surface. CatDisplay plugs into the transceiver CAT port. It reads data from the transceiver, detects & decodes any changes then updates the display. As you change modes, the CatDisplay changes the information shown. At a glance, you instantly see important settings for the current mode. Ideal for the visually impaired. Light, easy to connect, easy to use. Vastly improves your rig experience. Makes a complicated transceiver easier to use. Less searching through menus, less chance of forgetting. Simple plug-and-play installation, automatically detects Cat speed. Ideal for rigs suffering from failing LCD – missing lines & segments. CatDisplay reads information from the transceiver only. It does not write information to the transceiver and cannot be used to control the transceiver. Unlike computer programs & other displays that control the transceiver, CatDisplay will not cause EEPROM wear and will therefore not cause damage to the transceiver. Does not have a CAT pass through port so you cannot plug another device into the CatDisplay. Transceiver must be in VFO mode to reliably read many settings. CTCSS, DCS, memory tags, extended memory functions and other less frequently used features are not displayed. Some changes on the transceiver do not show up immediately because the transceiver does not update its EEPROM immediately. This is a function of Yaesu control program and not CatDisplay. Does not show SWR, but does have high SWR indicator, output power & modulation meters. Cat cable has pins in its plugs & they only go in one way. Do not force them or you will break the plug, socket or both. The TFT display is fragile and can be broken. Treat it with respect, do not place it in direct sunlight, do not squeeze or press on it. High RF fields may cause interference. If the display becomes corrupted during transmit, this is likely due to high RF field which needs to be remedied. The most common cause is poor earth connection, high antenna SWR or very close proximity to the antenna. Lefever in Belgium are a very early version of CatDisplay hardware and firmware & will not be supported by me. The latest hardware is v1.441 and firmware is v2. This sale is for one tested and assembled CatDisplay including 3D printed case & 1.5m Cat cable. Does not include power supply or transceiver. CatDisplay is very easy to install & a user guide is supplied. This is a technical product hand made by a hobbyist. Thank you Robert KI4HEE for allowing me to use your picture! The item “Original CatDisplay for Yaesu FT-897 FT-897D with new HUD option” is in sale since Sunday, February 17, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment”. The seller is “c_day-nz” and is located in Oamaru. This item can be shipped worldwide.

To Fit: Ham Radio Transceiver
Country/Region of Manufacture: New Zealand
Custom Bundle: No
Compatible Brand: For Yaesu
Band: AM
Connectivity: 8 Pin Mini-DIN
Type: TFT Display
Features: Back-Lit LCD Display
Compatible Model: FT857 FT897 FT857D FT897D
Mount Type: None
MPN: Does Not Apply
Modified Item: No
Non-Domestic Product: No
Brand: ZL1CVD
Voltage: 5V via CAT or 7V to 30V DC external via 2.1mm Jack

]]> https://hamradiotransceiver.biz/2021/05/original-catdisplay-for-yaesu-ft-897-ft-897d-with-new-hud-option/feed/ 0 Original CatDisplay for Yaesu FT-857 or FT-897 with new HUD option https://hamradiotransceiver.biz/2021/04/original-catdisplay-for-yaesu-ft-857-or-ft-897-with-new-hud-option/ https://hamradiotransceiver.biz/2021/04/original-catdisplay-for-yaesu-ft-857-or-ft-897-with-new-hud-option/#comments Tue, 27 Apr 2021 02:09:40 +0000 http://hamradiotransceiver.biz/2021/04/original-catdisplay-for-yaesu-ft-857-or-ft-897-with-new-hud-option/ read more]]>

Original CatDisplay for Yaesu FT-857 or FT-897 with new HUD option

FT-857, FT-857ND, FT-897, FT-897ND. FT991, FT-450, FT-950, FT-2000, FT-DX10, FT-DX101, FT-DX1200, FT-DX3000, FT-DX5000. NOTE: Delays due to reduced flights. I appreciate your custom & patience. An easy to connect external display for Yaesu FT-857, FT-857D, FT-897 & FT-897D. LEFT or RIGHT cat cable entry. Heads Up Display mode so you can view via a reflective surface. CatDisplay plugs into the transceiver CAT port. It reads data from the transceiver, detects & decodes any changes then updates the display. As you change modes, the CatDisplay changes the information shown. At a glance, you instantly see important settings for the current mode. Ideal for the visually impaired. Light, easy to connect, easy to use. Vastly improves your rig experience. Makes a complicated transceiver easier to use. Less searching through menus, less chance of forgetting. Simple plug-and-play installation, automatically detects Cat speed. Ideal for rigs suffering from failing LCD – missing lines & segments. CatDisplay reads information from the transceiver only. It does not write information to the transceiver and cannot be used to control the transceiver. Unlike computer programs & other displays that control the transceiver, CatDisplay will not cause EEPROM wear and will therefore not cause damage to the transceiver. Does not have a CAT pass through port so you cannot plug another device into the CatDisplay. Transceiver must be in VFO mode to reliably read many settings. CTCSS, DCS, memory tags, extended memory functions and other less frequently used features are not displayed. Some changes on the transceiver do not show up immediately because the transceiver does not update its EEPROM immediately. This is a function of Yaesu control program and not CatDisplay. Does not show SWR, but does have high SWR indicator, output power & modulation meters. Cat cable has pins in its plugs & they only go in one way. Do not force them or you will break the plug, socket or both. The TFT display is fragile and can be broken. Treat it with respect, do not place it in direct sunlight, do not squeeze or press on it. High RF fields may cause interference. If the display becomes corrupted during transmit, this is likely due to high RF field which needs to be remedied. The most common cause is poor earth connection, high antenna SWR or very close proximity to the antenna. Lefever in Belgium are a very early version of CatDisplay hardware and firmware & will not be supported by me. The latest hardware is v1.441 and firmware is v2. This sale is for one tested and assembled CatDisplay including 3D printed case & 1.5m Cat cable. Does not include power supply or transceiver. CatDisplay is very easy to install & a user guide is supplied. This is a technical product hand made by a hobbyist. The item “Original CatDisplay for Yaesu FT-857 or FT-897 with new HUD option” is in sale since Monday, January 28, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment”. The seller is “c_day-nz” and is located in Oamaru. This item can be shipped worldwide.

Features: Back-Lit LCD Display
Custom Bundle: No
MPN: Does Not Apply
Compatible Model: FT-857 FT-897 FT-857D FT-897D
Modified Item: No
Country/Region of Manufacture: New Zealand
To Fit: Ham Radio Transceiver
Non-Domestic Product: No
Compatible Brand: For Yaesu
Brand: ZL1CVD
Type: TFT Display

]]> https://hamradiotransceiver.biz/2021/04/original-catdisplay-for-yaesu-ft-857-or-ft-897-with-new-hud-option/feed/ 0 Original CatDisplay for Yaesu FT-817 FT-817ND with new HUD option https://hamradiotransceiver.biz/2021/01/original-catdisplay-for-yaesu-ft-817-ft-817nd-with-new-hud-option-2/ https://hamradiotransceiver.biz/2021/01/original-catdisplay-for-yaesu-ft-817-ft-817nd-with-new-hud-option-2/#comments Mon, 18 Jan 2021 11:54:45 +0000 http://hamradiotransceiver.biz/2021/01/original-catdisplay-for-yaesu-ft-817-ft-817nd-with-new-hud-option-2/ read more]]>

Original CatDisplay for Yaesu FT-817 FT-817ND with new HUD option

I appreciate your custom & patience. An easy to connect external display for Yaesu FT-817 & FT-817ND. LEFT or RIGHT cat cable entry. Heads Up Display mode so you can view via a reflective surface. CatDisplay plugs into the transceiver CAT port. It reads data from the transceiver, detects & decodes any changes then updates the display. As you change modes, the CatDisplay changes the information shown. At a glance, you instantly see important settings for the current mode. Ideal for the visually impaired. Light, easy to connect, easy to use. Vastly improves your rig experience. Makes a complicated transceiver easier to use. Less searching through menus, less chance of forgetting. Simple plug-and-play installation, automatically detects Cat speed. Ideal for rigs suffering from failing LCD – missing lines & segments. This version is for FT-817 transceivers that only have 15 bands (models that do not have the 60m band). It will work on models that have the 60m band (FT-818ND) but as you move up the band past 40m, the reported band display is out by 1. CatDisplay reads information from the transceiver only. It does not write information to the transceiver and cannot be used to control the transceiver. Unlike computer programs & other displays that control the transceiver, CatDisplay will not cause EEPROM wear and will therefore not cause damage to the transceiver. Does not have a CAT pass through port so you cannot plug another device into the CatDisplay. Transceiver must be in VFO mode to reliably read many settings. CTCSS, DCS, memory tags, extended memory functions and other less frequently used features are not displayed. Some changes on the transceiver do not show up immediately because the transceiver does not update its EEPROM immediately. This is a function of Yaesu control program and not CatDisplay. Does not show SWR, but does have high SWR indicator, output power & modulation meters. Cat cable has pins in its plugs & they only go in one way. Do not force them or you will break the plug, socket or both. The TFT display is fragile and can be broken. Treat it with respect, do not place it in direct sunlight, do not squeeze or press on it. High RF fields may cause interference. If the display becomes corrupted during transmit, this is likely due to high RF field which needs to be remedied. The most common cause is poor earth connection, high antenna SWR or very close proximity to the antenna. Lefever in Belgium are a very early version of CatDisplay hardware and firmware & will not be supported by me. The latest hardware is v1.441 and firmware is v2. This sale is for one tested and assembled CatDisplay including 3D printed case & 1.5m Cat cable. Does not include power supply or transceiver. CatDisplay is very easy to install & a user guide is supplied. This is a technical product hand made by a hobbyist. The item “Original CatDisplay for Yaesu FT-817 FT-817ND with new HUD option” is in sale since Friday, July 31, 2020. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “c_day-nz” and is located in Oamaru. This item can be shipped worldwide.

Model: CatDisplay
Type: External Display
Compatible Product: FT-817
Brand: Unbranded

]]> https://hamradiotransceiver.biz/2021/01/original-catdisplay-for-yaesu-ft-817-ft-817nd-with-new-hud-option-2/feed/ 0 Original CatDisplay for Yaesu FT-817 FT-817ND with new HUD option https://hamradiotransceiver.biz/2020/08/original-catdisplay-for-yaesu-ft-817-ft-817nd-with-new-hud-option/ https://hamradiotransceiver.biz/2020/08/original-catdisplay-for-yaesu-ft-817-ft-817nd-with-new-hud-option/#comments Sun, 09 Aug 2020 12:31:13 +0000 http://hamradiotransceiver.biz/2020/08/original-catdisplay-for-yaesu-ft-817-ft-817nd-with-new-hud-option/ read more]]>

I appreciate your custom & patience. An easy to connect external display for Yaesu FT-817 & FT-817ND. LEFT or RIGHT cat cable entry. Heads Up Display mode so you can view via a reflective surface. CatDisplay plugs into the transceiver CAT port. It reads data from the transceiver, detects & decodes any changes then updates the display. As you change modes, the CatDisplay changes the information shown. At a glance, you instantly see important settings for the current mode. Ideal for the visually impaired. Light, easy to connect, easy to use. Vastly improves your rig experience. Makes a complicated transceiver easier to use. Less searching through menus, less chance of forgetting. Simple plug-and-play installation, automatically detects Cat speed. Ideal for rigs suffering from failing LCD – missing lines & segments. This version is for FT-817 transceivers that only have 15 bands (models that do not have the 60m band). It will work on models that have the 60m band (FT-818ND) but as you move up the band past 40m, the reported band display is out by 1. CatDisplay reads information from the transceiver only. It does not write information to the transceiver and cannot be used to control the transceiver. Unlike computer programs & other displays that control the transceiver, CatDisplay will not cause EEPROM wear and will therefore not cause damage to the transceiver. Does not have a CAT pass through port so you cannot plug another device into the CatDisplay. Transceiver must be in VFO mode to reliably read many settings. CTCSS, DCS, memory tags, extended memory functions and other less frequently used features are not displayed. Some changes on the transceiver do not show up immediately because the transceiver does not update its EEPROM immediately. This is a function of Yaesu control program and not CatDisplay. Does not show SWR, but does have high SWR indicator, output power & modulation meters. Cat cable has pins in its plugs & they only go in one way. Do not force them or you will break the plug, socket or both. The TFT display is fragile and can be broken. Treat it with respect, do not place it in direct sunlight, do not squeeze or press on it. High RF fields may cause interference. If the display becomes corrupted during transmit, this is likely due to high RF field which needs to be remedied. The most common cause is poor earth connection, high antenna SWR or very close proximity to the antenna. Lefever in Belgium are a very early version of CatDisplay hardware and firmware & will not be supported by me. The latest hardware is v1.441 and firmware is v2. This sale is for one tested and assembled CatDisplay including 3D printed case & 1.5m Cat cable. Does not include power supply or transceiver. CatDisplay is very easy to install & a user guide is supplied. This is a technical product hand made by a hobbyist. The item “Original CatDisplay for Yaesu FT-817 FT-817ND with new HUD option” is in sale since Thursday, August 22, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment”. The seller is “c_day-nz” and is located in Oamaru. This item can be shipped worldwide.

To Fit: Ham Radio Transceiver
Country/Region of Manufacture: New Zealand
Custom Bundle: No
Compatible Brand: For Yaesu
Type: External Display
Compatible Model: FT-817
Features: Back-Lit LCD Display
MPN: Does Not Apply
Brand: ZL1CVD

]]> https://hamradiotransceiver.biz/2020/08/original-catdisplay-for-yaesu-ft-817-ft-817nd-with-new-hud-option/feed/ 0 Original CatDisplay for Yaesu FT-857ND or FT-897ND with new HUD option https://hamradiotransceiver.biz/2020/07/original-catdisplay-for-yaesu-ft-857nd-or-ft-897nd-with-new-hud-option/ https://hamradiotransceiver.biz/2020/07/original-catdisplay-for-yaesu-ft-857nd-or-ft-897nd-with-new-hud-option/#comments Fri, 31 Jul 2020 16:30:00 +0000 http://hamradiotransceiver.biz/2020/07/original-catdisplay-for-yaesu-ft-857nd-or-ft-897nd-with-new-hud-option/ read more]]>

Original CatDisplay for Yaesu FT-857ND or FT-897ND with new HUD option

I appreciate your custom & patience. An easy to connect external display for Yaesu FT-857, FT-857D, FT-897 & FT-897D. LEFT or RIGHT cat cable entry. Heads Up Display mode so you can view via a reflective surface. CatDisplay plugs into the transceiver CAT port. It reads data from the transceiver, detects & decodes any changes then updates the display. As you change modes, the CatDisplay changes the information shown. At a glance, you instantly see important settings for the current mode. Ideal for the visually impaired. Light, easy to connect, easy to use. Vastly improves your rig experience. Makes a complicated transceiver easier to use. Less searching through menus, less chance of forgetting. Simple plug-and-play installation, automatically detects Cat speed. Ideal for rigs suffering from failing LCD – missing lines & segments. CatDisplay reads information from the transceiver only. It does not write information to the transceiver and cannot be used to control the transceiver. Unlike computer programs & other displays that control the transceiver, CatDisplay will not cause EEPROM wear and will therefore not cause damage to the transceiver. Does not have a CAT pass through port so you cannot plug another device into the CatDisplay. Transceiver must be in VFO mode to reliably read many settings. CTCSS, DCS, memory tags, extended memory functions and other less frequently used features are not displayed. Some changes on the transceiver do not show up immediately because the transceiver does not update its EEPROM immediately. This is a function of Yaesu control program and not CatDisplay. Does not show SWR, but does have high SWR indicator, output power & modulation meters. Cat cable has pins in its plugs & they only go in one way. Do not force them or you will break the plug, socket or both. The TFT display is fragile and can be broken. Treat it with respect, do not place it in direct sunlight, do not squeeze or press on it. High RF fields may cause interference. If the display becomes corrupted during transmit, this is likely due to high RF field which needs to be remedied. The most common cause is poor earth connection, high antenna SWR or very close proximity to the antenna. This sale is for one tested and assembled CatDisplay including 3D printed case & 1.5m Cat cable. Does not include power supply or transceiver. CatDisplay is very easy to install & a user guide is supplied. This is a technical product hand made by a hobbyist. The item “Original CatDisplay for Yaesu FT-857ND or FT-897ND with new HUD option” is in sale since Sunday, August 11, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “c_day-nz” and is located in Oamaru. This item can be shipped worldwide.

Model: FT-857
Type: External Display
MPN: CatDisplay
Brand: Unbranded

]]> https://hamradiotransceiver.biz/2020/07/original-catdisplay-for-yaesu-ft-857nd-or-ft-897nd-with-new-hud-option/feed/ 0 Loaded Elecraft K2 Transceiver Has 100 Watt Amplifier, Ssb Option, Noise Blnkr https://hamradiotransceiver.biz/2019/04/loaded-elecraft-k2-transceiver-has-100-watt-amplifier-ssb-option-noise-blnkr/ https://hamradiotransceiver.biz/2019/04/loaded-elecraft-k2-transceiver-has-100-watt-amplifier-ssb-option-noise-blnkr/#comments Sun, 14 Apr 2019 20:37:12 +0000 http://hamradiotransceiver.biz/2019/04/loaded-elecraft-k2-transceiver-has-100-watt-amplifier-ssb-option-noise-blnkr/ read more]]>

Loaded Elecraft K2 Transceiver Has 100 Watt Amplifier, Ssb Option, Noise Blnkr

LOADED ELECRAFT K2 TRANSCEIVER – HAS 100 WATT AMPLIFIER, SSB OPTION, NOISE BLNKR. The K2 Transceiver, KPA100 100. Watt Amplifier, KIO2 Serial. Interface, KSB2 SSB Option, KNB2. Noise Blanker, DC power cord, and the ETS2 3. Radio looks almost as new. Total price from Elecraft is over. Photos are the actual ELECRAFT K2 Transceiver serial No. Download a free copy of the manual at the ELECRAFT web site. Almost every older electronic item will benefit from a careful alignment and cleaning or other restoration. Image may not be unique. I do not divulge reserve prices. Please contact me directly for any further information. Powered by SixBit’s eCommerce Solution. The item “LOADED ELECRAFT K2 TRANSCEIVER HAS 100 WATT AMPLIFIER, SSB OPTION, NOISE BLNKR” is in sale since Wednesday, March 27, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “jonweiner-k1vvc” and is located in Greer, South Carolina. This item can be shipped to United States.
Loaded Elecraft K2 Transceiver Has 100 Watt Amplifier, Ssb Option, Noise Blnkr

]]> https://hamradiotransceiver.biz/2019/04/loaded-elecraft-k2-transceiver-has-100-watt-amplifier-ssb-option-noise-blnkr/feed/ 0 Yaesu FTdx-1200 HF + 6M Amateur Radio Transceiver with FFT-1 Option Installed https://hamradiotransceiver.biz/2018/10/yaesu-ftdx-1200-hf-6m-amateur-radio-transceiver-with-fft-1-option-installed/ https://hamradiotransceiver.biz/2018/10/yaesu-ftdx-1200-hf-6m-amateur-radio-transceiver-with-fft-1-option-installed/#comments Tue, 30 Oct 2018 17:09:26 +0000 http://hamradiotransceiver.biz/2018/10/yaesu-ftdx-1200-hf-6m-amateur-radio-transceiver-with-fft-1-option-installed/ read more]]>

Yaesu FTdx-1200 HF + 6M Amateur Radio Transceiver with FFT-1 Option Installed

This has the FFT-1 installed. The FFT-1 accessory allows you to encode and decode Morse Code, PSK31 and RTTY and provides o. Ne-touch CW Auto Zero-in, to automatically tune the VFO to match the frequency and programmed pitch of a received CW signal. No scratches, dents or dings. Inluded in the sale is the radio, the 12 power cord, the original manual, hand held microphone (MH-31B8) and the original box. From a smoke free environment. The item “Yaesu FTdx-1200 HF + 6M Amateur Radio Transceiver with FFT-1 Option Installed” is in sale since Sunday, October 28, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “pleonelli” and is located in Fallbrook, California. This item can be shipped to United States.

Brand: Yaesu
Model: FT-DX1200
Type: Base Station
Frequency Band(s): HF
MPN: FT-DX1200
Band: HF

]]> https://hamradiotransceiver.biz/2018/10/yaesu-ftdx-1200-hf-6m-amateur-radio-transceiver-with-fft-1-option-installed/feed/ 0 Wideband CODAN 8528 HF SSB Transceiver International RARE Transmit Enable Option https://hamradiotransceiver.biz/2018/10/wideband-codan-8528-hf-ssb-transceiver-international-rare-transmit-enable-option/ https://hamradiotransceiver.biz/2018/10/wideband-codan-8528-hf-ssb-transceiver-international-rare-transmit-enable-option/#comments Mon, 15 Oct 2018 21:35:22 +0000 http://hamradiotransceiver.biz/2018/10/wideband-codan-8528-hf-ssb-transceiver-international-rare-transmit-enable-option/ read more]]>

Wideband CODAN 8528 HF SSB Transceiver International RARE Transmit Enable Option

Famous classic wideband CODAN 8528 SSB HF Transceiver – International version / Codan 8528 Land Mobile Export, with RARE factory-enabled TXE Transmit Enable option for direct add / change transmit frequencies by user. USB / LSB mode is unlocked as well. Sale also includes: – cute original CODAN’s Microphone / PTT – printed manual Operator’s Handbook / User’s Guide – spare EEPROM IC. Operates as free-tuning communication receiver with slow and fast band and channel scan modes. Very clean unit with almost no signs of wear, kind of “collectible” grade, comes from the shelf storage. All PCBs are absolutely intact with mounting screws still factory sealed with red paint. EPROM ver 5.60 is factory original with no channels programmed , UV erase window sealed with CODAN’s printed label. See pictures for details. All controls operate smoothly, RX tested OK in “Scan” mode, TX voice and “Call” mode tested OK with simple SWR/Power meter and 50 Ohm load circuit (last picture, not included). Last few pages of the handbook have some imperfections. Wideband land antenna with long cable is also available upon request. In case you have a problem with the item – I’m ready to help you with putting it into operation and/or to share my experience/findings on the item’s use. The item “Wideband CODAN 8528 HF SSB Transceiver International RARE Transmit Enable Option” is in sale since Thursday, January 18, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “robo-tek” and is located in – . This item can be shipped worldwide.

Frequency Band(s): HF
Mono/Multi Band: Multi Band
Model: 8528
MPN: Codan 8528 Land Mobile Export
Brand: CODAN
Type: Mobile/In-Vehicle
Supported Modes: USB

Incoming search terms:

CODAN SSB Transceiver

]]> https://hamradiotransceiver.biz/2018/10/wideband-codan-8528-hf-ssb-transceiver-international-rare-transmit-enable-option/feed/ 0 Elecraft Kx2 Transceiver with ATU option factory assembled https://hamradiotransceiver.biz/2018/10/elecraft-kx2-transceiver-with-atu-option-factory-assembled/ https://hamradiotransceiver.biz/2018/10/elecraft-kx2-transceiver-with-atu-option-factory-assembled/#comments Sun, 14 Oct 2018 20:36:13 +0000 http://hamradiotransceiver.biz/2018/10/elecraft-kx2-transceiver-with-atu-option-factory-assembled/ read more]]>

Elecraft Kx2 Transceiver with ATU option factory assembled

This is a very lightly used KX2 transceiver with built in antenna tuner, and battery pack. This radio was won in a contest but not needed. There are no scratches or marks and it works perfectly. It’s really just like new out of the box. The item “Elecraft Kx2 Transceiver with ATU option factory assembled” is in sale since Thursday, October 11, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “loughkbkevin” and is located in Fort Wayne, Indiana. This item can be shipped to United States.

Brand: Elecraft
Model: KX2-F
MPN: Does Not Apply

]]> https://hamradiotransceiver.biz/2018/10/elecraft-kx2-transceiver-with-atu-option-factory-assembled/feed/ 0