https://hamradiotransceiver.biz Tue, 03 Nov 2026 10:26:47 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2023/12/hackrf-one-r9-v1-7-x-1mhz-6ghz-software-defined-radio-platform-gps-simulator-usa/ https://hamradiotransceiver.biz/2023/12/hackrf-one-r9-v1-7-x-1mhz-6ghz-software-defined-radio-platform-gps-simulator-usa/#comments Sat, 16 Dec 2023 14:21:15 +0000 https://hamradiotransceiver.biz/2023/12/hackrf-one-r9-v1-7-x-1mhz-6ghz-software-defined-radio-platform-gps-simulator-usa/ read more]]>












Upgrades of HackRF One R9 – HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. 1 x HackRF One + shield cover + aluminum alloy shell.

]]> https://hamradiotransceiver.biz/2023/12/hackrf-one-r9-v1-7-x-1mhz-6ghz-software-defined-radio-platform-gps-simulator-usa/feed/ 0 https://hamradiotransceiver.biz/2023/06/hackrf-one-1-6ghz-open-source-software-defined-radio-platform-sdr-board-panus/ https://hamradiotransceiver.biz/2023/06/hackrf-one-1-6ghz-open-source-software-defined-radio-platform-sdr-board-panus/#comments Sun, 11 Jun 2023 15:07:01 +0000 https://hamradiotransceiver.biz/2023/06/hackrf-one-1-6ghz-open-source-software-defined-radio-platform-sdr-board-panus/ read more]]>











HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Board panUS. Description: – HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing transmission of radio signals. You are responsible for using your HackRF One legally. Specifications: – 1MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware Package list: – 1 x HackRF One Software Defined Radio with Aluminium Alloy Shell – 4 x HackRF SMA Antennas (40MHz-6GHz antenna;2.4G/5/5.8G antenna;70MHz-2700MHz antenna;40MHz-860MHz antenna) – 1 x HackRF One special Shield cover(welded on the board) – 1 x HackRF TCXO PPM0.1 GPS Clock module – 1 x LG Micro USB cable. Usually it cost about 35USD-50USD. Thanks for your understanding.

]]> https://hamradiotransceiver.biz/2023/06/hackrf-one-1-6ghz-open-source-software-defined-radio-platform-sdr-board-panus/feed/ 0 https://hamradiotransceiver.biz/2023/04/hackrf-one-1-6ghz-sdr-development-board-transceiver-software-radio-platform-us/ https://hamradiotransceiver.biz/2023/04/hackrf-one-1-6ghz-sdr-development-board-transceiver-software-radio-platform-us/#comments Fri, 21 Apr 2023 09:04:58 +0000 https://hamradiotransceiver.biz/2023/04/hackrf-one-1-6ghz-sdr-development-board-transceiver-software-radio-platform-us/ read more]]>











HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Development Board. Description: – HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing transmission of radio signals. You are responsible for using your HackRF One legally. Specifications: – 1MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware Package list: – 1 x HackRF One Software Defined Radio with Aluminium Alloy Shell – 4 x HackRF SMA Antennas (40MHz-6GHz antenna;2.4G/5/5.8G antenna;70MHz-2700MHz antenna;40MHz-860MHz antenna) – 1 x HackRF One special Shield cover(welded on the board) – 1 x HackRF TCXO PPM0.1 GPS Clock module – 1 x LG Micro USB cable. Usually it cost about 35USD-50USD. Thanks for your understanding. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “thefineshop” and is located in this country: US. This item can be shipped to United States.

• Model: HackRF One
• Type: Base Station
• Frequency: 1MHz-6GHz
• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2023/04/hackrf-one-1-6ghz-sdr-development-board-transceiver-software-radio-platform-us/feed/ 0 https://hamradiotransceiver.biz/2021/12/1mhz-6ghz-hackrf-one-open-source-sdr-platform-board-aluminum-alloy-shell-tps/ https://hamradiotransceiver.biz/2021/12/1mhz-6ghz-hackrf-one-open-source-sdr-platform-board-aluminum-alloy-shell-tps/#comments Sun, 12 Dec 2021 22:51:59 +0000 https://hamradiotransceiver.biz/2021/12/1mhz-6ghz-hackrf-one-open-source-sdr-platform-board-aluminum-alloy-shell-tps/ read more]]>










1MHz-6GHz HackRF One Open Source SDR Platform SDR Development Board + Aluminum Alloy Shell Taking the receiving process as an example, the flow after the signal enters from the antenna is as follows: · The RF switch determines whether to amplify via a 14dB amplifier · High-pass or low-pass filtering of the signal through the image suppression filter · The signal is mixed with RFFC5072 chip to 2.6GHz fixed intermediate frequency ·The latest firmware supports the option of variable IF · Intermediate frequency range 2.150GHz-2.750GHz · The signal is fed into the MAX2837 chip and mixed to the baseband to output a differential IQ signal · The MAX2837 chip can limit the bandwidth of the signal · MAX5864 chip digitizes the baseband signal and sends it to CPLD and single chip TODO FIXME · CPLD ·The LPC4320/4330 processor sends the sampled data to the computer via USB ·Put RFFC5072 and MAX2837 into the shield to protect them, prevent the interference of the outside world and other chips on the board, and try to prevent static electricity from puncturing some chips. Technical Parameters/Main Hardware: Basic Parameters: – Design frequency: 1MHz-6000MHz – Data bandwidth: 20MHz – Sampling accuracy ADC/DAC: 8bit – Sampling rate ADC/DAC: 20Mbps – Data/power supply interface: USB 2.0 – Open source level: all open source (software, hardware) RF Index: – Maximum transmit power: 10dBm (less than the minimum spurious transmit power of radio regulations) – Maximum received power: -5dBm (note: exceeding this value will burn the board) – 64QAM launch EVM: 1.5% – Complex sampling bandwidth: 20MHz Main Hardware: – RFFC5072: mixer provides 80MHz to 4200MHz local oscillator signal – MAX2837: 2.3GHz to 2.7GHz wireless broadband RF transceiver – MAX5864: ADC/DAC, 22MHz sampling accuracy 8bit – LPC4320/4330: For ARM Cortex M4 processor, main frequency 204MHz – Si5351B: I2C programmable arbitrary clock generator for CMOS, provides 40MHz and sampling clock by 800MHz frequency division – MGA-81563: 0.1-6GHz 3v 14dBm amplifier – SKY13317: 20MHz-6.0GHz RF single-pole three-throw (SP3T) switch – SKY13350: 0.01-6.0GHz RF single pole double-throw (SPDT) switch Package Included: – 1 x Set of HackRF One Note: Antenna is not included in the package. Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days. The item “1MHz-6GHz HackRF One Open Source SDR Platform Board + Aluminum Alloy Shell tps” is in sale since Monday, June 15, 2020. This item is in the category “Handys & Kommunikation\Funktechnik\Amateurfunk\Amateurfunk-Sendeempfänger”. The seller is “panda201898″ and is located in Shenzhen. This item can be shipped worldwide.

• Frequenzband: 1MHz-6GHz
• Marke: Markenlos
• Herstellernummer: Nicht zutreffend
• Herstellergarantie: 1 Jahr
• Produktart: HackRF One
• Herstellungsland und -region: China
• Data bandwidth: 20MHz

]]> https://hamradiotransceiver.biz/2021/12/1mhz-6ghz-hackrf-one-open-source-sdr-platform-board-aluminum-alloy-shell-tps/feed/ 0 https://hamradiotransceiver.biz/2020/10/hackrf-one-1-6ghz-open-source-software-defined-radio-platform-sdr-development-us/ https://hamradiotransceiver.biz/2020/10/hackrf-one-1-6ghz-open-source-software-defined-radio-platform-sdr-development-us/#comments Fri, 30 Oct 2020 15:22:50 +0000 http://hamradiotransceiver.biz/2020/10/hackrf-one-1-6ghz-open-source-software-defined-radio-platform-sdr-development-us/ read more]]>










HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Development US. Description: – HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF One has an injection molded plastic enclosure and ships with a micro USB cable. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing transmission of radio signals. You are responsible for using your HackRF One legally. Specifications: – 1MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware Package list: – 1 x HackRF One Software Defined Radio with Aluminium Alloy Shell – 4 x HackRF SMA Antennas (40MHz-6GHz antenna;2.4G/5/5.8G antenna;70MHz-2700MHz antenna;40MHz-860MHz antenna) – 1 x HackRF One special Shield cover(welded on the board) – 1 x HackRF TCXO PPM0.1 GPS Clock module – 1 x LG Micro USB cable. Usually it cost about 35USD-50USD. Thanks for your understanding. The item “HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Development US” is in sale since Thursday, January 9, 2020. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “topskyrc” and is located in California. This item can be shipped to United States.

• Model: HackRF One Software Defined Radio
• MPN: Does Not Apply
• Country/Region of Manufacture: China
• Brand: Unbranded
• Type: HackRF One Software Defined Radio

]]> https://hamradiotransceiver.biz/2020/10/hackrf-one-1-6ghz-open-source-software-defined-radio-platform-sdr-development-us/feed/ 0 https://hamradiotransceiver.biz/2020/02/hackrf-one-1-6ghz-software-defined-radio-platform-sdr-development-board-os12/ https://hamradiotransceiver.biz/2020/02/hackrf-one-1-6ghz-software-defined-radio-platform-sdr-development-board-os12/#comments Sat, 15 Feb 2020 23:01:43 +0000 http://hamradiotransceiver.biz/2020/02/hackrf-one-1-6ghz-software-defined-radio-platform-sdr-development-board-os12/ read more]]>










HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Development Board. Description: – HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF One has an injection molded plastic enclosure and ships with a micro USB cable. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing transmission of radio signals. You are responsible for using your HackRF One legally. Specifications: – 1MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware Package list: – 1 x HackRF One Software Defined Radio with Aluminium Alloy Shell – 4 x HackRF SMA Antennas (40MHz-6GHz antenna;2.4G/5/5.8G antenna;70MHz-2700MHz antenna;40MHz-860MHz antenna) – 1 x HackRF One special Shield cover(welded on the board) – 1 x HackRF TCXO PPM0.1 GPS Clock module – 1 x LG Micro USB cable. If you receive defective item, please kindly notify us within 14 days. The item “HackRF One 1-6GHz Software Defined Radio Platform SDR Development Board os12″ is in sale since Monday, August 26, 2019. This item is in the category “Handys & Kommunikation\Funktechnik\Amateurfunk\Amateurfunk-Sendeempfänger”. The seller is “outstandingdeal” and is located in . This item can be shipped worldwide.

• Marke: Markenlos
• Herstellernummer: nicht zutreffend
• Herstellungsland und -region: China

]]> https://hamradiotransceiver.biz/2020/02/hackrf-one-1-6ghz-software-defined-radio-platform-sdr-development-board-os12/feed/ 0 https://hamradiotransceiver.biz/2020/01/hackrf-one-open-source-software-defined-radio-platform-sdr-development-board-bt/ https://hamradiotransceiver.biz/2020/01/hackrf-one-open-source-software-defined-radio-platform-sdr-development-board-bt/#comments Sat, 04 Jan 2020 21:14:29 +0000 http://hamradiotransceiver.biz/2020/01/hackrf-one-open-source-software-defined-radio-platform-sdr-development-board-bt/ read more]]>










HackRF One 1-6GHz Open Source Software Defined Radio Platform SDR Development Board. Description: – HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF One has an injection molded plastic enclosure and ships with a micro USB cable. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing transmission of radio signals. You are responsible for using your HackRF One legally. Specifications: – 1MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware Package list: – 1 x HackRF One Software Defined Radio with Aluminium Alloy Shell – 4 x HackRF SMA Antennas (40MHz-6GHz antenna;2.4G/5/5.8G antenna;70MHz-2700MHz antenna;40MHz-860MHz antenna) – 1 x HackRF One special Shield cover(welded on the board) – 1 x HackRF TCXO PPM0.1 GPS Clock module – 1 x LG Micro USB cable. Usually it cost about 35USD-50USD. Thanks for your understanding. The item “HackRF One Open Source Software Defined Radio Platform SDR Development Board bt” is in sale since Friday, September 27, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “buyfromtzt” and is located in HK. This item can be shipped worldwide.

• Model: HackRF One
• Country/Region of Manufacture: China
• Type: Ham Radio Transceivers
• MPN: Does Not Apply
• Brand: HackRF One

]]> https://hamradiotransceiver.biz/2020/01/hackrf-one-open-source-software-defined-radio-platform-sdr-development-board-bt/feed/ 0 https://hamradiotransceiver.biz/2019/12/hackrf-one-1-mhz-to-6-ghz-sdr-platform-software-defined-radio-development-board-5/ https://hamradiotransceiver.biz/2019/12/hackrf-one-1-mhz-to-6-ghz-sdr-platform-software-defined-radio-development-board-5/#comments Tue, 17 Dec 2019 11:25:26 +0000 http://hamradiotransceiver.biz/2019/12/hackrf-one-1-mhz-to-6-ghz-sdr-platform-software-defined-radio-development-board-5/ read more]]>








HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. 1 MHz to 6 GHz operating frequency. Up to 20 million samples per second. 8-bit quadrature samples (8-bit I and 8-bit Q). Compatible with GNU Radio, SDR#, and more. Software-configurable RX and TX gain and baseband filter. Software-controlled antenna port power (50 mA at 3.3 V). SMA female antenna connector. SMA female clock input and output for synchronization. Convenient buttons for programming. Internal pin headers for expansion. Hi-Speed USB 2.0. HackRF One 1 MHz – 6 GHz SDR Platform Software Defined Radio Development Board +. +antenna + usb cable +. Customer satisfactory is most important to us. We are always willing to work things out, thank you! Buyers need to return the defective item for the replacement at his own cost. We do our best to serve each and every customer the best we can. The item “HackRF One 1 MHz to 6 GHz SDR Platform Software Defined Radio Development Board” is in sale since Monday, November 4, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “xiaof12″ and is located in , . This item can be shipped worldwide.

• Model: HackRF One
• MPN: Does Not Apply
• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2019/12/hackrf-one-1-mhz-to-6-ghz-sdr-platform-software-defined-radio-development-board-5/feed/ 0 https://hamradiotransceiver.biz/2019/11/hackrf-one-1mhz-6ghz-open-source-software-radio-platform-sdr-development-board/ https://hamradiotransceiver.biz/2019/11/hackrf-one-1mhz-6ghz-open-source-software-radio-platform-sdr-development-board/#comments Sun, 17 Nov 2019 18:50:35 +0000 http://hamradiotransceiver.biz/2019/11/hackrf-one-1mhz-6ghz-open-source-software-radio-platform-sdr-development-board/ read more]]>










You may also like. HackRF One 1MHZ -6GHZ Open-Source Software Radio Platform SDR Development Board. Specification: HackRF One is a fully open source in the SDR equipment, support for WINDOWS, LINUX, Mac, android system, such as the frequency of the support is 1 MHZ – 6 GHZ. HackRF One support software: HDSDR, GNUradio, SDR#, GQRX, SDRRADIO, and so on. Please leave note for your special request e. We only dispatch items to you on Weekday. 3Repair Some items might be broken caused by improper use, we are always happy to offer any helpful repair service. Q: My package was damaged in transit, who do I contact? We take great care in packaging your order, however damage may occur occasionally while in transit. The item “HackRF One 1MHZ 6GHZ Open-Source Software Radio Platform SDR Development Board” is in sale since Wednesday, September 19, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “shuangtai-elec” and is located in Shenzhen. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia.

• Non-Domestic Product: No
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• MPN: Does Not Apply
• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2019/11/hackrf-one-1mhz-6ghz-open-source-software-radio-platform-sdr-development-board/feed/ 0 https://hamradiotransceiver.biz/2019/10/hackrf-one-1mhz-to-6ghz-software-defined-radio-platform-development-board-t9q0/ https://hamradiotransceiver.biz/2019/10/hackrf-one-1mhz-to-6ghz-software-defined-radio-platform-development-board-t9q0/#comments Mon, 21 Oct 2019 17:56:40 +0000 http://hamradiotransceiver.biz/2019/10/hackrf-one-1mhz-to-6ghz-software-defined-radio-platform-development-board-t9q0/ read more]]>











Made of fine quality material, practical, easy to operate and use, wide application range, has a long service life. Features: HackRF One is a software defined radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. Half-duplex transceiver, up to 20 million samples per second, 8-bit quadrature samples (8-bit I and 8-bit Q), compatible with GNU Radio, SDR#, and more. Software-configurable RX and TX gain and baseband filter, software-controlled antenna port power (50 at 3.3 V). SMA female antenna connector, SMA female clock input and output for synchronization. Convenient buttons for programming, internal pin headers for expansion. Hi-Speed USB 2.0, USB-powered. The item “HackRF One 1MHz to 6GHz Software Defined Radio Platform Development Board T9Q0″ is in sale since Thursday, July 25, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “conoshine” and is located in Shen Zhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.

• Brand: Unbranded/Generic
• MPN: Does not Apply
• ASIN: V1UYJWCNUU
• Material: PCB
• Type: 1-5 (optional)
• Frequency band: 1MHz-6GHz
• Data bandwidth: 20MHz
• Sampling accuracy (ADC/DAC): 8BIT
• Sampling speed (ADC/DAC): 20Mbps
• Interface: USB2.0
• Maximum transmitting power: 10dbm
• 64QAM transmitting EVM: 1.5%
• Complex sampling bandwidth: 20MHz
• Mixer RFFC5072: 80MHz-4200MHz
• Wireless bandwidth RF transceiver MAX2837: 2.3GHz-2.7GHz
• Processor LPC4330: main frequency 204MHz
• Amplifier MGA-81563: 0.1-6GHz
• HackRF One board size: 145 * 75mm / 5.7 * 3.0in
• HackRF One board weight: 55g / 1.9ounce
• Type 1: 190 * 110 * 40mm / 7.5 * 4.3 * 1.6in
• Type 2: 300 * 195 * 30mm / 11.8 * 7.7 * 1.2in
• Type 3: 300 * 195 * 40mm / 11.8 * 7.7 * 1.6in
• Type 4: 400 * 300 * 30mm / 15.7 * 11.8 * 1.2in

]]> https://hamradiotransceiver.biz/2019/10/hackrf-one-1mhz-to-6ghz-software-defined-radio-platform-development-board-t9q0/feed/ 0