Ham Radio Transceiver

Ham Radio Transceiver » pluto https://hamradiotransceiver.biz Tue, 21 Apr 2026 23:59:42 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 HamGeek ADI Pluto+ Software Defined Radio AD936x for Libiio SDRsharp Matlab #US https://hamradiotransceiver.biz/2025/12/hamgeek-adi-pluto-software-defined-radio-ad936x-for-libiio-sdrsharp-matlab-us/ https://hamradiotransceiver.biz/2025/12/hamgeek-adi-pluto-software-defined-radio-ad936x-for-libiio-sdrsharp-matlab-us/#comments Wed, 17 Dec 2025 05:06:44 +0000 https://hamradiotransceiver.biz/2025/12/hamgeek-adi-pluto-software-defined-radio-ad936x-for-libiio-sdrsharp-matlab-us/ read more]]>
HamGeek ADI Pluto+ Software Defined Radio AD936x for Libiio SDRsharp Matlab #US

HamGeek ADI Pluto+ Software Defined Radio AD936x for Libiio SDRsharp Matlab #US

Statement: HamGeek ADI Pluto+ is intended for educational, scientific and hobby use only. Please consciously abide by the laws and regulations of your country or region! Features: Using XC7z020-2CLG400I FPGA with 2-core Cortex A9 The AD9363 RFSOC is turned on in AD9361 mode. The frequency range is 70MHz6GHz, and the maximum sampling rate is 61.44MHz 1GB 32bit wide DDR3 1066MHz frequency With 32M QSPI storage, HamGeek ADI Pluto+ supports TF card expansion Supports automatic switching of QSPI boot and TF card boot (insert a TF card for TF card boot; remove the card for QSPI boot) On-board JTAG circuit and USB to serial port. Only one cable is required to supply power and debug Supports USB OTG interface, master and slave. All USB interfaces are TYPE-C interfaces. Supports OTG mode automatic recognition and opens the USB port to supply power VCTCXO is used. The initial frequency accuracy is 0.5PPM, and it supports PPS or 10MHz external disciplined oscillator Gigabit Ethernet interface The design current of all power rails in the digital part is 4A. The current is abundant. AD936x is powered by a ADP1755 high-performance LDO to improve RF performance HamGeek ADI Pluto+ is designed with 10 layers of PCB, impedance matching, and signal integrity The product adopts a CNC shell to strengthen heat dissipation and ensure strength The software interface is libiio. It can be connected to libiio-enabled software such as for iioscope, SDRsharp, Matlab and GNURadio. In addition, you can contact customer service for other signal processing problems Package Included: 1 x Main unit 4 x Antennas 2 x USB cables 1 x Cable adapter 1 x Wrench 1 x Network cable Packaging Details: G. 0.6kg Note: TF card is not included. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
HamGeek ADI Pluto+ Software Defined Radio AD936x for Libiio SDRsharp Matlab #US

]]> https://hamradiotransceiver.biz/2025/12/hamgeek-adi-pluto-software-defined-radio-ad936x-for-libiio-sdrsharp-matlab-us/feed/ 0 SDR Radio PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio USA https://hamradiotransceiver.biz/2025/10/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa-2/ https://hamradiotransceiver.biz/2025/10/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa-2/#comments Wed, 08 Oct 2025 13:23:42 +0000 https://hamradiotransceiver.biz/2025/10/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa-2/ read more]]>

SDR Radio PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio USA

SDR Radio PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio USA received all signal types.

]]> https://hamradiotransceiver.biz/2025/10/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa-2/feed/ 0 SDR Radio PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio USA https://hamradiotransceiver.biz/2025/07/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa/ https://hamradiotransceiver.biz/2025/07/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa/#comments Sun, 20 Jul 2025 16:51:44 +0000 https://hamradiotransceiver.biz/2025/07/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa/ read more]]>
SDR Radio PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio USA

PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio For Gigabit Ethernet Micro SD Card Product Overview: PLUTO+ is a software-defined radio platform that supports 2TX and 2RX, supports Gigabit Ethernet and Micro SD card. It refers to the design for well-known ADI ADALM-PLUTO and improves its shortcomings. Features: – ADC/DAC: AD9363 (Can hack to AD9361 or AD9364) – 2 Transmit, 2 Receiving channel – RF Range: 70MHZ6GHZ – Ref Clock: VCTCXO 40MHZ 0.5ppm – SOC: for Zynq7010 FPGA: 28k – RAM: 512M – FLASH: 32M – USB: 2.0, support OTG – Ethernet: 1000Mb – Micro SD can use to boot – DC IN: 5V±0.5V-2A microUSB Interfaces: Please note that all IO levels are 1.8V. 3.1 When using the official firmware for ADI-PlutoSDR, please connect to URST-MI052. 3.2 When using Pluto+ firmware and need to support Ethernet, please connect URST-MIO46 3.3 When using SD card to boot, please connect SD-H to 1V8 3.4 When using JTAG to debug, please connect JTAG# to GND 3.5 Please connect EXCLK to GND when using external reference clock input PTT Key Port: – PTT drives optocouplers through GPIO0 (MI00), which requires an external relay or control circuit. DFU KEY: – At any time, you can press the DFU button and power on PLUTO+ again to enter the DFU mode, but you need to connect the URST jumper to MI052. Ref CLK input IPEX: – You can connect a cable to input an external high-precision reference clock for AD9363 through the IPEX interface. The main level should not exceed 3.3V, and the EXCLK jumper needs to be connected to GND to turn off the built-in clock Calibrate the Frequency of Built-in VCTCXO: – The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided that you have a reference signal source. Micro-SD: Support booting via SD card, need to connect SD-H jumper to 1V8. Package Included: – 1 x SDR Radio PLUTO+ – 2 x USB Cables. Note: – It is assembled and ready to use. SD card is not included in the package. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
SDR Radio PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio USA

]]> https://hamradiotransceiver.biz/2025/07/sdr-radio-pluto-sdr-transceiver-radio-70mhz-6ghz-software-defined-radio-usa/feed/ 0 70MHz-6GHz Zynq7020+AD9363 SDR Radio Development Board for Pluto SDR https://hamradiotransceiver.biz/2025/05/70mhz-6ghz-zynq7020ad9363-sdr-radio-development-board-for-pluto-sdr/ https://hamradiotransceiver.biz/2025/05/70mhz-6ghz-zynq7020ad9363-sdr-radio-development-board-for-pluto-sdr/#comments Sat, 03 May 2025 21:10:49 +0000 https://hamradiotransceiver.biz/2025/05/70mhz-6ghz-zynq7020ad9363-sdr-radio-development-board-for-pluto-sdr/ read more]]>

70MHz-6GHz Zynq7020+AD9363 SDR Radio Development Board for Pluto SDR

70MHz-6GHz Zynq7020+AD9363 SDR Software Defined Radio Development Board for Pluto SDR Improvements: – Update firmware V0.38, hacked to AD9361, supports 70MHz-6GHz, dual transmitting and receiving, and supports both USB and Ethernet ports. Improved power supply stability. Adding 9363 external input clock interface. Features: – AD9363 chip, replacing AD9361, with frequency range of 70MHz6GHz. Current laboratory tests show that there is not significant differences between these two chips. Board size: about 5 x 8cm – Peripheral: double DDR, 1GB – For N25Q128 FLASH, can be used to start. One channel SD card, can be used to start. Integrated FT2232 debugger, with serial port. PS end USB2.0. PS end gigabit Ethernet port. PL end with crystal oscillator, can drive AD9363 with pure PL. Support external input of local oscillator. Supported Software: – For IIO Oscillscope, SDR Sharp, GNU Radio, MATLAB, and other software that support for libiio. Package Included: – 1 x SDR Development Board – 1 x SD Card. 70MHz-6GHz Zynq7010+AD9363 SDR Software Defined Radio Development Board for Pluto SDR MATLAB Improvements: – Update firmware V0.38, hacked to AD9361, supports 70MHz-6GHz, dual transmitting and receiving, and supports both USB and Ethernet ports. Note: – Please contact our customer service for firmware resources after receiving the product. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
70MHz-6GHz Zynq7020+AD9363 SDR Radio Development Board for Pluto SDR

Incoming search terms:

Liber SDR 7020 Software Radio AD9363 схема
Zynq7020 AD9363 SDR

]]> https://hamradiotransceiver.biz/2025/05/70mhz-6ghz-zynq7020ad9363-sdr-radio-development-board-for-pluto-sdr/feed/ 0 PLUTO+ SDR Transceiver Radio 70MHz-6GHz SDR For Gigabit Ethernet Micro SD Card https://hamradiotransceiver.biz/2024/10/pluto-sdr-transceiver-radio-70mhz-6ghz-sdr-for-gigabit-ethernet-micro-sd-card/ https://hamradiotransceiver.biz/2024/10/pluto-sdr-transceiver-radio-70mhz-6ghz-sdr-for-gigabit-ethernet-micro-sd-card/#comments Fri, 04 Oct 2024 05:32:01 +0000 https://hamradiotransceiver.biz/2024/10/pluto-sdr-transceiver-radio-70mhz-6ghz-sdr-for-gigabit-ethernet-micro-sd-card/ read more]]>

PLUTO+ SDR Transceiver Radio 70MHz-6GHz SDR For Gigabit Ethernet Micro SD Card

PLUTO+ SDR Transceiver Radio 70MHz-6GHz Software Defined Radio For Gigabit Ethernet Micro SD Card Product Overview: PLUTO+ is a software-defined radio platform that supports 2TX and 2RX, supports Gigabit Ethernet and Micro SD card. It refers to the design for well-known ADI ADALM-PLUTO and improves its shortcomings. Features: – ADC/DAC: AD9363 (Can hack to AD9361 or AD9364) – 2 Transmit, 2 Receiving channel – RF Range: 70MHZ6GHZ – Ref Clock: VCTCXO 40MHZ 0.5ppm – SOC: for Zynq7010 FPGA: 28k – RAM: 512M – FLASH: 32M – USB: 2.0, support OTG – Ethernet: 1000Mb – Micro SD can use to boot – DC IN: 5V±0.5V-2A microUSB Interfaces: Please note that all IO levels are 1.8V. 3.1 When using the official firmware for ADI-PlutoSDR, please connect to URST-MI052. 3.2 When using Pluto+ firmware and need to support Ethernet, please connect URST-MIO46 3.3 When using SD card to boot, please connect SD-H to 1V8 3.4 When using JTAG to debug, please connect JTAG# to GND 3.5 Please connect EXCLK to GND when using external reference clock input PTT Key Port: – PTT drives optocouplers through GPIO0 (MI00), which requires an external relay or control circuit. DFU KEY: – At any time, you can press the DFU button and power on PLUTO+ again to enter the DFU mode, but you need to connect the URST jumper to MI052. Ref CLK input IPEX: – You can connect a cable to input an external high-precision reference clock for AD9363 through the IPEX interface. The main level should not exceed 3.3V, and the EXCLK jumper needs to be connected to GND to turn off the built-in clock Calibrate the Frequency of Built-in VCTCXO: – The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided that you have a reference signal source. Micro-SD: Support booting via SD card, need to connect SD-H jumper to 1V8. Package Included: – 1 x SDR Radio PLUTO+ Note: – It is assembled and ready to use. SD card is not included in the package. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
PLUTO+ SDR Transceiver Radio 70MHz-6GHz SDR For Gigabit Ethernet Micro SD Card

]]> https://hamradiotransceiver.biz/2024/10/pluto-sdr-transceiver-radio-70mhz-6ghz-sdr-for-gigabit-ethernet-micro-sd-card/feed/ 0