https://hamradiotransceiver.biz Wed, 29 Apr 2026 01:55:39 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2025/05/xiegu-x6200-hf-transceiver-8w-full-mode-full-band-rf-direct-sampling-2/ https://hamradiotransceiver.biz/2025/05/xiegu-x6200-hf-transceiver-8w-full-mode-full-band-rf-direct-sampling-2/#comments Mon, 05 May 2025 09:13:45 +0000 https://hamradiotransceiver.biz/2025/05/xiegu-x6200-hf-transceiver-8w-full-mode-full-band-rf-direct-sampling-2/ read more]]>




Precision RF Direct Sampling: Transform your communication with our advanced RF Direct Sampling System. Enjoy crystal-clear signal quality across HF/50MHz bands, including WFM/Airband reception, ensuring seamless transmission and reception. It’s perfect for both enthusiasts and professionals to meet all your communication needs. Portable Design: The Xiegu X6200 features a compact frame, a built-in replaceable 3200mAh battery, and substantial interference shielding. It’s your one-stop solution for both desktop and field POTA activities, offering 4-5 hours of operation time on a single charge. Advanced User Interface: The X6200 features a 4-inch high-resolution color screen paired with a sensitive receiver for fine signal analysis, ensuring a superior user experience. From spectrum displays with waterfalls to wide-bandwidth spectral views, every detail is at your fingertips. Automatic Antenna Tuner: The built-in automatic antenna tuner ensures optimal signal reception and transmission, facilitating smooth and efficient communication in any environment.

]]> https://hamradiotransceiver.biz/2025/05/xiegu-x6200-hf-transceiver-8w-full-mode-full-band-rf-direct-sampling-2/feed/ 0 https://hamradiotransceiver.biz/2024/12/xiegu-x6200-hf-transceiver-8w-full-mode-full-band-rf-direct-sampling/ https://hamradiotransceiver.biz/2024/12/xiegu-x6200-hf-transceiver-8w-full-mode-full-band-rf-direct-sampling/#comments Thu, 26 Dec 2024 09:17:47 +0000 https://hamradiotransceiver.biz/2024/12/xiegu-x6200-hf-transceiver-8w-full-mode-full-band-rf-direct-sampling/ read more]]>














A 160-page printed extended manual from Radiod. Ity will be included with your order. — — — Precision RF Direct Sampling: Transform your communication with our advanced RF Direct Sampling System. Enjoy crystal-clear signal quality across HF/50MHz bands, including WFM/Airband reception, ensuring seamless transmission and reception. It’s perfect for both enthusiasts and professionals to meet all your communication needs. Portable Design: The Xiegu X6200 features a compact frame, a built-in replaceable 3200mAh battery, and substantial interference shielding. It’s your one-stop solution for both desktop and field POTA activities, offering 4-5 hours of operation time on a single charge. Advanced User Interface: Featuring a 4-inch high-resolution color screen paired with a sensitive receiver for fine signal analysis, the X6200 ensures a superior user experience. From spectrum displays with waterfalls to wide bandwidth spectral views, every detail is at your fingertips. Automatic Antenna Tuner: The built-in automatic antenna tuner ensures optimal signal reception and transmission, facilitating smooth and efficient communication in any environment. Seamless Connectivity: With an integrated sound card, FT8 decoder, and support for BT/WIFI operations, the Xiegu X6200 offers easy wireless control and connectivity, making setup and operation a breeze. However, an FCC License is required to Transmit (Talk) on Amateur Radio Frequencies in the USA. Discover a new horizon in the world of communications with the Xiegu X6200 HF Transceiver. Engineered with state-of-the-art RF Direct Sampling, this high-frequency transceiver brings a new level of clarity and precision to your contacts. It has a 4-inch color screen, a replaceable battery pack, an automatic antenna tuner, a built-in as well as an external microphone, and a recorder. It also supports various SDR features, such as digital filters, noise reduction, pulse interference elimination, and spectrum/waterfall display. It has two USB interfaces, an ACC interface, a 3.5mmKEY interface, and an S/P interface. It has two external expansion component slots for additional applications and peripherals. Elevate your radio operation experience with the Xiegu X6200 right now! RF Direct Sampling System. Transform RF signals into digital format for unparalleled transmission clarity, revolutionizing communication quality. Integrated with a built-in sound card, FT8 decoder, and support for BT/WIFI operations. Auto-tune for the best signal, removing the hassle of manual adjustments, ensuring unparalleled signal reception and transmission. Comes with a 4-inch high-resolution color screen. The Xiegu X6200 features a compact frame. It’s your one-stop solution for both desktop and field POTA activities. A 3200mAh replaceable battery offers 4-5 hours of operation under light use. Enjoy reliable, continuous communication anywhere. The two handles offer complete protection for the screen from scratches and the knobs from potential impacts while also facilitating easier mobility. Note: The specifications and parameters of the product are subject to the actual sales status. The 80-meter or 3.5 MHz band is a band of radio frequencies allocated for amateur radio use, from 3.5 to 4.0 MHz in IARU Region 2 (consisting mostly of North and South America), and generally 3.5 to 3.8 or 3.9 MHz in Regions 1 and 3 (the rest of the world) respectively. The 40-meter or 7-MHz band is an amateur radio frequency band, spanning 7.000-7.300 MHz in ITU Region 2, and 7.000-7.200 MHz in Regions 1 & 3. About the operating mode color. What’s in that box? 1 x Xiegu X6200 Transceiver (including battery pack) 1 x Type-C Data Cable 1 x Multi-function Microphone 1 x Power Adapter (for charging the removeable battery) 1 x Power cable (for normal operation using a suitable external power supply) 1 x Extended X6200 Manual v1.0.0 (160+ pages). Recommended Accessories (not included in the package). Xiegu XPA125B 100W Power Amplifier & L4001 Cable. Xiegu GNR1 Digital Audio Noise Filter. Xiegu VG4 40m/20m/15m/10m 4-band Vertical Antenna. Radioddity HF-008 6M-80M Portable Antenna & Radioddity M916 Antenna Base. Xiegu GY03 External Stereo Speaker. Radioddity PB3 Carrying Case. Xiegu DH100 100W Portable Power Station. Xiegu X6200 Spare Battery.

]]> https://hamradiotransceiver.biz/2024/12/xiegu-x6200-hf-transceiver-8w-full-mode-full-band-rf-direct-sampling/feed/ 0 https://hamradiotransceiver.biz/2017/06/icom-ic-7300-hf50mhz-direct-sampling-100-watt-transceiver-with-touchscreen-new/ https://hamradiotransceiver.biz/2017/06/icom-ic-7300-hf50mhz-direct-sampling-100-watt-transceiver-with-touchscreen-new/#comments Mon, 19 Jun 2017 12:44:21 +0000 http://hamradiotransceiver.biz/2017/06/icom-ic-7300-hf50mhz-direct-sampling-100-watt-transceiver-with-touchscreen-new/ read more]]>






ICOM IC-7300 HF/6M Direct Sampling Transceiver. New technology is changing the way receivers are being designed and the IC-7300 is an industry first as an RF, Direct Sampling System is being used in an entry level HF radio. The ability to digitize RF before various receiver stages reduces the inherent noise that is generated in the different IF stages of a radio. We feel the performance of the 7300 will far exceed your expectations for a radio considered entry level. RF direct sampling system. The IC-7300 employs an RF direct sampling system, where RF signals are directly convert to digital data. Then processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction as well as reduce noise that can mask weak signals. The new IP+ improves the 3rd order intercept point (IP3) performance improving the ability to copy a weak signal that is adjacent to either a strong interfering signal. In this process, A/D converter is optimized to reduce or eliminate signal distortion. RMDR and phase noise characteristics. The IC-7300s RMDR is about 97dB (typical value) improving the Phase Noise characteristics by about 15dB (at 1 kHz frequency separation). The superior Phase Noise characteristics reduce noise components for both receive and transmit signals. 15 discrete band-pass filters. The RF Direct Sampling is protected by an array of bandpass filters. The signal passes through one of the fifteen bandpass filters, where signals outside the passband are rejected. To reduce the insertion loss, the IC-7300 utilizes High Q factor coils. Large color touch screen. The large 4.3 color TFT touch LCD offers intuitive operation of functions, settings, and various operational visual aids such as the band scope, waterfall function, and audio scope. Like on the high-end rigs, the waterfall shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the spectrum scope. Use the audio scope function to observe various AF TX/RX characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Image below shows the Audio scope with the waterfall function and the oscilloscope. You no longer have to choose whether to listen to the audio or have the spectrum scope sweep for signals as the IC-7300s real-time spectrum scope offers the simultaneous operations found in some of the more expensive rigs! This means you can use either the spectrum scope or the waterfall to quickly move to an intended signal while listening to the receiver audio. The 7300s touch screen introduces a Magnify function. So, when you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune. Spectrum scope specifications Scope system FFT (Fast Fourier Transform) Sweep speed Max. , selectable from slow, mid or fast Span width 5kHz1000kHz Resolution 1 pixel minimum (approximately) Waveform display area (vertical axis) 80dB Reference level adjustment 20dB to +20dB Peak level hold function Max. Hold ON/OFF/last 10 seconds Other functions Averaging indication Touch screen operation VBW (Video Band Width) adjustment. The item “Icom IC-7300 HF/50Mhz Direct Sampling 100 Watt Transceiver with Touchscreen NEW” is in sale since Sunday, June 18, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “bdsl” and is located in Valley Stream, New York. This item can be shipped to United States.

• Type: Base Station
• Model: ICOM IC-7300
• Brand: ICOM
• Frequency Band(s): HF
• MPN: IC-7300
• Supported Modes: AM
• Mono/Multi Band: HF PLUS 50Mhz
• Country/Region of Manufacture: Japan

]]> https://hamradiotransceiver.biz/2017/06/icom-ic-7300-hf50mhz-direct-sampling-100-watt-transceiver-with-touchscreen-new/feed/ 0 https://hamradiotransceiver.biz/2017/02/icom-ic-7300-hf6m-direct-sampling-sdr-touch-screen-transceiver/ https://hamradiotransceiver.biz/2017/02/icom-ic-7300-hf6m-direct-sampling-sdr-touch-screen-transceiver/#comments Sun, 19 Feb 2017 23:39:03 +0000 http://hamradiotransceiver.biz/2017/02/icom-ic-7300-hf6m-direct-sampling-sdr-touch-screen-transceiver/ read more]]>






IC-7300 HF/6M Direct Sampling Transceiver Complete with Original Box Manual and all Accessories Carrying Handle ICOM IC-MB123 with rubber feet installed on sides Excellent Condition, Clean Like New, NO Scratches or Dents. New technology is changing the way receivers are being designed and the IC-7300 is an industry first as an RF, Direct Sampling System is being used in an entry level HF radio. The ability to digitize RF before various receiver stages reduces the inherent noise that is generated in the different IF stages of a radio. We feel the performance of the 7300 will far exceed your expectations for a radio considered entry level. RF direct sampling system. The IC-7300 employs an RF direct sampling system, where RF signals are directly convert to digital data. Then processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction as well as reduce noise that can mask weak signals. The new IP+ improves the 3rd order intercept point (IP3) performance improving the ability to copy a weak signal that is adjacent to either a strong interfering signal. In this process, A/D converter is optimized to reduce or eliminate signal distortion. RMDR and phase noise characteristics. The IC-7300s RMDR is about 97dB (typical value) improving the Phase Noise characteristics by about 15dB (at 1 kHz frequency separation). The superior Phase Noise characteristics reduce noise components for both receive and transmit signals. 15 discrete band-pass filters. The RF Direct Sampling is protected by an array of bandpass filters. The signal passes through one of the fifteen bandpass filters, where signals outside the passband are rejected. To reduce the insertion loss, the IC-7300 utilizes High Q factor coils. Large color touch screen. The large 4.3 color TFT touch LCD offers intuitive operation of functions, settings, and various operational visual aids such as the band scope, waterfall function, and audio scope. Like on the high-end rigs, the waterfall shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the spectrum scope. Use the audio scope function to observe various AF TX/RX characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Image below shows the Audio scope with the waterfall function and the oscilloscope. You no longer have to choose whether to listen to the audio or have the spectrum scope sweep for signals as the IC-7300s real-time spectrum scope offers the simultaneous operations found in some of the more expensive rigs! This means you can use either the spectrum scope or the waterfall to quickly move to an intended signal while listening to the receiver audio. The 7300s touch screen introduces a Magnify function. So, when you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune. Spectrum scope specifications Scope system FFT (Fast Fourier Transform) Sweep speed Max. , selectable from slow, mid or fast Span width 5kHz1000kHz Resolution 1 pixel minimum (approximately) Waveform display area (vertical axis) 80dB Reference level adjustment 20dB to +20dB Peak level hold function Max. Hold ON/OFF/last 10 seconds Other functions Averaging indication Touch screen operation VBW (Video Band Width) adjustment. The item “Icom IC-7300 HF/6M Direct Sampling SDR, Touch Screen Transceiver” is in sale since Sunday, February 19, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “bdsl” and is located in Valley Stream, New York. This item can be shipped to United States.

• Type: Base Station
• Brand: Icom
• Model: 7300
• MPN: IC-7300
• Frequency Band(s): HF
• Supported Modes: AM
• Band Plan: HF + 50 Mhz
• Country/Region of Manufacture: Japan

]]> https://hamradiotransceiver.biz/2017/02/icom-ic-7300-hf6m-direct-sampling-sdr-touch-screen-transceiver/feed/ 0