https://hamradiotransceiver.biz Mon, 27 Apr 2026 01:42:53 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2024/01/hackrf-one-r9-v1-9-1-sdr-radio-portapack-h2m-3-2-lcd-shell-antenna-cable/ https://hamradiotransceiver.biz/2024/01/hackrf-one-r9-v1-9-1-sdr-radio-portapack-h2m-3-2-lcd-shell-antenna-cable/#comments Wed, 17 Jan 2024 05:27:58 +0000 https://hamradiotransceiver.biz/2024/01/hackrf-one-r9-v1-9-1-sdr-radio-portapack-h2m-3-2-lcd-shell-antenna-cable/ read more]]>












Upgrades of HackRF One R9 – HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Hackrf One Specifications It is not compatible with the earlier HackRF Jawbreaker design.

]]> https://hamradiotransceiver.biz/2024/01/hackrf-one-r9-v1-9-1-sdr-radio-portapack-h2m-3-2-lcd-shell-antenna-cable/feed/ 0 https://hamradiotransceiver.biz/2023/11/hackrf-one-r9-v1-8-xupgraded-portapack-h2plastic-shell-assembled5-antennas/ https://hamradiotransceiver.biz/2023/11/hackrf-one-r9-v1-8-xupgraded-portapack-h2plastic-shell-assembled5-antennas/#comments Wed, 01 Nov 2023 18:58:55 +0000 https://hamradiotransceiver.biz/2023/11/hackrf-one-r9-v1-8-xupgraded-portapack-h2plastic-shell-assembled5-antennas/ read more]]>













With a microphone plugged into the audio. It is not compatible with the first HackRF Jawbreaker design. ADS-B reception can be easily enabled on the. With the bias tee enabled you can receive aircraft.

]]> https://hamradiotransceiver.biz/2023/11/hackrf-one-r9-v1-8-xupgraded-portapack-h2plastic-shell-assembled5-antennas/feed/ 0 https://hamradiotransceiver.biz/2021/12/1mhz-6ghz-hackrf-one-open-source-sdr-platform-board-aluminum-alloy-shell-tps/ https://hamradiotransceiver.biz/2021/12/1mhz-6ghz-hackrf-one-open-source-sdr-platform-board-aluminum-alloy-shell-tps/#comments Sun, 12 Dec 2021 22:51:59 +0000 https://hamradiotransceiver.biz/2021/12/1mhz-6ghz-hackrf-one-open-source-sdr-platform-board-aluminum-alloy-shell-tps/ read more]]>










1MHz-6GHz HackRF One Open Source SDR Platform SDR Development Board + Aluminum Alloy Shell Taking the receiving process as an example, the flow after the signal enters from the antenna is as follows: · The RF switch determines whether to amplify via a 14dB amplifier · High-pass or low-pass filtering of the signal through the image suppression filter · The signal is mixed with RFFC5072 chip to 2.6GHz fixed intermediate frequency ·The latest firmware supports the option of variable IF · Intermediate frequency range 2.150GHz-2.750GHz · The signal is fed into the MAX2837 chip and mixed to the baseband to output a differential IQ signal · The MAX2837 chip can limit the bandwidth of the signal · MAX5864 chip digitizes the baseband signal and sends it to CPLD and single chip TODO FIXME · CPLD ·The LPC4320/4330 processor sends the sampled data to the computer via USB ·Put RFFC5072 and MAX2837 into the shield to protect them, prevent the interference of the outside world and other chips on the board, and try to prevent static electricity from puncturing some chips. Technical Parameters/Main Hardware: Basic Parameters: – Design frequency: 1MHz-6000MHz – Data bandwidth: 20MHz – Sampling accuracy ADC/DAC: 8bit – Sampling rate ADC/DAC: 20Mbps – Data/power supply interface: USB 2.0 – Open source level: all open source (software, hardware) RF Index: – Maximum transmit power: 10dBm (less than the minimum spurious transmit power of radio regulations) – Maximum received power: -5dBm (note: exceeding this value will burn the board) – 64QAM launch EVM: 1.5% – Complex sampling bandwidth: 20MHz Main Hardware: – RFFC5072: mixer provides 80MHz to 4200MHz local oscillator signal – MAX2837: 2.3GHz to 2.7GHz wireless broadband RF transceiver – MAX5864: ADC/DAC, 22MHz sampling accuracy 8bit – LPC4320/4330: For ARM Cortex M4 processor, main frequency 204MHz – Si5351B: I2C programmable arbitrary clock generator for CMOS, provides 40MHz and sampling clock by 800MHz frequency division – MGA-81563: 0.1-6GHz 3v 14dBm amplifier – SKY13317: 20MHz-6.0GHz RF single-pole three-throw (SP3T) switch – SKY13350: 0.01-6.0GHz RF single pole double-throw (SPDT) switch Package Included: – 1 x Set of HackRF One Note: Antenna is not included in the package. Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days. The item “1MHz-6GHz HackRF One Open Source SDR Platform Board + Aluminum Alloy Shell tps” is in sale since Monday, June 15, 2020. This item is in the category “Handys & Kommunikation\Funktechnik\Amateurfunk\Amateurfunk-Sendeempfänger”. The seller is “panda201898″ and is located in Shenzhen. This item can be shipped worldwide.

• Frequenzband: 1MHz-6GHz
• Marke: Markenlos
• Herstellernummer: Nicht zutreffend
• Herstellergarantie: 1 Jahr
• Produktart: HackRF One
• Herstellungsland und -region: China
• Data bandwidth: 20MHz

]]> https://hamradiotransceiver.biz/2021/12/1mhz-6ghz-hackrf-one-open-source-sdr-platform-board-aluminum-alloy-shell-tps/feed/ 0 https://hamradiotransceiver.biz/2021/07/hackrf-one-portapack-h2-3-2-inch-lcd-shell-assembled-firmware-installed/ https://hamradiotransceiver.biz/2021/07/hackrf-one-portapack-h2-3-2-inch-lcd-shell-assembled-firmware-installed/#comments Wed, 21 Jul 2021 17:51:27 +0000 http://hamradiotransceiver.biz/2021/07/hackrf-one-portapack-h2-3-2-inch-lcd-shell-assembled-firmware-installed/ read more]]>







HackRF One + PortaPack H2 3.2 inch LCD + Shell Assembled + Firmware Installed. The PortaPack makes the HackRF One software-defined radio portable. It adds an LCD touchscreen, user interface navigation controls, audio output and input, micro SD card slot, 0.5 PPM crystal oscillator, and real-time clock battery backup, Speaker, Li po battery Charger and Center key power on/off function(long press 3-4 sec). The PortaPack firmware provides a user interface and necessary signal processing to do many useful things without a computer. New ABS case, can protect the portapack and hackrf one well. 3.2 inch touch screen. With voice input and output function (ADC, DAC). With TF card slot (store data, playback data, frequency management). Built-in TCXO high-precision clock (0.5ppm), the frequency is as accurate as the walkie-talkie. The new firmware automatically switches the external TCXO (you can see the clock source is external in the menu). Built-in CR1220 battery with RTC clock function (record current time when saving baseband file). Support offline GPS simulation. New Mayhem firmware installed. 1 x HackRF One + PortaPack H2 3.2 inch LCD + Shell Assembled + Firmware Installed. 1 x USB cable. We believe our items are so outstanding. All products are quality checked. We will be happy to resolve any issues you may have in a cordial and friendly manner. The item “HackRF One + PortaPack H2 3.2 inch LCD + Shell Assembled + Firmware Installed” is in sale since Friday, November 6, 2020. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “saymlove” and is located in Shen Zhen. This item can be shipped worldwide.

• Type: Ham Radio Transceiver
• Band Type: Quad Band
• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2021/07/hackrf-one-portapack-h2-3-2-inch-lcd-shell-assembled-firmware-installed/feed/ 0 https://hamradiotransceiver.biz/2021/05/hackrf-one-upgraded-portapack-h2-3-2-lcd-plastic-shell-assembled-usb-cable/ https://hamradiotransceiver.biz/2021/05/hackrf-one-upgraded-portapack-h2-3-2-lcd-plastic-shell-assembled-usb-cable/#comments Fri, 21 May 2021 17:02:04 +0000 http://hamradiotransceiver.biz/2021/05/hackrf-one-upgraded-portapack-h2-3-2-lcd-plastic-shell-assembled-usb-cable/ read more]]>










HackRF One + Upgraded PortaPack H2 3.2 LCD + Plastic Shell Assembled + USB Cable. 1 Antenna Version Package Included. 1 x SDR Radio (Upgraded PortaPack H2+HackRF One). 1 x 40MHz-6GHz Antenna. 1 x USB Cable. 2 Antenna Version Package Included. 1 x SDR Radio (Upgraded PortaPack H2+HackRF One) -1 x 40MHz-6GHz Telescopic Antenna – 700MHz-2700MHz Antenna – 1 x USB Cable. 5 Antenna Version Package Included. 1 x 2.4/5/5.8GHz Antenna. 1 x 35DBi GSM/3G/4G Antenna. 1 x 40MHz-6GHz Telescopic Antenna. 1 x 40MHz-860GHz Antenna. 1 x 700MHz-2700MHz. Note: It is assembled and ready for use. Description: The official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party’Havoc’ firmware is really what you’ll want to use with it since it contains many more decoders and transmit options. Progress of Work: 1. It has completed the program validation prototype. The latest documents in 2017, May are based on improvements. Catching and Replay: – One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy. To create a catching. You just need to enter the “Catching” menu, set the frequency of the remote key, press the red’R’ Record button and then press the key on the remote. Then stop the recording to save it to a SD Card. Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key. Microphone TX: – Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio jack simply hold down the right button to push to talk. If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones Other Transmitters: -There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches. There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage! Receivers: By connecting speakers to the Portapack’s 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled you can receive aircraft. Hardware Configuration: – 3.2-inch TFT240320 screen – Navigation switch – Audio output – Microphone input – DC 2.1 interface – 4-layer gold plate – ROSH process (exported to Europe and America) The latest version is updated with the latest documents in 2017, May. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot, Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). HAVOC Features Include: – IQ file replay – Microphone FM transmit with CTCSS – CTCSS decoder – Frequency manager (save & load from SD card, with categories and notes) – File manager – “Soundboard” wave file player (put 8-bit mono files in SD card /wav directory) – ADS-B receiver with map view – SSTV transmitter – Fully configurable transmit signals – POCSAG transmitter – POCSAG receiver/decoder – Morse transmitter (FM tone and CW) – OOK transmitter for common remote encoders PT2262, doorbells, remote outlets, some garage doors… RDS (Radio Data System) PSN, RadioText and Time groups transmitter – Meteorological radiosonde receiver for M10 and M2K2… AFSK receiver – AFSK transmitter Bell202… Nuoptix DTMF sync transmitter – TouchTunes jukebox universal remote – LCR (Language de Commande Routier) message generator – Street lighting control transmitter (CCIR tones) – “Play Dead” in case of emergency – Fully configurable RF signal generator – RSSI audio output as pitch (for direction finding) Features: – 3.2-inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver. Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days. The item “HackRF One + Upgraded PortaPack H2 3.2 LCD + Plastic Shell Assembled +USB Cable” is in sale since Saturday, October 17, 2020. This item is in the category “Handys & Kommunikation\Funktechnik\Amateurfunk\Amateurfunk-Sendeempfänger”. The seller is “panda201898″ and is located in Shenzhen. This item can be shipped worldwide.

• Besonderheiten: LCD Bildschirm
• Marke: Markenlos
• Modell: SDR Radio
• Herstellernummer: Nicht zutreffend
• Herstellergarantie: 1 Jahr
• Produktart: SDR Radio
• Herstellungsland und -region: China

]]> https://hamradiotransceiver.biz/2021/05/hackrf-one-upgraded-portapack-h2-3-2-lcd-plastic-shell-assembled-usb-cable/feed/ 0 https://hamradiotransceiver.biz/2018/08/hackrf-1-one-rtl-sdr-software-defined-radio-board-1mhz-6ghz-with-cnc-shell-dhl-de/ https://hamradiotransceiver.biz/2018/08/hackrf-1-one-rtl-sdr-software-defined-radio-board-1mhz-6ghz-with-cnc-shell-dhl-de/#comments Thu, 30 Aug 2018 17:01:41 +0000 http://hamradiotransceiver.biz/2018/08/hackrf-1-one-rtl-sdr-software-defined-radio-board-1mhz-6ghz-with-cnc-shell-dhl-de/ read more]]>







HackRF 1 One RTL SDR Software Defined Radio Board 1MHz-6GHz w/ CNC Shell. HackRF 1 One RTL SDR Software Defined Radio Board 1MHz-6GHz w/ CNC Shell Specifications: – 1 MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – Compatible with GNU Radio, SDR#, and more – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware Specifications: – Frequency band: 1MHz-6Ghz – Data bandwidth: 20MHz – Sampling accuracy (ADC/DAC) : 8BIT – Sampling speed (ADC/DAC): 20Mbps – Interface: USB2.0 – Open source – Maximum transmitting power: 10dbm – 64QAM transmitting EVM: 1.5% – Complex sampling bandwidth: 20Mhz Hardware: – Mixer RFFC5072: 80MHz-4200MHz – Wireless bandwidth RF transceiver MAX2837: 2.3Ghz-2.7Ghz – Processor LPC4330: Main frequency 204MHz – Amplifier MGA-81563: 0.1-6Ghz, 3V, 14dbm Package included: – 1 x Main board – 1 x Aluminum alloy Shell – 1 x Antenna (40Mhz-6GHz) – 1 x Data cable – 1 x TCXO clock. The item “HackRF 1 One RTL SDR Software Defined Radio Board 1MHz-6GHz with CNC Shell DHL DE” is in sale since Wednesday, March 8, 2017. This item is in the category “Handys & Kommunikation\Funktechnik\Amateurfunk\Amateurfunk-Sendeempfänger”. The seller is “trustinchina” and is located in Frankfurt. This item can be shipped worldwide.

• Marke: nicht zutreffend
• Herstellernummer: nicht zutreffend
• Brand: Unbranded
• MPN: Does Not Apply

]]> https://hamradiotransceiver.biz/2018/08/hackrf-1-one-rtl-sdr-software-defined-radio-board-1mhz-6ghz-with-cnc-shell-dhl-de/feed/ 0