https://hamradiotransceiver.biz Sun, 26 Jul 2026 07:38:03 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2026/04/vintage-kenwood-ts-440s-amateur-hf-transceiver-sold-as-is-untested/ https://hamradiotransceiver.biz/2026/04/vintage-kenwood-ts-440s-amateur-hf-transceiver-sold-as-is-untested/#comments Wed, 15 Apr 2026 23:47:51 +0000 https://hamradiotransceiver.biz/2026/04/vintage-kenwood-ts-440s-amateur-hf-transceiver-sold-as-is-untested/ read more]]>

















Please view pictures provided for additional detail and to determine the condition of this item. Please feel free to ask any questions and I will answer them asap.

]]> https://hamradiotransceiver.biz/2026/04/vintage-kenwood-ts-440s-amateur-hf-transceiver-sold-as-is-untested/feed/ 0 https://hamradiotransceiver.biz/2026/03/kenwood-th-77a-144440mhz-fm-dual-band-ham-radio-transceiver-sold-as-is-not-test/ https://hamradiotransceiver.biz/2026/03/kenwood-th-77a-144440mhz-fm-dual-band-ham-radio-transceiver-sold-as-is-not-test/#comments Mon, 16 Mar 2026 07:38:35 +0000 https://hamradiotransceiver.biz/2026/03/kenwood-th-77a-144440mhz-fm-dual-band-ham-radio-transceiver-sold-as-is-not-test/ read more]]>








Kenwood TH-77A 144/440MHz FM Dual Band Ham Radio Transceiver Black.

]]> https://hamradiotransceiver.biz/2026/03/kenwood-th-77a-144440mhz-fm-dual-band-ham-radio-transceiver-sold-as-is-not-test/feed/ 0 https://hamradiotransceiver.biz/2025/10/icom-hf-ham-radio-transceiver-sold-as-a-lot-of-2/ https://hamradiotransceiver.biz/2025/10/icom-hf-ham-radio-transceiver-sold-as-a-lot-of-2/#comments Fri, 10 Oct 2025 01:26:44 +0000 https://hamradiotransceiver.biz/2025/10/icom-hf-ham-radio-transceiver-sold-as-a-lot-of-2/ read more]]>











This listing is for a matching pair of UHF ham radios. Complete kit with antena and car battery wire. The Icom F6020 is a professional-grade mobile UHF radio designed for reliable, two-way communication. It is a rugged and durable transceiver suitable for a wide variety of commercial applications. 128 programmable channels organized into 8 zones. Wide (25 kHz) and narrow (12.5 kHz) spacing is selectable. 13.6 V DC (nominal). 22°F to +140°F (-30°C to +60°C). Meets MIL-STD-810 F specifications for ruggedness. 4 watts (typical) output from a front-mounted speaker. Dimensions (W × H × D). 150 × 40 × 117.5 mm (5.91 × 1.57 × 4.63 in). 150 × 40 × 167.5 mm (5.91 × 1.57 × 6.59 in). 0.8 kg (1.75 lb). 1.1 kg (2.4 lb). Built-in 2-Tone, 5-Tone, CTCSS, and DTCS capabilities in analog mode. BIIS 1200 PTT ID transmission. Compatible with MDC 1200 signaling. Power-on password function to prevent unauthorized use. Increases safety for employees working alone. Optional units (UT-109R or UT-110R) can be installed for secure conversations. Six customizable buttons allow users to assign frequently used functions.

]]> https://hamradiotransceiver.biz/2025/10/icom-hf-ham-radio-transceiver-sold-as-a-lot-of-2/feed/ 0 https://hamradiotransceiver.biz/2024/09/kenwood-ts-120s-vintage-ham-radio-hf-ssb-transceiver-dots-sold-for-repair/ https://hamradiotransceiver.biz/2024/09/kenwood-ts-120s-vintage-ham-radio-hf-ssb-transceiver-dots-sold-for-repair/#comments Sun, 08 Sep 2024 19:04:45 +0000 https://hamradiotransceiver.biz/2024/09/kenwood-ts-120s-vintage-ham-radio-hf-ssb-transceiver-dots-sold-for-repair/ read more]]>









This Kenwood TS-120S is in really good cosmetic condition for it’s age with just a few scratches on the sides. While it powers up, we’re only getting dots across the display. Given it’s cosmetic condition, this is an ideal candidate for repair! Please note that a microphone and DC power cable are not included in the sale. The bottom line is this… You’ll receive your item on time and in perfect condition regardless of how big, heavy, or delicate your item may be! WHAT’S INCLUDED IN THE SALE: You will only receive what is shown in the photographs. If you do not see it in the photos, it is likely not included in the sale. That includes manuals, packaging, power cords, etc. ABOUT US: Our company, Ham & HiFi, is located in Sparks, NV. Everyone in the shop is a ham operator and some have been licensed for more than 50 years.

]]> https://hamradiotransceiver.biz/2024/09/kenwood-ts-120s-vintage-ham-radio-hf-ssb-transceiver-dots-sold-for-repair/feed/ 0 https://hamradiotransceiver.biz/2024/02/heathkit-hw-101-vintage-ham-radio-transceiver-needs-work-sold-for-restoration/ https://hamradiotransceiver.biz/2024/02/heathkit-hw-101-vintage-ham-radio-transceiver-needs-work-sold-for-restoration/#comments Tue, 06 Feb 2024 07:43:23 +0000 https://hamradiotransceiver.biz/2024/02/heathkit-hw-101-vintage-ham-radio-transceiver-needs-work-sold-for-restoration/ read more]]>









This Heathkit HW-101 looks pretty good with a nice cabinet and front panel. The radio was putting out only 40 watts or so during our testing, and then it went up in smoke. Please note that a power supply is not included in the sale. The bottom line is this… You’ll receive your item on time and in perfect condition regardless of how big, heavy, or delicate your item may be! WHAT’S INCLUDED IN THE SALE: You will only receive what is shown in the photographs. If you do not see it in the photos, it is likely not included in the sale. That includes manuals, packaging, power cords, etc. ABOUT US: Our company, Ham & HiFi, is located in Sparks, NV. Everyone in the shop is a ham operator and some have been licensed for more than 50 years.

]]> https://hamradiotransceiver.biz/2024/02/heathkit-hw-101-vintage-ham-radio-transceiver-needs-work-sold-for-restoration/feed/ 0 https://hamradiotransceiver.biz/2023/11/why-i-sold-my-yaesu-ft-991a/ https://hamradiotransceiver.biz/2023/11/why-i-sold-my-yaesu-ft-991a/#comments Tue, 28 Nov 2023 22:21:35 +0000 https://hamradiotransceiver.biz/2023/11/why-i-sold-my-yaesu-ft-991a/ read more]]> ]]> https://hamradiotransceiver.biz/2023/11/why-i-sold-my-yaesu-ft-991a/feed/ 0 https://hamradiotransceiver.biz/2022/12/drake-tr7-vintage-ham-radio-transceiver-has-problems-being-sold-for-parts/ https://hamradiotransceiver.biz/2022/12/drake-tr7-vintage-ham-radio-transceiver-has-problems-being-sold-for-parts/#comments Fri, 02 Dec 2022 16:42:25 +0000 https://hamradiotransceiver.biz/2022/12/drake-tr7-vintage-ham-radio-transceiver-has-problems-being-sold-for-parts/ read more]]>












This TR7 isn’t going to win any beauty contests. It’s dirty and missing some trim pieces. It powers up, however we’re not getting any power output and the display goes erratic whenever we try to transmit. We didn’t spend any time attempting to troubleshoot or repair, and no further testing has been done. This should make a good parts unit! Rest assured, you’ll receive your item on time and in excellent condition! But is it worth it? WHAT’S INCLUDED IN THE SALE: You will only receive what is shown in the photographs. If you do not see it in the photos, it is likely not included in the sale. That includes manuals, packaging, power cords, accessories, and so on. ABOUT US: Our company, Ham & HiFi, is located in Sparks, NV. Almost everyone in the shop is a licensed ham operator, some of whom have been licensed for more than 50 years. The owner’s call is KG7LOV (good on QRZ). This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hamandhifi” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South Africa, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion.

• UPC: DoesNotApply
• Model: TR7
• Brand: Drake
• MPN: TR7
• Type: Transceiver
• CompatibleBrand: Universal

]]> https://hamradiotransceiver.biz/2022/12/drake-tr7-vintage-ham-radio-transceiver-has-problems-being-sold-for-parts/feed/ 0 https://hamradiotransceiver.biz/2021/10/ham-amateur-radio-id-o-matic-iv-4-voice-repeater-controller-beacon-125-sold/ https://hamradiotransceiver.biz/2021/10/ham-amateur-radio-id-o-matic-iv-4-voice-repeater-controller-beacon-125-sold/#comments Sun, 10 Oct 2021 22:59:47 +0000 http://hamradiotransceiver.biz/2021/10/ham-amateur-radio-id-o-matic-iv-4-voice-repeater-controller-beacon-125-sold/ read more]]>



Not permitted to give it here, so search for “ID-O-MATIC manual” This listing includes. ID-O-MATIC IV 4 built and tested (not programmed). Includes voice board allowing you to record your own voice! (about 8 seconds max). What connection points do YOU need to find on YOUR two radios or repeater? On the receiver you need COR, RX audio out. On the transmitter you need PTT, TX audio in. If you lack the technical expertise to find these points on your equipment, seek local technical help. THE MOST popular and economical Repeater / Beacon Controller! Radiodan has tested EACH and EVERY built unit in the real world for actual use as a repeater controller. A professional in two-way radio for 45 years and a HAM for over 48 years. Every single one professionally built and tested. See our other listings for options like case, audio ID board, programming, Fan relay board, USB programming cable, etc. See our other listings for cables for select. Motorola radios, TYT TH-9000D radios, Kenwood TKR-720 / 820 or TKR-750 / 850 series repeaters. Includes manual link for your download (always the latest version). ID timer/repeater controller with Morse code output. Keyed CW, audio, and PTT outputs. PTT/audio combination for keying HTs. AMPLIFIED audio mixer for repeater audio and ID. Optional de-emphasis for repeater audio. Super-easy USB port for configuration. Fan control with auto delay (200 ma MAX, fan relay option highly suggested). The big question is: How does the ID-O-Matic IV compare to the ID-O-Matic II and III? The big news — VOICE ID is available as a low-cost option! All IDs are “polite”. Morse code IDs are attenuated if the repeater is in use. Voice IDs are replaced by a Morse ID if someone is talking. And, you can set an optional early ID timer to let the ID-O-Matic IV try to ID when the repeater is idle. A real-time clock lets you synchronize beacons to the clock time, and can even be kept accurate with input from a GPS receiver. “Quiet time” lets you silence beacon transmissions during selected hours (like at night). The circuit board is slightly larger than the -III (3″ x 1.95″ / 7.6cm x 4.95cm) , keeps the same connector locations, and the same mounting hole locations. The DB9 connector and serial port used on the ID-O-Matic II are replaced by a USB mini-B connector. The 10-pin terminal block used on the ID-O-Matic III is replaced with a 12 pin block. The pinouts are similar. There’s a second ground for the audio output, and an added an output to indicate when the ID-O-Matic is sending an ID or a beacon. A dedicated output can switch power to a cooling fan, with user-specified turn-off delay. All I/O signal polarity is set via the setup menu; there are no jumpers to set. The board is better optimized for repeater use, with improved volume control. Receiver audio has enough gain to drive virtually any repeater setup due to the on-board low noise audio amplifier. A protection diode prevents damage to the board if power is connected backwards. Terminal block pins are marked more clearly. The setup menu is vastly improved. As before, no special software is needed — the device shows up as a regular COM serial port (but needs no tricky serial configuration). The new bootloader software enables field upgradeable firmware. You can load new firmware using a very simple process, no special hardware or software needed. Installing new features or bug fixes takes about five minutes. There’s no need for a separate power supply during setup and testing — power can be drawn from the computer’s USB port. Random beacon timing option – great for fox hunts! Many new or enhanced features – and even more to come! The ID-O-Matic IV is a multipurpose, microcontroller based device intended primarily for repeaters, but with other uses as well. It can also be used for beacons, fox hunt transmitters, automatic station ID and many other uses. So what are the more interesting features? There’s a programmable delay timer that announces your call sign or any other message, in Morse code at a speed and audio tone you choose. Then there are the CW keying and PTT outputs so you can attach it to a transmitter, transceiver or repeater. The COR/squelch input can be used to make a repeater controller/IDer that works the way you want it. And how about a new USB interface to connect to your shack computer, laptop or terminal for quick and easy configuration? It’s all there. Using the built-in USB interface, connect the ID-O-Matic IV to a PC (Windows, Mac, or Linux) with a free terminal emulation program such as PuTTY or Minicom and you can use the simple menu to configure the ID-O-Matic IV the way you want it. Just type in your ID message. When the COR input is activated the ID-O-Matic IV will send the message at regular intervals. And now, with the optional add-on voice ID board — record your own voice ID and use that instead of (or in addition to) Morse code! The COR input is used to control when the ID-O-Matic IV sends your programmed Morse code ID. You can use a squelch, COR, PTT or other signals from your equipment according to your needs. The built-in interface circuit and programmable signal polarity let you use either active-high or active-low input signals. You can optionally have the ID-O-Matic send a courtesy beep (or up to three Morse code characters) at the end of each transmission, and you can specify a “hang time” to keep PTT active for a brief period after the input stops. If you want the repeater to ID every so often when it’s idle, there is a beacon timer and a separate message for that too. You can, for example, have the repeater ID with its call sign while being used, and a longer message every hour or two when it’s idle. Or use Morse for the regular ID, and a voice announcement for the beacon. The ID-O-Matic IV has a real-time clock, so you can synchronize the beacon ID to the wall clock if you want. There’s a PTT watchdog timer to keep your repeater from being “hung” by stuck mic buttons or long-winded users. And, you can use the ALT MSG input to send a different ID message (and even change the courtesy beep) based on the state of an input signal – useful if, for example, your site switches to backup power, or if a link is active. Regardless of the mode used, the PTT output is active during the CW ID, with a programmable pre- and post-ID delay. Speed is variable from 5 to 40 words per minute, and the audio pitch for the CW ID and the courtesy beep is also programmable via the setup menu. All outputs are equipped with robust 2N7000 MOSFETs that can handle up to 60V at up to 200 mA to key transmitters or other loads. Improvements have been made to the original ID-O-Matic’s Morse audio output. The -IV boasts a smooth, nearly pure sine wave audio signal rather than the raspy square wave found in some ID circuits. The on-board Morse ID is filtered and fed to a passive audio mixer with volume control. An input is provided for external audio from your receiver or other source; this input has a low noise audio amplifier IC with volume control and is mixed with the Morse audio. There is a de-emphasis filter on the external audio input that can be included or left off at build time, depending on your needs. “Future-Proof” : The heart of the ID-O-Matic IV’s functionality is the firmware program that controls the processor. The controller can be upgraded with new firmware in minutes, without the need to return it for programming, swap chips or even remove it from the repeater (although a few minutes of down time is required). New features are planned for future release, giving you added capabilities at no added cost. The ID-O-Matic IV 4 from Radiodan is completely professionally built and tested. All you need to supply is an enclosure if desired and a source of DC power (unless GM/CDM cables are ordered, then power is taken from the Motorola receiver radio). We get it out the same or next day depending on when you order. The item “Ham Amateur Radio ID-O-Matic IV 4 voice Repeater Controller Beacon 125+ SOLD” is in sale since Sunday, June 15, 2014. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment”. The seller is “radiodan-w7rf” and is located in Fort Collins, Colorado. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Custom Bundle: No
• Compatible Brand: Repeater controller
• Type: amateur radio repeaters
• MPN: IDOM4
• Non-Domestic Product: No
• Country of Manufacture: United States
• Modified Item: No
• Brand: Hamgadgets

]]> https://hamradiotransceiver.biz/2021/10/ham-amateur-radio-id-o-matic-iv-4-voice-repeater-controller-beacon-125-sold/feed/ 0 https://hamradiotransceiver.biz/2019/12/yaesu-ft-857d-hfvhfuhf-transceiver-sold-with-mh-31-mic-12vdc-pwr-cord/ https://hamradiotransceiver.biz/2019/12/yaesu-ft-857d-hfvhfuhf-transceiver-sold-with-mh-31-mic-12vdc-pwr-cord/#comments Wed, 04 Dec 2019 04:34:10 +0000 http://hamradiotransceiver.biz/2019/12/yaesu-ft-857d-hfvhfuhf-transceiver-sold-with-mh-31-mic-12vdc-pwr-cord/ read more]]>













Yaesu FT-857 HF/VHF/UHF Transceiver. With 12VDC Pwr Cord & MH-31 Mic! Condition is pre-owned but in Excellent Condition! Very very clean 857 ultra compact. Tested thoroughly in my Mobile with the ATAS-120 antenna. Great solid signal reports. Comes with 12VDC power cord and genuine Yaesu Munsen MH-31 microphone. Make me an offer. The item “Yaesu FT-857D HF/VHF/UHF Transceiver. Sold with MH-31 Mic, 12VDC Pwr Cord” is in sale since Wednesday, October 2, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “mrbillbass” and is located in Holly Springs, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Taiwan, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Croatia, Barbados, Bermuda, Bolivia, Iceland, Liechtenstein, Sri lanka, Luxembourg, Martinique, Maldives, Nicaragua, Paraguay, Uruguay.

• Model: Yaesu FT-857D
• Band: HF
• Brand: Yaesu
• Type: Mobile/In-Vehicle
• Supported Modes: CW
• MPN: FT-857D

]]> https://hamradiotransceiver.biz/2019/12/yaesu-ft-857d-hfvhfuhf-transceiver-sold-with-mh-31-mic-12vdc-pwr-cord/feed/ 0