https://hamradiotransceiver.biz Wed, 22 Apr 2026 12:00:44 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2026/02/dual-band-222-440-to-28-mhz-8watts-assembled-transverter-vhf-uhf-28mhz/ https://hamradiotransceiver.biz/2026/02/dual-band-222-440-to-28-mhz-8watts-assembled-transverter-vhf-uhf-28mhz/#comments Mon, 16 Feb 2026 07:31:48 +0000 https://hamradiotransceiver.biz/2026/02/dual-band-222-440-to-28-mhz-8watts-assembled-transverter-vhf-uhf-28mhz/ read more]]>










222 MHz + 440 MHz to 28 MHz Dual Band Assembled Mean Power Transverter. Add more bands to your HF radio!! With high frequency stability and extended bands. We have installed a highly stable frequency synthesizer in this model. This allowed us to obtain a long-term stability of 0.2 ppm and to extend the operating range of the transverter 222 – 226 MHz and 440 – 450 MHz with your HF radio frequency 25 – 30 MHz. High frequency stability allows you to work in FM, SSB, CW and even digital modes (FT8, JT65 and etc) with output power 8 watts on 222 and 3.5 watts on 440. It is specially developed for severe conditions of reception – contests, DXing, the neighboring powerful broadcasting and amateur stations. The mixer is made on special HI-frequency. Chip with whopping dynamic range. This transverter includes everything you need to use in conjunction with a HF transceiver with output power of 5-10 watts. Contains the input attenuator and the switch of the bypass on the HF antenna. In the bypass mode, the permissible power is 100 watts. When turning the transverter power on, the HF antenna is turned off and the transverter output is connected. The PTT control of the transverter is automatic with RF power. Due to the automatic switching mode of the attenuator when the RF is applied, even a power of 100 watts, randomly applied to the input, will not be dangerous. Then only set the optimal power of 5-10 watts, and that’s it. For SSB, the transmission is held in speech pauses, and the TX to RX after the HF removal is about 0.5 sec. This transverter is fully assembled and configured in the UR3LMZ laboratory. It has a strong aluminum box. All inscriptions are marked with a modern laser engraving method. The inscriptions are not erased and have a very beautiful appearance. Information about this transverter. 226MHz and 440…450Mhz. DC current is 12V to 14V. Current consumption 3A (TX). LO frequency 222Mhz – 194 MHz and 196 MHz to push F+. LO frequency 440Mhz – 415 MHz and 420 MHz to push F+. LO accuracy at 18C typ +/- 0.1ppm. LO freq stability -20… +70 C +/- 0.2ppm. IF RF input power on 28mhz is 5 to 10Wt. Output power on 222 mhz up to 8 Wt. Output power on 440 mhz up to 5 Wt. Dynamic range IP3 +17dBm typ. Noise figure 1.0dB max 1.5dB on 440 MHz. RF connectors type BNC standart. Size of the transverter 10 x 10 x 4 cm (4 x 4 x 1.6 in). Weight 0,35kg (12 oz). To byu TRANSVERTER on other bands or another model, please, see.

]]> https://hamradiotransceiver.biz/2026/02/dual-band-222-440-to-28-mhz-8watts-assembled-transverter-vhf-uhf-28mhz/feed/ 0 https://hamradiotransceiver.biz/2025/05/yaesu-ftv-250-2-meter-transverter-converter-missing-cord/ https://hamradiotransceiver.biz/2025/05/yaesu-ftv-250-2-meter-transverter-converter-missing-cord/#comments Fri, 02 May 2025 09:07:42 +0000 https://hamradiotransceiver.biz/2025/05/yaesu-ftv-250-2-meter-transverter-converter-missing-cord/ read more]]>




This Yaesu FTV-250 transceiver is a must-have for any amateur radio enthusiast. With its 2-meter frequency, it allows for clear communication over long distances. The device is made by Yaesu, a trusted brand in the radio communication industry, and is modeled after the YAESU FTV-250 design. The transceiver is perfect for those who are looking for a reliable way to communicate during emergencies or natural disasters. It is easy to use and can be set up in a matter of minutes. The device is compact and portable, making it easy to take with you on the go. Note that this item is missing the cord, but it does not affect its functionality.

]]> https://hamradiotransceiver.biz/2025/05/yaesu-ftv-250-2-meter-transverter-converter-missing-cord/feed/ 0 https://hamradiotransceiver.biz/2024/02/kenwood-2m-transverter-model-tv-502/ https://hamradiotransceiver.biz/2024/02/kenwood-2m-transverter-model-tv-502/#comments Wed, 07 Feb 2024 19:58:19 +0000 https://hamradiotransceiver.biz/2024/02/kenwood-2m-transverter-model-tv-502/ read more]]>




Untested Kenwood 2m Transverter Model TV-502. Plugged in and comes on.

]]> https://hamradiotransceiver.biz/2024/02/kenwood-2m-transverter-model-tv-502/feed/ 0 https://hamradiotransceiver.biz/2022/11/144mhz-to-28mhz-assembled-transverter-hd-for-flex-radio-vhf-uhf-15wt-conwerter/ https://hamradiotransceiver.biz/2022/11/144mhz-to-28mhz-assembled-transverter-hd-for-flex-radio-vhf-uhf-15wt-conwerter/#comments Sat, 12 Nov 2022 00:29:31 +0000 https://hamradiotransceiver.biz/2022/11/144mhz-to-28mhz-assembled-transverter-hd-for-flex-radio-vhf-uhf-15wt-conwerter/ read more]]>









High Dynamic Transverter to Flex radios. Up for sale New Generation of UR3LMZ – TR2020 Mini transverter for FLEX radios. We specially designed this transverter for easy connection to Flex radio, SDR and other similar radios. You only need a couple of cables to connect to your radio and you can work on VHF with all kinds of modulation. It is specially developed for severe conditions of reception – contests, DXing, the neighboring powerful broadcasting and amateur stations. The mixer is made on special HI-frequency. With whopping dynamic range. IP3 + 17dBm typ. We made some improvements, improved the circuit, and now the transverter has an output power of 15 watts on VHF. 75 x 85 x 35mm 2.95? 3.35 x 1.35 in. Will allow you to successfully use the transverter in. Near the antenna in a sealed box, in the attic of your home or just on the top shelf. We are offering completely built and tested in UR3LMZ lab assembled transverter that comes with the English description which contains the circuit diagram of this transverter and diagram of how you can connect to your Flex. 1 mW / 0 dBm. Contact closure to ground. +13.8 V DC +12… RX Input chip – ADE. Dynamic range IP3 + 17dBm typ. Dimensions (mm) – 75 x 85 x 35mm 2.95? RF sockets type – SMA. USA, Canada 3 weeks. Africa, South America, Asia, Australia 4-6 weeks. We will try our best to solve the problem for you. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “andreyfan” and is located in this country: UA. This item can be shipped worldwide.

• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2022/11/144mhz-to-28mhz-assembled-transverter-hd-for-flex-radio-vhf-uhf-15wt-conwerter/feed/ 0 https://hamradiotransceiver.biz/2022/09/630-meter-transverter-kit/ https://hamradiotransceiver.biz/2022/09/630-meter-transverter-kit/#comments Sun, 11 Sep 2022 03:56:55 +0000 https://hamradiotransceiver.biz/2022/09/630-meter-transverter-kit/ read more]]>



Brand new open box transverter. 80 meters in at 5 watts will put out 5 watts from 472 – 479 KHZ. Will work with any radio that can be turned down to 5 watts on 80 meter band. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “radiodave15″ and is located in this country: US. This item can be shipped to United States.

• Model: EME223-630M
• Country/Region of Manufacture: Australia
• Type: Transverter
• Supported Modes: AM, CW, FM, SSB
• Frequency Band(s): HF
• Brand: Mini Kits
• Frequency Range: 472 – 479KHZ

]]> https://hamradiotransceiver.biz/2022/09/630-meter-transverter-kit/feed/ 0 https://hamradiotransceiver.biz/2022/05/yaesu-ftv-901r-transverter-with-2m-and-6m-modules/ https://hamradiotransceiver.biz/2022/05/yaesu-ftv-901r-transverter-with-2m-and-6m-modules/#comments Fri, 20 May 2022 12:59:46 +0000 https://hamradiotransceiver.biz/2022/05/yaesu-ftv-901r-transverter-with-2m-and-6m-modules/ read more]]>






Yaesu FTV-901r Transverter With 2m and 6m Modules. I have tried to test this unit, but I was not able to see any power output on 2m. I did not test 6m. I was using the transverter port on my flex radio and had to manually key the ftv-901v with a jumper since it did not come with any cables. I was seeing input power on the meter, but did not see any output. It is in very nice cosmetic condition. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “jdwalk992012″ and is located in this country: US. This item can be shipped to United States.

• Brand: yaesu

]]> https://hamradiotransceiver.biz/2022/05/yaesu-ftv-901r-transverter-with-2m-and-6m-modules/feed/ 0 https://hamradiotransceiver.biz/2021/09/144mhz-432mhz-to-28mhz-for-icom-ic-7300-highly-stable-transverter-vhf-uhf-12w/ https://hamradiotransceiver.biz/2021/09/144mhz-432mhz-to-28mhz-for-icom-ic-7300-highly-stable-transverter-vhf-uhf-12w/#comments Sun, 12 Sep 2021 12:14:59 +0000 http://hamradiotransceiver.biz/2021/09/144mhz-432mhz-to-28mhz-for-icom-ic-7300-highly-stable-transverter-vhf-uhf-12w/ read more]]>











High Dynamic Dualband Transverter to ICOM IC-7300 radio with high frequency stability and extended band. Up for sale New Generation of UR3LMZ – dualband transverter for ICOM IC-7300 radio. We have installed a highly stable frequency synthesizer in this model. High frequency stability allows you to work in FM, SSB, CW and even FT8 PSK. This allowed us to obtain a long-term stability of 0.2 ppm and to extend the operating range of the transverter 144 – 150 MHz and 432 – 438 MHz with your ICOM radio frequency 28 – 32 MHz. It is specially developed for severe conditions of reception – contests, DXing, the neighboring powerful broadcasting and amateur stations. The mixer is made on special HI-frequency. With whopping dynamic range. IP3 + 17dBm typ. We made some improvements, improved the circuit, and now the transverter has an output power of 12 watts on VHF and 5 watts on UHF. We specially designed this transverter for easy connection to ICOM IC-7300 radio. You only need a couple of cables to connect to your radio and you can work on VHF/UHF with all kinds of modulation. Contains the input attenuator and the switch of the bypass on the HF antenna. In the bypass mode , the permissible power is 100 watts. When turning the transverter power on , the HF antenna is turned off and the transverter output is connected. The PTT control of the transverter is automatic with RF power. Due to the automatic switching mode of the attenuator when the RF is applied, even a power of 100 watts , randomly applied to the input, will not be dangerous. Then only set the optimal power of 5-10 watts, and that’s it. For SSB, the transmission is held in speech pauses, and the TX to RX after the HF removal is about 0.5 sec. We are offering completely built and tested in UR3LMZ lab assembled transverter that comes with the English description which contains the circuit diagram of this transverter and diagram of how you can connect to your ICOM IC-7300. 116 MHz and 118 MHz to push F+. LO frequency 432Mhz – 404 MHz and 406 MHz to push F+. +/- 0.2 ppm. 12 W on 144 and 5 W on 432. 1.0 dB on 144 and typ 1.5 dB on 432. +13.8 V DC +12… RX Input chip – ADE. Dynamic range IP3 + 17dBm typ. Dimensions (mm) – 90 x 120 x 45mm (3.55 4.75 x 1.6 in). RF sockets type – BNC. USA, Canada 3 weeks. Africa, South America, Asia, Australia 4-6 weeks. We will try our best to solve the problem for you. The item “144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W” is in sale since Thursday, July 22, 2021. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “andreyfan” and is located in EUROPE. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2021/09/144mhz-432mhz-to-28mhz-for-icom-ic-7300-highly-stable-transverter-vhf-uhf-12w/feed/ 0 https://hamradiotransceiver.biz/2021/08/dual-band-50-70-to-28-mhz-10watts-assembled-transverter-vhf-uhf-28mhz/ https://hamradiotransceiver.biz/2021/08/dual-band-50-70-to-28-mhz-10watts-assembled-transverter-vhf-uhf-28mhz/#comments Fri, 27 Aug 2021 10:58:41 +0000 http://hamradiotransceiver.biz/2021/08/dual-band-50-70-to-28-mhz-10watts-assembled-transverter-vhf-uhf-28mhz/ read more]]>







50 MHz + 70 MHz to 28 MHz Dual Band Assembled Mean Power Transverter. Add more bands to your HF radio!! New Generation of UR3LMZ. Dual Band 50 MHz + 70 MHz transverter with high dynamic range and MEAN POWER – 10Wtts on 50 and 10Wtts on 70 mhz It is specially developed for severe conditions of reception – contests, DXing, the neighboring powerful broadcasting and amateur stations. The mixer is made on special HI-frequency ADE chip with whopping dynamic range IP3 + 17dBm typ. This transverter includes everything you need to use in conjunction with a HF transceiver with output power of 5-10 watts. Contains the input attenuator and the switch of the bypass on the HF antenna. In the bypass mode, the permissible power is 100 watts. When turning the transverter power on, the HF antenna is turned off and the transverter output is connected. The PTT control of the transverter is automatic with RF power. Due to the automatic switching mode of the attenuator when the RF is applied, even a power of 100 watts, randomly applied to the input, will not be dangerous. Then only set the optimal power of 5-10 watts, and that’s it. For SSB, the transmission is held in speech pauses, and the TX to RX after the HF removal is about 0.5 sec. This transverter is fully assembled and configured in the UR3LMZ laboratory. It has a strong aluminum box. All inscriptions are marked with a modern laser engraving method. The inscriptions are not erased and have a very beautiful appearance. Information about this transverter. DC current is 12V to 14V. Current consumption 3A (TX). LO freq is 22MHz and 42MHz. LO freq stability +/- 3ppm. IF RF input power on 28mhz is 5 to 10Wt. Output power on 50 mhz 10Wt. Output power on 70 mhz 10Wt. Dynamic range IP3 +17dBm typ. Noise figure 1.0dB max 1.5dB on 70 MHz. RF connectors type BNC standart. Size of the transverter 10 10 4 cm (4 4 1.6 in). Weight 0,35kg (12 oz). To byu TRANSVERTER on other bands or another model, please, see. The item “Dual Band 50 + 70 to 28 MHz 10Watts ASSEMBLED TRANSVERTER VHF UHF 28mhz” is in sale since Friday, May 4, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hfvhfparts” and is located in EUROPE. This item can be shipped worldwide.

• Country/Region of Manufacture: Ukraine
• Type: Transverter
• Supported Modes: AM
• MPN: Does Not Apply
• Frequency Band(s): HF
• Mono/Multi Band: Dual Band
• Brand: Unbranded/Generic

]]> https://hamradiotransceiver.biz/2021/08/dual-band-50-70-to-28-mhz-10watts-assembled-transverter-vhf-uhf-28mhz/feed/ 0 https://hamradiotransceiver.biz/2021/08/144mhz-432mhz-to-28mhz-for-icom-ic-7610-highly-stable-transverter-vhf-uhf-12w/ https://hamradiotransceiver.biz/2021/08/144mhz-432mhz-to-28mhz-for-icom-ic-7610-highly-stable-transverter-vhf-uhf-12w/#comments Fri, 06 Aug 2021 21:42:07 +0000 http://hamradiotransceiver.biz/2021/08/144mhz-432mhz-to-28mhz-for-icom-ic-7610-highly-stable-transverter-vhf-uhf-12w/ read more]]>











High Dynamic Dualband Transverter to ICOM IC-7610 radio with high frequency stability and extended band. Up for sale New Generation of UR3LMZ – dualband transverter for ICOM IC-7610 radio. We have installed a highly stable frequency synthesizer in this model. High frequency stability allows you to work in FM, SSB, CW and even FT8 PSK. This allowed us to obtain a long-term stability of 0.2 ppm and to extend the operating range of the transverter 144 – 150 MHz and 432 – 438 MHz with your ICOM radio frequency 28 – 32 MHz. We specially designed this transverter for easy connection to ICOM IC-7610 radio. You only need a couple of cables to connect to your radio and you can work on VHF/UHF with all kinds of modulation. It is specially developed for severe conditions of reception – contests, DXing, the neighboring powerful broadcasting and amateur stations. The mixer is made on special HI-frequency. With whopping dynamic range. IP3 + 17dBm typ. We made some improvements, improved the circuit, and now the transverter has an output power of 12 watts on VHF and 5 watts on UHF. We are offering completely built and tested in UR3LMZ lab assembled transverter that comes with the English description which contains the circuit diagram of this transverter and diagram of how you can connect to your ICOM IC-7610. 1 mW / 0 dBm. 116 MHz and 118 MHz to push F+. LO frequency 432Mhz – 404 MHz and 406 MHz to push F+. +/- 0.2 ppm. 12 W on 144 and 5 W on 432. 1.0 dB on 144 and typ 1.5 dB on 432. Contact closure to ground. +13.8 V DC +12… RX Input chip – ADE. Dynamic range IP3 + 17dBm typ. Dimensions (mm) – 90 x 120 x 45mm (3.55 4.75 x 1.6 in). RF sockets type – SMA. USA, Canada 3 weeks. Africa, South America, Asia, Australia 4-6 weeks. We will try our best to solve the problem for you. The item “144mhz + 432mhz to 28mhz for ICOM IC-7610 Highly Stable Transverter VHF UHF 12W” is in sale since Tuesday, February 16, 2021. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “andreyfan” and is located in EUROPE. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Unbranded

]]> https://hamradiotransceiver.biz/2021/08/144mhz-432mhz-to-28mhz-for-icom-ic-7610-highly-stable-transverter-vhf-uhf-12w/feed/ 0 https://hamradiotransceiver.biz/2021/05/transverter-144-mhz-to-28-mhz-hf-vhf-uhf-10w-2-meter-band-ham-radio/ https://hamradiotransceiver.biz/2021/05/transverter-144-mhz-to-28-mhz-hf-vhf-uhf-10w-2-meter-band-ham-radio/#comments Fri, 28 May 2021 06:12:40 +0000 http://hamradiotransceiver.biz/2021/05/transverter-144-mhz-to-28-mhz-hf-vhf-uhf-10w-2-meter-band-ham-radio/ read more]]>






144 to 28 MHz Transverter. Add more bands to your HF radio!! It was developed by the Ukrainian engineer UR3LMZ especially for Ham radio. Many Ham’s around the world use this transverter a board and were convinced of his excellent work. With this transverter you can operate on the 144 mhz band using any type of the HF radio at 28 mhz. It is transverter completely ready to operation, you don’t have need something to solder and to complete. It is easily joined to any transceiver. Just connect this transverter. To the ANT and PTT. Connector on your radio. And then connect HF and VHF antennas. It isn’t necessary to do any switchings!!! Just power on transverter the tumbler on its front panel – you in VHF band. Switch off a transverter – you on HF again. This item very nice working with SDR and FLEX radios with a spectrum Waterfall. Complete with tested and adjusted in laboratory the transverted has the english description which contains the circuit of the transverter. Information about this transverter. DC current is 12V to 14V. Current consumption 2A (TX). LO freq is 116MHz. LO freq stability +/- 3ppm. IF RF input power on 28mhz is 10Wt. TX Output transistor is RD15HVF1. The Output power on 144 mhz is about 10 to 15W. Max power in bypass mode 100Wt (on HF). RX Input transistor is BF998. Noise figure 1.0dB. PTT to the ground. Size of the transverter is 14cm x 5cm x 10cm. To byu full compllete TRANSVERTER KIT. Transverter board, attenuator board, all connectors and etc. After the package left Ukraine you can track it on a tracking system of the Postal service of your country. The item “Transverter 144 mhz to 28 mhz HF VHF UHF 10W 2 meter band ham radio” is in sale since Thursday, March 3, 2016. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hfvhfparts” and is located in EUROPE. This item can be shipped worldwide.

• Country/Region of Manufacture: Ukraine
• Type: Transverter
• Supported Modes: AM
• MPN: Does Not Apply
• Frequency Band(s): VHF
• Brand: Unbranded/Generic

]]> https://hamradiotransceiver.biz/2021/05/transverter-144-mhz-to-28-mhz-hf-vhf-uhf-10w-2-meter-band-ham-radio/feed/ 0