https://hamradiotransceiver.biz Tue, 05 May 2026 02:16:46 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2024/10/hackrf-r9-v2-0-0-upgraded-portapack-h2-plastic-shell5-antennasusb-cable-us/ https://hamradiotransceiver.biz/2024/10/hackrf-r9-v2-0-0-upgraded-portapack-h2-plastic-shell5-antennasusb-cable-us/#comments Mon, 07 Oct 2024 05:41:04 +0000 https://hamradiotransceiver.biz/2024/10/hackrf-r9-v2-0-0-upgraded-portapack-h2-plastic-shell5-antennasusb-cable-us/ read more]]>














HackRF One R9 V2.0.0 + Upgraded PortaPack H2 + Plastic Shell Assembled + 5 Antennas + USB Cable Upgrades of HackRF One R9: MAX2837 is replaced by MAX2839. Si5351C is replaced by Si5351A with additional clock distribution. A series diode is added to the antenna port power supply. The latest firmware is supported, and the current firmware is Mayhem firmware V2.0.0 by default. For certain functionality, like the world map, GPS simulator, and others, you need to prepare a PortaPack H2 and a FAT32 formatted MicroSD card over 1G. Hackrf One Description: – HackRF One is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. Hackrf One Specifications: – 1 MHz to 6 GHz operating frequency – Half-duplex transceiver – Up to 20 million samples per second – 8-bit quadrature samples (8-bit I and 8-bit Q) – For GNU Radio, SDR#, and the like – Software-configurable RX and TX gain and baseband filter – Software-controlled antenna port power (50 mA at 3.3 V) – SMA female antenna connector – SMA female clock input and output for synchronization – Convenient buttons for programming – Internal pin headers for expansion – Hi-Speed USB 2.0 – USB-powered – Open source hardware – HackRF One 1 MHz to 6 GHz SDR platform software defined radio development board Description: The official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party’Havoc’ firmware is really what you’ll want to use with it since it contains many more decoders and transmit options. Progress of Work: 1. It has completed the program validation prototype. The latest documents in 2017, May are based on improvements. Catching and Replay: – One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy. To create a catching. You just need to enter the “Catching” menu, set the frequency of the remote key, press the red’R’ Record button and then press the key on the remote. Then stop the recording to save it to a SD Card. Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key. Microphone TX: – Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio jack simply hold down the right button to push to talk. If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones Other Transmitters: -There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches. There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage! Receivers: By connecting speakers to the Portapack’s 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled you can receive aircraft. Hardware Configuration: – 3.2-inch TFT240320 screen – Navigation switch – Audio output – Microphone input – DC 2.1 interface – 4-layer gold plate – ROSH process (exported to Europe and America) The latest version is updated with the latest documents in 2017, May. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot, Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). HAVOC Features Include: – IQ file replay – Microphone FM transmit with CTCSS – CTCSS decoder – Frequency manager (save & load from SD card, with categories and notes) – File manager – “Soundboard” wave file player (put 8-bit mono files in SD card /wav directory) – ADS-B receiver with map view – SSTV transmitter – Fully configurable transmit signals – POCSAG transmitter – POCSAG receiver/decoder – Morse transmitter (FM tone and CW) – OOK transmitter for common remote encoders PT2262, doorbells, remote outlets, some garage doors… RDS (Radio Data System) PSN, RadioText and Time groups transmitter – Meteorological radiosonde receiver for M10 and M2K2… AFSK receiver – AFSK transmitter Bell202… Nuoptix DTMF sync transmitter – TouchTunes jukebox universal remote – LCR (Language de Commande Routier) message generator – Street lighting control transmitter (CCIR tones) – “Play Dead” in case of emergency – Fully configurable RF signal generator – RSSI audio output as pitch (for direction finding) Features: – 3.2-inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver. Package Included: – 1 x SDR Radio (Upgraded PortaPack H2+HackRF One) -1 x 2.4/5/5.8GHz Antenna – 1 x 35DBi GSM/3G/4G Antenna – 1 x 40MHz-6GHz Telescopic Antenna – 1 x 40MHz-860GHz Antenna – 1 x 700MHz-2700MHz – 1 x USB Cable Note: – It has been assembled and is ready to use. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.

]]> https://hamradiotransceiver.biz/2024/10/hackrf-r9-v2-0-0-upgraded-portapack-h2-plastic-shell5-antennasusb-cable-us/feed/ 0 https://hamradiotransceiver.biz/2024/09/ic-2730e-dual-band-transceiver-vhfuhf-dual-band-mobile-radio-upgraded-version/ https://hamradiotransceiver.biz/2024/09/ic-2730e-dual-band-transceiver-vhfuhf-dual-band-mobile-radio-upgraded-version/#comments Mon, 30 Sep 2024 04:18:02 +0000 https://hamradiotransceiver.biz/2024/09/ic-2730e-dual-band-transceiver-vhfuhf-dual-band-mobile-radio-upgraded-version/ read more]]>












Description: The appearance of IC-2730E has been improved, and it looks more rounded than IC-2720H. Both UHF and VHF frequency bands have increased power to 50W, and a Bluetooth module is optional. Features: – 144/430MHz dual band car mobile radio. Upgraded version of IC-2720H for ICOM. Independent dual channels, support Bluetooth, cross-band relay. VHF/VHF, UHF/UHF Simultaneous Receive. The IC-2730E provides VHF/VHF, UHF/UHF simultaneous receive capability as well as VHF/UHF receive. Main dials, volume, squelch knobs and primal buttons are symmetrically laid out for each band. Optional VS-3 Bluetooth Headset. The optional VS-3 Bluetooth headset can wirelessly control the IC-2730E with three programmable keys and a PTT button. It also provides VOX operation for hands-free communication. Optional UT-133 Bluetooth unit must be installed in the IC-2730E. Easy-to-See Large White Backlit LCD. The display size of IC-2730E is 1.5 times that of IC-2720H, the white backlight supports higher contrast, and the display font is larger and clearer. Easy Controller Mounting with Optional MBF-1. The combination of the optional MBF-1 suction cup mounting base and MBA-5 controller bracket provides easy tilt and swivel adjustments. The large suction cup can be mounted on flat surfaces and can be removed easily. VHF and UHF 50W output power. IC-2730E adopts high-performance power amplifier module to achieve VHF and UHF dual-band 50W output. Built-in 50 CTCSS and 104 DTCS tones with Split Tone Function. The CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. The split tone function allows you to set CTCSS/DTCS tones separately for repeater uplink and downlink on a per channel basis. Controller Attachment to the Main Unit with Optional MBA-4. With the optional MBA-4 combination bracket, the controller can be attached to the main unit. The microphone jacks are mounted on both the controller and main unit. It is easy to connect mic. The IC-2730E covers 118-174 and 375-550MHz. You will be able to listen to aviation, marine, weather channels and other utility communications. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.

]]> https://hamradiotransceiver.biz/2024/09/ic-2730e-dual-band-transceiver-vhfuhf-dual-band-mobile-radio-upgraded-version/feed/ 0 https://hamradiotransceiver.biz/2024/02/3w-5w-usdx-shortwave-qrp-ssbcw-hf-transceiver-all-mode-8-band-upgraded-of-usdx/ https://hamradiotransceiver.biz/2024/02/3w-5w-usdx-shortwave-qrp-ssbcw-hf-transceiver-all-mode-8-band-upgraded-of-usdx/#comments Sun, 25 Feb 2024 21:05:46 +0000 https://hamradiotransceiver.biz/2024/02/3w-5w-usdx-shortwave-qrp-ssbcw-hf-transceiver-all-mode-8-band-upgraded-of-usdx/ read more]]>













Description: This is a shortwave QRP SSB/CW transceiver. Ultra-small size makes it easy to carry for outdoor use. It boasts a 1602N LCD screen and a built-in speaker. It supports connection to a PC and uses FT8, JS8, FT4 and other digital mode software control, and supports CW automatic decoding. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.

]]> https://hamradiotransceiver.biz/2024/02/3w-5w-usdx-shortwave-qrp-ssbcw-hf-transceiver-all-mode-8-band-upgraded-of-usdx/feed/ 0 https://hamradiotransceiver.biz/2022/11/president-richard-radio-fully-setup-upgraded-super-radio/ https://hamradiotransceiver.biz/2022/11/president-richard-radio-fully-setup-upgraded-super-radio/#comments Sat, 05 Nov 2022 22:47:45 +0000 https://hamradiotransceiver.biz/2022/11/president-richard-radio-fully-setup-upgraded-super-radio/ read more]]>








I prep these radios if that’s what you want & its included in the price. Setup of the echo, talkback, modulation, frequency & frequency step. Power levels are checked & set if necessary. Secret engineering menu is used to turn the modulation up. When the radio leaves my bench, it’s finely tuned & all ready to rock! These radios have teriific receive & are all set to sound great on transmit, even with the supplied stock mic, which is a condenser mic (w/up/dwn ch buttons) but is also compatable w/dynamic mics (toggles in the menu). If you want a sideband radio, the one you want is the president lincoln & I have those available also. These 2 radios are the best in the market, imo and are a great value too! President Richard Radio – New – Upgraded – There’s a major shortage of these radios & many others. And Vox (voice activated) works w/any mic. Tuned & aligned well. I also set the echo tricky.. For good sound & the talkback level tricky.. I will also increase the modulation levels to loud & clear! The President Richard 50 Watt Radio may be small in size but is loaded with features such as a front mounted USB charging jack a selectable multi color display a channel changing microphone Roger beep built in Echo and Talkback and much more. The compact case size fits in most cubbies in your Freightliner Cascadia Kenworth Peterbilt or International Truck, or small personal vehicle. Preset Emergency (EMG 1/2). (better said to be “priority” channels & they are “preset” by owner, to whatever is desired). Public Address Capability (PA Capability). 7 Color Multifunction LCD Display. Rotary Switch Channel Selector. It’s an “encoder”. It has a pushbutton menu function w/a lg menu. Manual squelch and ASC. Digital S-meter that is incorrect. It is an analog S meter. Functions like a bass & treble control. On/off & adjustable level (I preset it). Has convenient on/off switch on the front & is fully adjustable via the programming menu. I preset it for good sound. TOT (Time Out Timer). SWR (Power Reading /SWR). When swr is selected via the menu, it gives an automatic reading of the swr, digitally, ie “1.5”, “1.0”, etc. Everytime you push any button, it beeps. This can turn that off. Also switches to PA. Also is switchable to use either an electret condenser mic (the included mic) or standard dynamic mic. USB 5V 2.1A. Right on the front. Included with the President RICHARD. President RICHARD Ham Radio. Ultra Light Electret Microphone With Support. Dimensions: 6.69 in. (W) x 6.29 in. (D) x 2.05 in. Metric Dimensions: 170 mm (W) x 160 mm (D) x 52 mm (H). Weight: ± 2.43 lbs. Antenna Connector Type: SO-239 (UHF Female). Microphone Plug Type: 6-Pin. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “nowurtalkin” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.

• Brand: President
• Type: Ham Radio Transceiver
• Number of Channels: too many
• Band Type: Dual Band
• Color: Multicolor
• Model: Richard
• Band: AM/FM

]]> https://hamradiotransceiver.biz/2022/11/president-richard-radio-fully-setup-upgraded-super-radio/feed/ 0 https://hamradiotransceiver.biz/2022/09/elecraft-k3100-hf6m-transceiver-with-upgraded-synthesizer-atu-6m-preamp/ https://hamradiotransceiver.biz/2022/09/elecraft-k3100-hf6m-transceiver-with-upgraded-synthesizer-atu-6m-preamp/#comments Sun, 18 Sep 2022 16:28:58 +0000 https://hamradiotransceiver.biz/2022/09/elecraft-k3100-hf6m-transceiver-with-upgraded-synthesizer-atu-6m-preamp/ read more]]>











Comes with PR6-6 6m Preamp and cable, original manual, all receipts and notes on upgrades. IF output buffer gain. C101 added to front panel. Filter caps for 8V regulator. Improved pin connectors on PA PCB. KFL3A for 1.8k, 2.1k, 250 Hz. KFL3A for 500 Hz. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “dnormanco” and is located in this country: US. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, Korea, South, South Africa, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Qatar, Croatia, Republic of, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Canada.

• Brand: Elecraft
• Frequency Range: 1.8-54 MHz
• Type: Ham Radio Transceiver
• Color: Black
• Custom Bundle: No
• Model: Elecraft K3/100
• Band: VHF, HF
• Country/Region of Manufacture: United States
• Power: 12V

]]> https://hamradiotransceiver.biz/2022/09/elecraft-k3100-hf6m-transceiver-with-upgraded-synthesizer-atu-6m-preamp/feed/ 0 https://hamradiotransceiver.biz/2021/05/hackrf-one-upgraded-portapack-h2-3-2-lcd-plastic-shell-assembled-usb-cable/ https://hamradiotransceiver.biz/2021/05/hackrf-one-upgraded-portapack-h2-3-2-lcd-plastic-shell-assembled-usb-cable/#comments Fri, 21 May 2021 17:02:04 +0000 http://hamradiotransceiver.biz/2021/05/hackrf-one-upgraded-portapack-h2-3-2-lcd-plastic-shell-assembled-usb-cable/ read more]]>










HackRF One + Upgraded PortaPack H2 3.2 LCD + Plastic Shell Assembled + USB Cable. 1 Antenna Version Package Included. 1 x SDR Radio (Upgraded PortaPack H2+HackRF One). 1 x 40MHz-6GHz Antenna. 1 x USB Cable. 2 Antenna Version Package Included. 1 x SDR Radio (Upgraded PortaPack H2+HackRF One) -1 x 40MHz-6GHz Telescopic Antenna – 700MHz-2700MHz Antenna – 1 x USB Cable. 5 Antenna Version Package Included. 1 x 2.4/5/5.8GHz Antenna. 1 x 35DBi GSM/3G/4G Antenna. 1 x 40MHz-6GHz Telescopic Antenna. 1 x 40MHz-860GHz Antenna. 1 x 700MHz-2700MHz. Note: It is assembled and ready for use. Description: The official firmware created for the PortaPack has several decoders and transmitters built into it, but the third party’Havoc’ firmware is really what you’ll want to use with it since it contains many more decoders and transmit options. Progress of Work: 1. It has completed the program validation prototype. The latest documents in 2017, May are based on improvements. Catching and Replay: – One of the best things about the PortaPack is that it makes catching and replay of wireless signals like those from ISM band remote controls extremely easy. To create a catching. You just need to enter the “Catching” menu, set the frequency of the remote key, press the red’R’ Record button and then press the key on the remote. Then stop the recording to save it to a SD Card. Now you can go into the Replay menu, select the file that you just recorded and hit play. The exact same signal will be transmitted over the air, effectively replacing your remote key. Microphone TX: – Using the 3.5mm audio jack the Portapack can also be used as a standard Push to Talk or voice activated walkie talkie radio. With a microphone plugged into the audio jack simply hold down the right button to push to talk. If required you can also enable multiple CTCSS tone options, as well as tones that look like they enable transmission to wireless headphones Other Transmitters: -There are generic OOK transmitter which can be programmed with custom data. This mode might be useful for experimenting with simple key fobs, or things like home, automation switches. There are numerous transmit modes implemented that are questionable in most countries and could get you into huge trouble. These transmitters are purely to be used for internal testing with a faraday cage! Receivers: By connecting speakers to the Portapack’s 3.5mm audio jack you can easily listen in on standard NFM and WFM audio signals. ADS-B reception can be easily enabled on the PortaPack by selecting the inductor and lightning symbol on the top right. With the bias tee enabled you can receive aircraft. Hardware Configuration: – 3.2-inch TFT240320 screen – Navigation switch – Audio output – Microphone input – DC 2.1 interface – 4-layer gold plate – ROSH process (exported to Europe and America) The latest version is updated with the latest documents in 2017, May. Add a PortaPack to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot, Just add a USB battery, and you’re ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware). HAVOC Features Include: – IQ file replay – Microphone FM transmit with CTCSS – CTCSS decoder – Frequency manager (save & load from SD card, with categories and notes) – File manager – “Soundboard” wave file player (put 8-bit mono files in SD card /wav directory) – ADS-B receiver with map view – SSTV transmitter – Fully configurable transmit signals – POCSAG transmitter – POCSAG receiver/decoder – Morse transmitter (FM tone and CW) – OOK transmitter for common remote encoders PT2262, doorbells, remote outlets, some garage doors… RDS (Radio Data System) PSN, RadioText and Time groups transmitter – Meteorological radiosonde receiver for M10 and M2K2… AFSK receiver – AFSK transmitter Bell202… Nuoptix DTMF sync transmitter – TouchTunes jukebox universal remote – LCR (Language de Commande Routier) message generator – Street lighting control transmitter (CCIR tones) – “Play Dead” in case of emergency – Fully configurable RF signal generator – RSSI audio output as pitch (for direction finding) Features: – 3.2-inch, 240 x 320 RGB LCD with resistive touch panel. Four-way arrow keys, rotary jog wheel, and select button. Coin battery for preserving settings and date/time. Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). HackRF mode runs HackRF firmware for use with host computer SDR software. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting! Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into “HackRF Mode”. PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems. PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio. The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver. Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days. The item “HackRF One + Upgraded PortaPack H2 3.2 LCD + Plastic Shell Assembled +USB Cable” is in sale since Saturday, October 17, 2020. This item is in the category “Handys & Kommunikation\Funktechnik\Amateurfunk\Amateurfunk-Sendeempfänger”. The seller is “panda201898″ and is located in Shenzhen. This item can be shipped worldwide.

• Besonderheiten: LCD Bildschirm
• Marke: Markenlos
• Modell: SDR Radio
• Herstellernummer: Nicht zutreffend
• Herstellergarantie: 1 Jahr
• Produktart: SDR Radio
• Herstellungsland und -region: China

]]> https://hamradiotransceiver.biz/2021/05/hackrf-one-upgraded-portapack-h2-3-2-lcd-plastic-shell-assembled-usb-cable/feed/ 0 https://hamradiotransceiver.biz/2019/05/baofeng-uv-8r-upgraded-uv-5r-8-watt-ham-radio-transceiver-walkie-talkies-dual-band/ https://hamradiotransceiver.biz/2019/05/baofeng-uv-8r-upgraded-uv-5r-8-watt-ham-radio-transceiver-walkie-talkies-dual-band/#comments Sat, 01 Jun 2019 00:11:17 +0000 http://hamradiotransceiver.biz/2019/05/baofeng-uv-8r-upgraded-uv-5r-8-watt-ham-radio-transceiver-walkie-talkies-dual-band/ read more]]> ]]> https://hamradiotransceiver.biz/2019/05/baofeng-uv-8r-upgraded-uv-5r-8-watt-ham-radio-transceiver-walkie-talkies-dual-band/feed/ 0 https://hamradiotransceiver.biz/2017/11/elecraft-k3100-upgraded-to-k3s-hf6-transceiver-with-p3-panadapter/ https://hamradiotransceiver.biz/2017/11/elecraft-k3100-upgraded-to-k3s-hf6-transceiver-with-p3-panadapter/#comments Fri, 24 Nov 2017 22:36:51 +0000 http://hamradiotransceiver.biz/2017/11/elecraft-k3100-upgraded-to-k3s-hf6-transceiver-with-p3-panadapter/ read more]]>













Excellent condition K3 and P3 pan-adapter. The performance of the improved VFO upgrade makes a remarkable radio even better. Please do not ask to split up. Has 100 Watt PA, Ant Tuner, 5 filters, Upgrade, TXCO. 5ppm, general coverage receive and the P3 with a brilliant display. Elecraft K3(s) SN: 4937. K3/100-watt (upgraded to K3S synth). KSYN3AUPG Synthesizer Upgrade for K3. KAT3A 100watt ant tuner. KFL3A-1.8kHz 1.8kHz. KFL3A-2.7kHz stock roofing filter. P3 Panadapter for K3, K3S, and other rigs. You will not be disappointed with this setup. Unit comes completer with cables, manuals and fully operational as check out and upgrade by elecraft a 18 months ago. Thanks for looking. My FRN database shows Roswell, GA my old QTH. We moved to FL two months ago and I just updated my FRN so that QRZ and other address databases will match. Manuals will be in each box as well as the respective power cable, hookup for P3, the USB-Serial adapter and 9 Pin serial cable and power cables. Thanks for Looking. The item “ELECRAFT K3/100 (upgraded to K3s) HF/6 TRANSCEIVER WITH P3 PANADAPTER” is in sale since Monday, November 20, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “k3go” and is located in Saint Augustine, Florida. This item can be shipped to United States.

• Brand: Elecraft
• Frequency Band(s): HF
• Supported Modes: AM
• Model: K3 (s upgrade)

]]> https://hamradiotransceiver.biz/2017/11/elecraft-k3100-upgraded-to-k3s-hf6-transceiver-with-p3-panadapter/feed/ 0 https://hamradiotransceiver.biz/2017/10/general-lee-10-meter-radio-pro-tuned-aligned-upgraded-schottky-receiver/ https://hamradiotransceiver.biz/2017/10/general-lee-10-meter-radio-pro-tuned-aligned-upgraded-schottky-receiver/#comments Thu, 12 Oct 2017 18:43:12 +0000 http://hamradiotransceiver.biz/2017/10/general-lee-10-meter-radio-pro-tuned-aligned-upgraded-schottky-receiver/ read more]]>



Factory Talkback, Echo & Reverb, DIMMER and High/Low output. THAT GREAT BIG GENERAL LEE SOUND!!! SUPER TUNED, ALIGNED AND UPGRADE SCHOTTKY RECEIVER SECTION!! Controls: Volume, squelch, mike gain, RF gain, echo & REVERB controls. RANGER SRA 198 NOISE CANCELING MIC. BRACKET, SIDE SCREWS, POWER CORD, MIC HANGER. W8″ X L10″ X H2. EFFINGHAM RADIO IS A FULL TIME, FULL SERVICE RADIO REPAIR AND SALES SHOP LOCATED IN EFFINGHAM ILLINOIS! WE ARE LOCATED INSIDE THE PETRO STOPPING CENTER AT I/57 AND I/70 EXIT 159 IN ILLINOIS. WE HAVE OVER 20 YEARS EXPERIENCE. WE USE B&K OSCILLOSCOPES, B&K 2040 SIGNAL GENERATORS AND B&K 1040 CB SERVICE MASTERS. OUR RADIOS GO THRU A RIGOROUS ONE OF A KIND 15 STEP ALIGNMENT AND ARE SUPER TUNED. PER THE MANUFACTURERS SERVICE MANUAL FOR OPTIMUM TRANSMIT PERFORMANCE AND VERY LOUD. CLEAR AUDIO ALONG WITH SUPERIOR RECEIVE PERFORMANCE ON ALL FREQUENCY’S AND BANDS! JUST CHECK OUR FEEDBACK FOR OUR CUSTOMERS REACTIONS. ALL METERS ARE ALIGNED FOR ACCURATE READING! IN ADDITION WE HAVE UPGRADED Certain stock diodes within the receive circuitry using higher quality. Schottky barrier diodes whose faster switching results in HIGHER PERFORMANCE and an overall quieter receive. WE ARE ONE OF THE LARGEST SHOPS IN THE COUNTRY. The item “GENERAL LEE 10 METER RADIO PRO TUNED, ALIGNED, UPGRADED SCHOTTKY RECEIVER” is in sale since Wednesday, June 24, 2015. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “effinghamradiorepair” and is located in Effingham, Illinois. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Qatar, Croatia, Colombia.

• Type: Mobile/In-Vehicle
• Brand: general lee
• Model: general lee
• Supported Modes: AM
• MPN: general lee

]]> https://hamradiotransceiver.biz/2017/10/general-lee-10-meter-radio-pro-tuned-aligned-upgraded-schottky-receiver/feed/ 0 https://hamradiotransceiver.biz/2017/04/mint-elecraft-k3-100-watt-160-6-meter-tranceiver-upgraded-2/ https://hamradiotransceiver.biz/2017/04/mint-elecraft-k3-100-watt-160-6-meter-tranceiver-upgraded-2/#comments Wed, 05 Apr 2017 04:53:54 +0000 http://hamradiotransceiver.biz/2017/04/mint-elecraft-k3-100-watt-160-6-meter-tranceiver-upgraded-2/ read more]]>









So nice it looks unused. Upgrades: KAT3-F K3 Internal ATU (Automatic Antenna Tuner) KBPF3 K3 General Coverage RX Moule KFL3A-500 K3 500Hz Pole Filter MH2 Handset. If you have any questions or requests, please contact me through Facebook at facebook. Com/TavernTrove. – – – “Like” us! Tell me what you collect!! I have many tough beer items up for sale right now! Box 80191 Raleigh, NC 27623. The item “MINT Elecraft K3 100 Watt 160-6 Meter Tranceiver Upgraded” is in sale since Tuesday, April 04, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “taverntrove” and is located in Raleigh, North Carolina. This item can be shipped worldwide.

]]> https://hamradiotransceiver.biz/2017/04/mint-elecraft-k3-100-watt-160-6-meter-tranceiver-upgraded-2/feed/ 0