https://hamradiotransceiver.biz Sun, 19 Jul 2026 07:14:54 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://hamradiotransceiver.biz/2024/01/elecraft-kx3-factory-built-160-6m-10w-qrp-transceiver-withatu-batt-chrg-extras/ https://hamradiotransceiver.biz/2024/01/elecraft-kx3-factory-built-160-6m-10w-qrp-transceiver-withatu-batt-chrg-extras/#comments Sun, 28 Jan 2024 18:26:46 +0000 https://hamradiotransceiver.biz/2024/01/elecraft-kx3-factory-built-160-6m-10w-qrp-transceiver-withatu-batt-chrg-extras/ read more]]>













Experience the power and precision of the Elecraft KX3 Ham Radio Transceiver. Elecraft KX3 Transceiver 160m – 6m coverage, All-mode. This unit was factory assembled. High-performance 32-bit floating-point DSP.

]]> https://hamradiotransceiver.biz/2024/01/elecraft-kx3-factory-built-160-6m-10w-qrp-transceiver-withatu-batt-chrg-extras/feed/ 0 https://hamradiotransceiver.biz/2021/06/hf-vertical-antenna-160-6m-broadband-2-54mhz-400w-ssb-multiband-multimode-ham/ https://hamradiotransceiver.biz/2021/06/hf-vertical-antenna-160-6m-broadband-2-54mhz-400w-ssb-multiband-multimode-ham/#comments Sat, 12 Jun 2021 22:08:42 +0000 http://hamradiotransceiver.biz/2021/06/hf-vertical-antenna-160-6m-broadband-2-54mhz-400w-ssb-multiband-multimode-ham/ read more]]>












For All Band 160m – 6m. Effectiveness is on 80m – 6m. HF Broadband Vertical Base Antenna Multiband 6/10/12/15/17/20/30/40/80/160. Brand New HF Broadband Vertical Antenna 6/10/12/15/17/20/30/40/80/160 Meters This Antenna is a Vertical Broadband Antenna. It does not require any radials. This is good for limited space it does Many Frequency with the ATU , that is build in many Transceiver in the market. It Does Max 400 Watt TECHNICAL SPECIFICATIONS Antenna type : HF Broadband Vertical Frequency range : 1.8 – 57 MHz optimum > 3.5 Mhz , for below 3,5Mhz you may need to increase the lenght with Wires , Put extra wire support for lower Frequency Impedance : 50 Ohms Connectors : SO-239. Giant Communication is a Company that Deliver all RF Equipment. We Design and Manufacture FM Transmitter , TV Transmitter, Power Amplifier RF. Antenna System for HF, VHF, UHF. We also build any kind of Antenna system for HF , VHF , UHF , Yagis, Dipole, Log Periodic, Vertical. Please Ask for any Specification that you want. We took picture from our original Stock, for units that we don’t manufacture, sometime we take it from the. And Serial Number might be different. Dispatch of goods will be arranged through us. The item “HF VERTICAL ANTENNA 160-6m BROADBAND 2-54Mhz 400W SSB MultiBand MultiMode HAM” is in sale since Wednesday, December 2, 2020. This item is in the category “Consumer Electronics\Radio Communication\Other Radio Communication”. The seller is “broadcastsupply” and is located in Bless The World. This item can be shipped worldwide.

• To Fit: CB Radio
• Compatible Brand: Universal
• Type: Antenna
• MPN: GCOM DIPOLE 88-108
• Brand: GCOM

]]> https://hamradiotransceiver.biz/2021/06/hf-vertical-antenna-160-6m-broadband-2-54mhz-400w-ssb-multiband-multimode-ham/feed/ 0 https://hamradiotransceiver.biz/2018/03/new-elecraft-kx3-f-160-6m-transceiver-2/ https://hamradiotransceiver.biz/2018/03/new-elecraft-kx3-f-160-6m-transceiver-2/#comments Sat, 24 Mar 2018 10:39:39 +0000 http://hamradiotransceiver.biz/2018/03/new-elecraft-kx3-f-160-6m-transceiver-2/ read more]]>







NEW Elecraft KX3-F 160-6M Transceiver, Factory Assembled. From what I gather the original owner never took it out of the original packaging and donated it for a good cause. The radio appears to be in MINT condition with all the original packaging. KX3-F – KX3 160-6M Transceiver, Factory Assembled. KXBC3 – Internal NiMH Charger with Real-Time Clock for KX3 (add-in module). KX3 Accessory Cable Set. Hand Microphone for KX3. This is great a little QRP radio with world-class performance. , including the KXPA100 to bring it up to a full 100-watt output. Please let me know if you have any questions or need additional information. The item “New Elecraft KX3-F 160-6M Transceiver” is in sale since Tuesday, March 20, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “ssamjung2″ and is located in Frisco, Texas. This item can be shipped to United States.

• Type: Portable/Handheld
• Brand: Elecraft
• Model: KX3
• Frequency Band(s): 6m
• Supported Modes: AM

]]> https://hamradiotransceiver.biz/2018/03/new-elecraft-kx3-f-160-6m-transceiver-2/feed/ 0 https://hamradiotransceiver.biz/2018/03/new-elecraft-kx3-f-160-6m-transceiver/ https://hamradiotransceiver.biz/2018/03/new-elecraft-kx3-f-160-6m-transceiver/#comments Thu, 15 Mar 2018 09:21:00 +0000 http://hamradiotransceiver.biz/2018/03/new-elecraft-kx3-f-160-6m-transceiver/ read more]]>







NEW Elecraft KX3-F 160-6M Transceiver, Factory Assembled. From what I gather the original owner never took it out of the original packaging and donated it for a good cause. The radio appears to be in MINT condition with all the original packaging. KX3-F – KX3 160-6M Transceiver, Factory Assembled. KXBC3 – Internal NiMH Charger with Real-Time Clock for KX3 (add-in module). KX3 Accessory Cable Set. Hand Microphone for KX3. This is great a little QRP radio with world-class performance. , including the KXPA100 to bring it up to a full 100-watt output. Please let me know if you have any questions or need additional information. 10 W PEP (100 W with KXPA100 amp). Only 1.5 pounds (0.7 kg). Current drain as low as 150 mA. Internal options include wide-range ATU, battery charger, 2-meter module; built-in speaker. Advanced DSP provides dual watch, noise reduction, noise blanking, autonotch, stereo audio effects. Software-defined radio (SDR) architecture plus optional roofing filters for excellent dynamic range. Operates in data modes (PSK31/RTTY) with or without a PC; includes RX I/Q soundcard output. The revolutionary Elecraft KX3 puts the world in the palm of your hand! Despite its small size, it covers all amateur bands from 160-6 meters, operates in all modes, and has DSP-based features usually found only on larger radios. The KX3’s unique form-factor allows you to operate from anywhere. Fold out the rear tilt-feet for use on a desktop or picnic table. For extreme portability, you can add the internal wide-range ATU, 8-AA cell battery pack with NiMH charger, and adjustable KXPD3 keyer paddle. With a whip antenna, you can even operate hand-held. In receive mode, current drain can be as low as 150 mA – about one-half to one-third that of competing all-band portables. Transmit efficiency is also excellent, further improving battery life. Full-Featured, yet Easy to Use. The KX3 features a large front panel with all controls optimized for convenient use. You won’t have to dig through menus to set the power level, adjust the keyer speed, or change filter settings. And the KX3 has the same full-size display as the Elecraft K3, so all operating information is available at a glance. The KX3’s tutorial-style manual explains how and why controls are used, so new hams will be experts in no time. KXPA100 External 100-Watt Amplifier. Our high-performance KXPA100 home/mobile amplifier seamlessly integrates with the KX3 as well as other popular 5- to 10-W transceivers. It has its own internal ATU option (KXAT100) with dual antenna jacks. 160 – 6 meter ham bands; general coverage receive from 1.5 – 32.0 MHz (also covers 0.31 – 1.5 MHz with reduced sensitivity). Ultra-compact size: 3.4″H x 7.4″W x 1.7D; 18 oz. Rear tilt feet fold up for transport. Custom high-contrast LCD with alphanumeric text display. Internal 8 – AA battery holder. Current drain as low as 150 mA in receive mode. High-performance 32-bit floating-point DSP. Built-in PSK/TTY decode/encode allows data mode operation without a PC; transmit in data modes using CW keyer paddle. Low-noise synthesizer with 1-Hz tuning resolution. Firmware updateable via provided application software. Quadrature down-sampling mixer compatible with PC-based SDR (software defined radio) applications. Receiver I/Q outputs for use with PC soundcard. Dual roofing filter option for enhanced dynamic range. (500/1500 Hz analog filters; effective IF b/w of 1000/3000 Hz). Switchable preamp and attenuator. 8-band receive audio equalizer. Dual watch over +/- 15 kHz range; uses applicable roofing filter. Easy-to-use PassBand Tuning (PBT) for shift/width/hicut/locut; roofing filters automatically track DSP filter settings. Automatic and manual notch filtering; adjustable noise reduction and noise blanking; binaural audio effects for enhanced receive. Center-tuning indicator for CW and data modes. Built-in speaker; stereo jack for headphones/external speakers. Adjustable output, 0.1 to 10 W (8 W 12, 10 & 6 M). (100 W with KXPA100 amp). Rugged, SWR and temperature-protected final amplifier stage. Optional MH3 microphone with PTT and UP/DOWN functions. Optional attached keyer paddle with spacing adjustment. Switchable PA output impedance for efficient 5-W or 10-W use. Fast, silent, PIN-diode T-R switching – no relays. DSP RF speech processing for excellent’punch. 8 band equalizer tailors passband to your voice and microphone. Built in digital voice recorder (DVR) with two message buffers. Internal CW keyer with 8-50 WPM range. Six CW/DATA message memories. 100 general-purpose memories store VFOs, modes, etc. Computer control via supplied USB cable or optional RS-232 cables. Full remote-control command set works with most amateur radio software applications (emulates Elecraft K3). Tutorial-style manual ideal for new hams. KXFL3 Roofing Dual Bandwidth Filter for SSB/CW/DATA. KXAT3 Internal, Wide-Range 20-W Automatic Antenna Tuner. (8 – AA NiMH batteries not supplied with KX3; non-rechargeables can also be used in KX3 internal battery holder). KX3-2M Internal 2-Meter Module. H3 Hand Microphone with UP/DN Controls. KXPD3 Attached Precision Keyer Paddle. KXPA100 High-Performance 160-6 meter, External 100-W Amplifier. Also usable with most 5 to 10 W transceivers. KXAT100 Wide-Range 100-W ATU with Dual Antenna Jacks. (attaches to KXPA100 module). The item “New Elecraft KX3-F 160-6M Transceiver” is in sale since Tuesday, March 13, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “ssamjung2″ and is located in Frisco, Texas. This item can be shipped to United States.

• Type: Portable/Handheld
• Brand: Elecraft
• Model: KX3
• Frequency Band(s): 6m
• Supported Modes: AM

]]> https://hamradiotransceiver.biz/2018/03/new-elecraft-kx3-f-160-6m-transceiver/feed/ 0 https://hamradiotransceiver.biz/2017/12/yaesu-ft-100d-160-6m-2m70cm-tranceiver/ https://hamradiotransceiver.biz/2017/12/yaesu-ft-100d-160-6m-2m70cm-tranceiver/#comments Thu, 28 Dec 2017 01:04:41 +0000 http://hamradiotransceiver.biz/2017/12/yaesu-ft-100d-160-6m-2m70cm-tranceiver/ read more]]>






THIS IS A USED RADIO THAT WAS TESTED TO POWER ON AND IT DOES. NO FURTHER TESTING DUE TO LACK OF HF ANTENNA AND DUAL BAND ANTENNA. BELOW ARE THE SPECS FOR THE RADIO. 100 Watts HF Output. 50 Watts 2 Meter Output. 20 Watts 440 MHz Output. IF Shift, IF NB. The Yaesu FT-100D built on this success of the widely acclaimed. FT-100, adding the convenience of factory installed modules for the ham on the go. The FT-100D is a miniature mobile transceiver that provides coverage of the 160 to 6 meter bands plus the 144 MHz and 430 MHz bands! The ultra-compact FT-100D has an easy-to-read LCD DISPLAY. This radio combines a unique, user-friendly front panel with high-tech features like DSP to provide performance well above many base stations. And look at the receive coverage: 0.1-76, 108-174 and 420-512 MHz. Refinements include: IF shift, IF NB, dual VFO’s, keyer, 300 memories and CTCSS. Plus you get DSP bandpass filter, notch filter, noise reduction and equalizer. There are dual SO-239 ANTENNA PIGTAILS on the REAR PANEL. Improvements over the original FT-100 version include: TCXO-8 for incredible ±1 PPM stability. Great during digital mode work. XF-117C 500 Hz 8-Pole Crystal filter for superb CW selectivity. FTS-27 CTCSS Decoder Unit for quiet FM monitoring. New larger, high quality speaker for outstanding audio. Only 6.3 x 2.1 x 8.1 inches. 100 kHz – 961 MHz (Cellular blocked). 160 – 6 Meters. 70 Centimeters (Amateur bands only). F1 (9600 bps Packet), F2 (1200 bps Packet), F3 (FM). 100 Hz (FM), 1 kHz (FM). 10 °C to +60 °C (14 F to 122 F). Better than ±(1 kHz +1 ppm) (FM). DC 13.8V ±10 %, Negative Ground. Receive (Squelched) : 1.2A. 6.3″ (W) x 2.2″ (H) x 8.0 (D) (160 x 54 x 205 mm). Early Stage (Low Level). ±5 kHz (±2.5 kHz on FM-N). At least 40 dB down (1.8 – 29.7 MHz). At least 60 dB down (50/144/430 MHz). At least 50 dB down (1.8 – 29.7 MHz). At least 40 dB. At least 50 dB. 400 Hz – 2600 Hz (-6 dB). 200 – 10 k Ohm (Supplied microphone: 2 k Ohm). 150 kHz – 250 kHz (IPO off). 250 kHz – 1.8 MHz (IPO off). 1.8 – 28 MHz (IPO off). 28 – 30 MHz. 50 – 54 MHz. Above specifications are worst-case. 1.8 – 28 MHz. 68.985 MHz (SSB/CW/FM/Digital). 67.980 MHz (W-FM). 11.705 MHz (SSB/CW/FM/Digital). 10.700 MHz (W-FM). Better than 70 dB (1.8 – 30 MHz, 50 – 54 MHz). Better than 60 dB (144 – 148 MHz, 430 – 450 MHz). Better than 70 dB (1.8 – 30 MHz). Better than 60 dB (50 – 54 MHz, 144 – 148 MHz, 430 – 450 MHz). Selectivity (-6 / -60 dB). 2.2 kHz/5.2 kHz. 450 Hz/1.8 kHz. 250 Hz/1.2 kHz (Optional XF-117CN installed). 5.2 kHz/18 kHz (Optional XF-117A installed). 15 kHz /25 kHz (-6 / -50 dB). 4 Ohm – 8 Ohm. The item “YAESU FT-100D 160-6m + 2M/70CM TRANCEIVER” is in sale since Saturday, December 23, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “nycobra50″ and is located in South River, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Taiwan, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, New Zealand, Singapore, Switzerland, Norway, Qatar, Croatia.

• Type: Mobile/In-Vehicle/base
• Brand: Yaesu
• Model: FT-100D
• Frequency Band(s): HF
• Supported Modes: AM
• Band Plan: 160-6M + 2M/70CM

]]> https://hamradiotransceiver.biz/2017/12/yaesu-ft-100d-160-6m-2m70cm-tranceiver/feed/ 0 https://hamradiotransceiver.biz/2016/11/elecraft-kx3-ultra-portable-160-6m-all-mode-transceiver-with-internal-tuner-atu/ https://hamradiotransceiver.biz/2016/11/elecraft-kx3-ultra-portable-160-6m-all-mode-transceiver-with-internal-tuner-atu/#comments Tue, 29 Nov 2016 08:40:32 +0000 http://hamradiotransceiver.biz/2016/11/elecraft-kx3-ultra-portable-160-6m-all-mode-transceiver-with-internal-tuner-atu/ read more]]>













Like new in factory box. Factory built pristine condition, no dust, smoke free house Elecraft KX3. Pics speak for themselves! Will be delivered in original factory boxes. Here’s all of what’s included. Factory Allen wrench. Assessor cables (see in pictures). Batteries not included. The item “ELECRAFT KX3 ULTRA-PORTABLE 160-6M, ALL-MODE TRANSCEIVER with Internal Tuner ATU” is in sale since Sunday, November 27, 2016. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “cwa01″ and is located in North Palm Beach, Florida. This item can be shipped to United States.

• Type: Portable/Handheld
• Model: KX3
• Frequency Band(s): HF
• Brand: ELECRAFT
• MPN: KX3
• UPC: Does not apply

]]> https://hamradiotransceiver.biz/2016/11/elecraft-kx3-ultra-portable-160-6m-all-mode-transceiver-with-internal-tuner-atu/feed/ 0 https://hamradiotransceiver.biz/2016/10/yaesu-ft-2000d-160-6m-200w-transceiver-power-supply-orig-box-manual-mic/ https://hamradiotransceiver.biz/2016/10/yaesu-ft-2000d-160-6m-200w-transceiver-power-supply-orig-box-manual-mic/#comments Wed, 19 Oct 2016 11:14:34 +0000 http://hamradiotransceiver.biz/2016/10/yaesu-ft-2000d-160-6m-200w-transceiver-power-supply-orig-box-manual-mic/ read more]]>













This is an unmodified, stock YAESU FT-2000 “D” It is in very good condition, both operationally and cosmetically. Firmware is the current version… 01.59 Main CPU and 11.54 EDSP. It covers 160 – 6 meters with 200 watts output. It is PRICED TO SELL, as I do not need another rig in the shack! Reason for sale: it was replaced with a new YAESU FTDX-5000. It is from a non-smoking, air conditioned shack. Note: there are some camera artifacts and shadows on some pictures, they are not imperfections on the rig! This radio is difficult to find in this overall condition. It has the reputation in the HAM community of a great rig with very useful features and functions, which make it a pleasure to operate! See the specifications list below. Ships with — FP-2000 Power Supply — Original double box — original operating manual — original CAT control manual — Original MH-31 hand microphone with box + clip — AC power cord. 160 – 6 Meter Coverage, 100 or 200 Watts of Power! Version includes a special memory bank containing the five 60-meter channels, as well. Continuous receiver coverage from 30 kHz to 60 MHz is provided. Note: frequency coverage may differ in your country. Extensive Receiver DSP Filtering! The power of IF Digital Signal Processing (DSP) is yours to enjoy with the FT-2000/D. Variable IF Width and IF Shift allow precise interference rejection, and the receiver DSP also includes an Auto-Notch, Manual Notch, Digital Noise Reduction, and a continuously-variable passband Contour control. The WIDTH control has a mode-determined adjustment range of 200 Hz 4 kHz for SSB, and 25 Hz to 2.4 kHz on CW, and a mode-optimized Narrow key provides one-touch narrowing of the bandwidth to a user-determined preset value. User-Adjustable Variable TX Bandwidth! With the FT-2000/D, you have tremendous control over the fidelity and/or talk power of your SSB signal, thanks to the variable SSB bandwidth capability in the Menu. 3-Band Parametric Microphone Equalizer! The power of DSP also provides tremendous benefits for transmission, as well as reception. The Three-Band Parametric Microphone Equalizer allows unmatched capability to tailor your speech characteristics: in each of the three bands, you may adjust the center frequency of the equalization, the frequency spread over which the equalization is applied, and the amplitude (peaking or nulling) within that equalization range. The result is sparkling, clear audio that will be the envy of everyone else on the band! Following in the renowned path of the FTDX9000, the FT-2000/D is crafted with a comprehensive design view that accounts for all aspects of the strong signal environment, and especially with optimization of weak-signal in a multiple-strong-signal environment. The receiver of the FT-2000/D is a triple-conversion type, utilizing great care in the gain distribution through all IF stages. The first mixer is a GaAs FET Doubly-Balanced Mixer type, fed by a four-VCO PLL synthesizer (30 kHz 10.5 MHz, 10.5 MHz 24 MHz, 24 MHz 39 MHz, and 39 MHz 56 MHz). The resulting first IF is at 69.450 MHz, utilizing an up-conversion technique that yields excellent image rejection. FTDX9000-Lineage Triple Roofing Filter System for Crowded Bands (Main Band VFO). The first IF of the FT-2000/D features three roofing filters, I bandwidths of 15 kHz, 6 kHz, and 3 kHz, optimized by mode for best performance on todays crowded bands. Especially useful during busy contest weekends, the Roofing Filters are positioned right after the first mixer, improving IP3 (3rd-Order Intercept Point) performance for all stages that follow. The Ultimate Low-Band DXer RF Preselection Filter: YAESUs Exclusive µ-Tuning! On the lower Amateur bands, the signal voltages impinging on a receiver can create noise and Intermodulation effects that can cover up weak signals youre trying to pull through. So YAESUs engineers developed the µ (Mu) Tuning system for the FTDX9000, and its now available as an option for the FT-2000/D. Three modules are available (MTU-160, MTU-80/40, MTU-30/20), and these modules may be connected externally with no internal modification required! When µ-Tuning is engaged, the standard VRF (Variable RF Preselector) system is bypassed, but the fixed Bandpass Filters are still in the received signal path. The µ-Tuning filters utilize a stack of large 1.1 (28 mm) Ni-Zn Ferrite cores, driven through a silver-plated coil assembly by a precision stepper motor. The resulting high Q (typically over 300) provides a very steep resonance peak near your operating frequency. The peak may be adjusted away from your frequency, for even greater protection from a specific station, and a graphical depiction of the µ-Tune filter alignment appears on the front panel of the transceiver. Unique Receiver Configuration Display. When operating at a frantic pace, its a comfort to have such comprehensive information available on the front panels huge display. The FT-2000/Ds unique Receiver Configuration Display calls out status for each step in the receivers RF and IF, and the fluorescent display also provides both graphical and numerical depiction of the bandwidth and the alignment of the various interference-rejection filters. And the high-resolution analog multi-meter allows you to monitor PO/COMP/SWR/ID/VDD/ALC both effortlessly and precisely. Dual Receive Capability for Effortless Split Operation. During Split operation, Dual Receive may be engaged so that you may listen to both sides of the pile-up (or watch a particular frequency on the same band for activity). One push of the appropriate [TX] or [RX] indicator will engage or disengage the receiver or transmitter on the Main or Sub VFO, and the [TXW] (TX Watch) button also lets you listen to your transmit frequency during casual Split operation. The Sub Receiver also has a slot for an optional Collins® Mechanical CW filter, if desired: choose the YF-122C (500 Hz) or the YF-122CN (300 Hz). The Sub Receiver is an analog type, with no DSP filters. Enhance Operation using External Display (option)! A wide array of informative and useful displays, identical to those available on the FTDX9000D, can be obtained by adding the optional DMU-2000 Data Management Unit and an after-market display (not supplied). You get an Audio Scope (plus Waterfall) and Oscilloscope, Logging Page, Band Scope, World Clock with Sunrise/Sunset Terminator Display, Swept-frequency SWR display, Memory Channel listing, Rotator Control display with Great Circle Map, and a comprehensive Menu listing, as well. Enjoy the ultimate in operating ease by adding the DMU-2000! Five-Group, 99-Channel memory with 5-Channel Quick Memory Bank (QMB). The 99 memories may be organized into up to five memory groups (up to 20 channels each), and with the addition of the optional DMU-2000 Data Management Unit, you can connect your keyboard (not supplied) and add memory labels (names), edit data, and perform backup and other functions, as well, using an external computer monitor (not supplied). In addition, the one-touch Store (STO) and Recall (RCL) keys allow you instant access to a five-channel Quick Memory Bank that gives you access to five frequencies on a first-in, first-out running basis. A Host of Features for the CW Enthusiast! The front and rear panels have their own key jacks, which may be set up independently for connection of a keyer paddle (for use with the internal keyer), a straight key or bug, or a computer-driven keying interface for use with contest logging software, etc. With the FT-2000/D, you can use both your ears and your eyes to zero in on another CW station. The CW SPOT switch engages a spotting tone that matches the offset of your transmitted signal (as set by the CW Pitch selection), allowing you to match that pitch to that of an incoming signal perfectly. And the CW Tuning Indicator provides a graphical depiction of the tuning process, with a? Marker lighting up when the incoming signal is precisely aligned with yours. Five-Channel Digital Voice Memory and 15-Second Digital RX Recorder. For storage and playback of repetitive messages you have to transmit in a contest, the four-channel Digital Voice Recorder (5 channels when using the optional FH-2 Keypad) will quickly and efficiently let you store CQ, Contest Number, and QRZ messages. On receive, a running 15-second loop recorder lets you stop the recording and play back the just-received audio, so you can confirm a callsign, for example. Huge Precision Main Tuning Dual! The front panels oversized 2.67 (68 mm) Main Tuning Knob is crafted using a brass JISC3604R alloy, for easy flywheel-effect frequency excursions or precision tuning of weak digital signals. The torque of the tuning knob shaft may be adjusted for just the amount of drag you prefer, and all it will take is one spin of the dial for you to know that you are in command of a serious radio! Built-in 100-Memory Automatic Antenna Tuner. The 100 memories of matching-point data allow you to tune around the bands without the need to re-tune as you go. The special antenna tuner memories ensure efficient operation, as well as lightning-fast matching at new operating frequencies, as needed. The Automatic Antenna Tuner has a matching range of 16.7 to 150 Ohms (50 MHz: 25 – 100 Ohms). Personal Computer Control Softwre Available for Free Download! Just go to the “Files” tab in this area, and look for the “PCC-2000-E” Zip File. Download it for free, and enjoy your “virtual front panel” of the FT-2000/D on your computer screen. And Much, Much More. The item “Yaesu FT-2000D 160-6M 200W Transceiver + Power Supply + Orig Box+ Manual- + Mic” is in sale since Monday, October 17, 2016. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “machwarp” and is located in Panama City Beach, Florida. This item can be shipped to United States.

• Type: Base Station
• Brand: Yaesu
• Model: Ft-2000D
• MPN: Does Not Apply

]]> https://hamradiotransceiver.biz/2016/10/yaesu-ft-2000d-160-6m-200w-transceiver-power-supply-orig-box-manual-mic/feed/ 0