NEW Elecraft KX3-F 160-6M Transceiver, Factory Assembled. From what I gather the original owner never took it out of the original packaging and donated it for a good cause. The radio appears to be in MINT condition with all the original packaging. KX3-F – KX3 160-6M Transceiver, Factory Assembled. KXBC3 – Internal NiMH Charger with Real-Time Clock for KX3 (add-in module). KX3 Accessory Cable Set. Hand Microphone for KX3. This is great a little QRP radio with world-class performance. , including the KXPA100 to bring it up to a full 100-watt output. Please let me know if you have any questions or need additional information. 10 W PEP (100 W with KXPA100 amp). Only 1.5 pounds (0.7 kg). Current drain as low as 150 mA. Internal options include wide-range ATU, battery charger, 2-meter module; built-in speaker. Advanced DSP provides dual watch, noise reduction, noise blanking, autonotch, stereo audio effects. Software-defined radio (SDR) architecture plus optional roofing filters for excellent dynamic range. Operates in data modes (PSK31/RTTY) with or without a PC; includes RX I/Q soundcard output. The revolutionary Elecraft KX3 puts the world in the palm of your hand! Despite its small size, it covers all amateur bands from 160-6 meters, operates in all modes, and has DSP-based features usually found only on larger radios. The KX3’s unique form-factor allows you to operate from anywhere. Fold out the rear tilt-feet for use on a desktop or picnic table. For extreme portability, you can add the internal wide-range ATU, 8-AA cell battery pack with NiMH charger, and adjustable KXPD3 keyer paddle. With a whip antenna, you can even operate hand-held. In receive mode, current drain can be as low as 150 mA – about one-half to one-third that of competing all-band portables. Transmit efficiency is also excellent, further improving battery life. Full-Featured, yet Easy to Use. The KX3 features a large front panel with all controls optimized for convenient use. You won’t have to dig through menus to set the power level, adjust the keyer speed, or change filter settings. And the KX3 has the same full-size display as the Elecraft K3, so all operating information is available at a glance. The KX3’s tutorial-style manual explains how and why controls are used, so new hams will be experts in no time. KXPA100 External 100-Watt Amplifier. Our high-performance KXPA100 home/mobile amplifier seamlessly integrates with the KX3 as well as other popular 5- to 10-W transceivers. It has its own internal ATU option (KXAT100) with dual antenna jacks. 160 – 6 meter ham bands; general coverage receive from 1.5 – 32.0 MHz (also covers 0.31 – 1.5 MHz with reduced sensitivity). Ultra-compact size: 3.4″H x 7.4″W x 1.7D; 18 oz. Rear tilt feet fold up for transport. Custom high-contrast LCD with alphanumeric text display. Internal 8 – AA battery holder. Current drain as low as 150 mA in receive mode. High-performance 32-bit floating-point DSP. Built-in PSK/TTY decode/encode allows data mode operation without a PC; transmit in data modes using CW keyer paddle. Low-noise synthesizer with 1-Hz tuning resolution. Firmware updateable via provided application software. Quadrature down-sampling mixer compatible with PC-based SDR (software defined radio) applications. Receiver I/Q outputs for use with PC soundcard. Dual roofing filter option for enhanced dynamic range. (500/1500 Hz analog filters; effective IF b/w of 1000/3000 Hz). Switchable preamp and attenuator. 8-band receive audio equalizer. Dual watch over +/- 15 kHz range; uses applicable roofing filter. Easy-to-use PassBand Tuning (PBT) for shift/width/hicut/locut; roofing filters automatically track DSP filter settings. Automatic and manual notch filtering; adjustable noise reduction and noise blanking; binaural audio effects for enhanced receive. Center-tuning indicator for CW and data modes. Built-in speaker; stereo jack for headphones/external speakers. Adjustable output, 0.1 to 10 W (8 W 12, 10 & 6 M). (100 W with KXPA100 amp). Rugged, SWR and temperature-protected final amplifier stage. Optional MH3 microphone with PTT and UP/DOWN functions. Optional attached keyer paddle with spacing adjustment. Switchable PA output impedance for efficient 5-W or 10-W use. Fast, silent, PIN-diode T-R switching – no relays. DSP RF speech processing for excellent’punch. 8 band equalizer tailors passband to your voice and microphone. Built in digital voice recorder (DVR) with two message buffers. Internal CW keyer with 8-50 WPM range. Six CW/DATA message memories. 100 general-purpose memories store VFOs, modes, etc. Computer control via supplied USB cable or optional RS-232 cables. Full remote-control command set works with most amateur radio software applications (emulates Elecraft K3). Tutorial-style manual ideal for new hams. KXFL3 Roofing Dual Bandwidth Filter for SSB/CW/DATA. KXAT3 Internal, Wide-Range 20-W Automatic Antenna Tuner. (8 – AA NiMH batteries not supplied with KX3; non-rechargeables can also be used in KX3 internal battery holder). KX3-2M Internal 2-Meter Module. H3 Hand Microphone with UP/DN Controls. KXPD3 Attached Precision Keyer Paddle. KXPA100 High-Performance 160-6 meter, External 100-W Amplifier. Also usable with most 5 to 10 W transceivers. KXAT100 Wide-Range 100-W ATU with Dual Antenna Jacks. (attaches to KXPA100 module). The item “New Elecraft KX3-F 160-6M Transceiver” is in sale since Tuesday, March 13, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “ssamjung2″ and is located in Frisco, Texas. This item can be shipped to United States.
- Type: Portable/Handheld
- Brand: Elecraft
- Model: KX3
- Frequency Band(s): 6m
- Supported Modes: AM