This listing is for 1 Icom IC 756 Classic Transceiver in good physical and excellent working condition. It has a few scratches and smudges which is normal for a used rig of this age. All modes and bands work perfectly and put out full power. I have gotten numerous good audio reports just using the HM-36 hand mic. This listing includes: the transceiver, the hand mic, the heavy duty fused power cable, a studio XLR microphone, 1 – 48v phantom power supply to power the boom mic, 1 – clamp on microphone boom, 1 hand switch, 1 radio to boom mic cable (but has the modular jack which will need to be changed over to the standard 8 pin DIN jack). The studio mic and support components are new and have never been used. I recently moved to a new home which has no room for an antenna, so I’m forced to sell my favorite rig. If you have any questions, please feel free to send me a message. No international buyers please. RX: 0.03 – 60.000 MHz 1, 2. 1.800 – 1.999 MHz 2. 3.500 – 3.999 MHz 2. 7.000 – 7.300 MHz 2. 10.100 – 10.150 MHz 2. 14.000 – 14.350 MHz 2. 18.068 – 18.168 MHz 2. 21.000 – 21.450 MHz 2. 24.890 – 24.990 MHz 2. 28.000 – 29.700 MHz 2. 50.000 – 54.000 MHz 2. Bands are not guaranteed. Number of memory channels: 101 (99 regular, 2 scan edges). Antenna connector: SO-239×2 and phono [RCA;(50 ohms)]. Usable temperature range: -10°C to +50°C; +14°F to +122°F. Frequency stability: less than ±0.5 ppm (1 minute after power ON/0°C to +50°C; +32°F to +122°F). Power supply requirement: 13.8 V DC (±15% negative ground). TX max power 20A. RX standby 2.5A typ. RX max audio 2.7A typ. Dimensions (projections not included): 340(W) x 111(H) x 285(D) mm; 13.37(W) x 4.37(H) x 11.22(D) in. Weight: 10.5 kg; 23.1 lb. ACC 1 connector: 8-pin DIN connector. ACC 2 connector: 7-pin DIN connector. CI-V connector: 2-conductor 3.5 (d) mm (1/8). Display: 4.9-inch (diagonal) LCD. Output power (continually adjustable). SSB/CW/RTTY/FM: 2 -100 W. FM: Variable reactance modulation. Spurious emissions: 50 dB (HF bands), 60 dB (50 MHz band). Carrier suppression: 40 dB. Unwanted sideband suppression: 55 dB. Delta TX variable range: ±9.999 kHz. Microphone connector: 8-pin connector (600 ohms). ELE-KEY connector: 3-conductor 6.35 (d) mm (1/4). KEY connector: 3-conductor 6.35 (d) mm (1/4). SEND connector: Phono (RCA). ALC connector: Phono (RCA). Receive system: Triple conversion superheterodyne. SSB, CW, RTTY (at 2.4 kHz BW). FM (at 15 kHz BW). 0.16 µV 1. 0.5 µV 1. 0.13 µV 2. 0.32 µV 2. Squelch sensitivity (Pre-amp OFF). SSB, RTTY, CW: Less than 5.6 µV. FM: Less than 1 µV. SSB, RTTY (BW: 2.4 kHz): More than 2.4 kHz/-6 dB (variable between 50 Hz and 3.6 kHz), Less than 2.8 kHz/-60 dB. CW (BW: 500 Hz): More than 500 Hz/-6 dB (variable between 50 Hz and 3.6 kHz), Less than 700 Hz/-60 dB. FM (BW: 15 kHz): More than 12.0 kHz/-6 dB, Less than 20.0 kHz/-60 dB. Spurious and image rejection ratio: More than 70 dB (except IF through on 50 MHz band). AF output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8 ohm load. RIT variable range: ±9.999 kHz. PHONES connector: 2-pin connector 6.35 (d) mm (1/4). EXT SP connector: 2-pin connector 3.5 (d) mm (1/4)/8 ohms. Specifications are subject to change without notice or obligation. 16.7 – 150 ohms unbalanced 1 (HF bands). 20 – 125 ohms unbalanced 2 (50 MHz band). 1=Less than VSWR 3:1; 2=Less than VSWR 2.5:1. Minimum HF operating input power: 8 Watts. Minimum 6M operating input power: 15 Watts. Tuning accuracy: VSWR 1.5:1 or less. Insertion loss: Less than 1.0 dB (after tuning). The item “Icom IC 756 Radio Transceiver With Extras” is in sale since Sunday, December 04, 2016. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “km4336″ and is located in Cheboygan, Michigan. This item can be shipped to United States.
- Frequency Band(s): HF
- Brand: Icom
- Model: IC 756
- Supported Modes: AM
- Type: Base Station