precision

LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters

LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters
LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters
LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters
LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters
LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters
LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters
LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters
LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters
LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters
LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters
LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters
LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters

LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters
Very Nice LNR Precision LD-11 All Mode 160 – 6 meter with WARC Bands Transceiver. It has been on a couple of hikes and has normal wear. It is very presentable as the pictures show and operates very well. It comes with the LD-11, hand microphone and a copy of the manual. The receiver in this radio is exceptional and rivals my IC-7300. It makes QRP very enjoyable. Here are the Specs from LNR Precision. The HOTTEST new QRP Multimode HF+6M transceiver on the market. 160M to 6M coverage! BUILT-IN Band Scope Feature! 11m CB band in some conditions! The new LD-11is Digital Direct Conversion, SDR type, build-in CPU (SM32a) DSP radio in which RF signals are directly converted to a digital data via differential and balanced A/D converters. This enables direct sampling with extremely low phase and floor noise. The DSP is unique and features two independent channels. It also employs a unique differential algorithm within the software which is applied for IQ processing of the channels with phase suppression of the unwanted side-band channel. The balanced ADC and DAC gives additional noise floor reduction and the receiver can handle interfering signals that are 100 dB stronger than the desired signal at a frequency separation of 10 kHz, and is about 130 dB stronger at 50 kHz separation. As the receiver and transmitter are using the same DSP channel, there is no gap between the receiver performance and the transmitter performance. Thus, there is a clean neighborhood on the bands. At the development stage, our intentions were motivated by the TX side-band noise of existing SDR manufacturers, so our aim was to fully equalize our transmitter to have noise performance that is compatible with the best modern receivers, or even better. After a arduous year of development , we think we achieved it! This 11+ band radio is based on the LD-5, which has proven to be one of the most exciting QRP transceivers introduced in the last few years. Quite frankly, the performance rivals high end units offered by other manufactures at a much lower price point. Our motto is that we make QRP transceivers that you will want to take out in the field (without fear of breaking the bank). 11.5-14.8 VDC. Numbers or Bar indicators on display. Real voltage on display. Select Straight Key or Paddle (built-in Iambic). 0.15uV w/o preamp. 1800 kHz 29.990 MHz HF +50-54MHz 160, 80, 60, 40, 30, 20, 17 and 15, 12, (11), 10, & 6 meter all mode operation. Easy to Find quiet point +/- 24kHz from main frequency. 5W output in CW / SSB. +/- 3 ppm (Si570 defined) typical over 0-50 deg C. 10.5V min to 15V max 350mA receive and 1.5 to 2A typical in transmit. 100 memory storage per band Memorize frequency, mode, VFOs. 4.724L X 3.937W x 1.957H. Mode A and Mode B. The sidetone pitch is automatically set to equal the offset. Automatic Heterodyne filter for SSB from -6 to -40 db. Level of attenuation of the noise from 1 to 50- use minimal necessary. Adjusted in the range from value 4 to 12 readings depending on interference. Break in delay in CW adjustable from 0.1 seconds to 5 seconds. Choose Iambic Mode A or B. VOX Delay adjustable from 0.1 seconds to 5 seconds. VOX GAIN 10-100 10 IS MOST SENSITIVE. SSB EQ 3 band. Bass, treble, middle audio boost on transmit – up to environment and voice. 8 Different filters (incl). 4 of 4 for CW/ SSB – 1-3 factory presets No. 4 adjustable for CW/50-1000Hz/ and SSB/250-3.6KHz. Enable= no monitor Disable= monitor. Maximum switching delay is 12mS and digital delay is 47mS. Take special care to use only approved connectors, proper antennas, 50ohms dummy loads and carefully check voltage and polarity of your 12VDC power supply or battery. Once you verify reception and SWR, then plug in your mic and other accessories. All 3.5mm jacks are stereo jacks. The item “LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters” is in sale since Thursday, March 14, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “steve56″ and is located in New Braunfels, Texas. This item can be shipped to United States.
  • Brand: LNR Precision
  • Supported Modes: CW
  • Mono/Multi Band: Multi
  • Band Plan: 160 – 6 Meters
  • Type: Portable/Handheld

LNR Precision LD-11 QRP SSB CW Radio Transceiver 11 Bands 160 6 Meters