proficio

Proficio_SDR_160M_10M_5W_Built_and_tested_by_Multus_SDR_01_jv

Proficio SDR 160M 10M 5W, Built and tested by Multus SDR

Proficio SDR 160M 10M 5W, Built and tested by Multus SDR

Proficio SDR 160M 10M 5W, Built and tested by Multus SDR
The Proficio is the next generation of Transceivers. It is an all band version (160M – 10M) transceiver. It has all the features of our previous transceiver. 96kHz digital I/Q interface. No additional sound card needed. Only one USB connection is needed. Two tone, 2 kHz spacing, third-order dynamic range: 99 dB. Support for Elecraft T1 automatic antenna tuner. External Amplifier control via AMP port. Firmware Field Updates via on board USB bootloader. Hardrock 50 control when using MSCC. With these additional features. All band. The Proficio covers all bands from 160M to 10M. A RF amplifier is now in the RF front end that provides about 19db of gain at 10M and tapers down to about 0db at 160M. Receive Band Pass Filters for all band groupings (160M, 80M, 40M-60M, 20M-30M, 15M-17M, 12M-10M). The same BPFs are used in conjunction with Low Pass Filters in the transmit path to provide a clean output. 5W Class A PA. Clean output of 5W on all bands (slightly less on 160M and 10M). Supports zero latency CW. Software generated CW is not required. Provides a custom in house produced host application – MSCC. MSCC is custom designed for the Proficio and is recommended when operating the Proficio. We believe our transceiver when used with our MSCC custom host application, is the easiest to use SDR transceiver kit available in amateur radio market. Installing and using our transceiver on your PC is plug and play. There are no cumbersome and confusing configurations to deal with. This is a professionally built and fully tested transceiver. The Proficio is also compatible with all host SDR applications that work with the Basic (HDSDR, Genesis SDR, Quisk and others). The Proficio is supplied as a kit with all SMD devices installed. The customer needs only to install the thru hole components. Specifications: Receive: Continuous from 1.8MHz to 30MHz. (Lower sensitivity below 1.8MHz and between amateur bands) Sensitivity: MDS: Average -123db. 121db on 160M MDS performance specifications for amateur bands only. Transmit: Power Output: 5W, 4W minimum (transmit permitted on amateur bands only). Spurious Emissions: Meets or exceeds FCC requirements (-43db from carrier). Frequency Stability: 1PPM (when using MSCC). This is produced at time of order. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “longbow_mtp” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, Korea, South, Taiwan, South Africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Qatar, Croatia, Republic of, Colombia, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Number of Channels: 10
  • Band: HF
  • Type: Ham Radio Transceiver
  • Band Type: Multiband
  • Brand: Multus SDR, LLC
  • Frequency Range: 1.8 – 29.7 MHz

Proficio SDR 160M 10M 5W, Built and tested by Multus SDR