Icom IC-7600 HF/6M transceiver in Beautiful shape with the Original manual, microphone, and power cord. Has latest firmware installed. Face and cabinet are in Beautiful shape. The Icom IC-7600 provides professional performance in the 160 to 6 meter amateur bands. It utilizes Icom’s proven IF-DSP technology and features selectable roofing filters at 3kHz, 6kHz and 15kHz. Like the IC-7700 and IC-7800, the IC-7600 uses dual 32-bit floating-point Texas Instruments DSP chips with one for the radio other for the spectrum scope. 104dB dynamic range and +30dbm 3rd order intercept point is achieved on the HF bands. It utilizes a double superhet with an image-rejection 2nd mixer circuit providing improved in-band IMD. The 5.8 inch (diagonal) color WQVGA display has a quick-start LED backlight and views well from any angle and you can even program your startup screen. Dual frequency watch is available with same band operation. There is even a RTTY and PSK31 encoder/decoder built-in! The IC-7600 has all the features you would expect are here including PBT, RIT, XIT, keypad, 24 hour clock-timer, 101 memories and multiple scan modes. There is also a built-in voice recorder and voice synthesizer English/Japanese selectable. This radio has two USB ports. The front panel USB port is for keyboard or memory drive (not supplied) and one on the rear panel for PC control and audio. This radio has a six transmit meter functions and three meter display modes. Plus a meter output jack on the rear panel. Enjoy great stability with a built-in TCXO providing 0.5ppm (0 – 50°C). There is both a mechanical relay (16V/0.5A) and FET relay (250V/200mA) for keying external amplifier. Separate RX-OUT and RX-IN antenna ports are provided allowing connection of external preselectors, multicouplers etc. There is also a transverter port. This radio requires 13.8 VDC at 23 amps. RX: 0.03 – 60.000 MHz 1, 2. 1.800 – 1.999 MHz. 3.500 – 3.999 MHz. 5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz. 7.000 – 7.300 MHz. 10.100 – 10.150 MHz 2. 14.000 – 14.350 MHz 2. 18.068 – 18.168 MHz 2. 21.000 – 21.450 MHz 2. 24.890 – 24.990 MHz 2. 28.000 – 29.700 MHz 2. 50.000 – 54.000 MHz 2. Bands are not guaranteed. Number of memory channels: 101 (99 regular, 2 scan edges). Antenna connector: SO-239×2 and phono [RCA;(50 ohms)]. Usable temperature range: 0°C to +50°C; +32°F to +122°F. Frequency stability: less than ±0.5 ppm (1 minute after power ON/0°C to +50°C; +32°F to +122°F). Power supply requirement: 13.8 V DC (±15% negative ground). TX max power 23A. RX standby 3.0A typ. RX max audio 3.5A typ. Dimensions (projections not included): 340(W) x 116(H) x 280(D) mm; 13.37(W) x 4.5(H) x 11.2(D) inches. Weight: 10 kg; 25 lb. ACC 1 connector: 8-pin DIN connector. ACC 2 connector: 7-pin DIN connector. CI-V connector: 2-conductor 3.5 (d) mm (1/8). Display: 5.8 inch (diagonal) TFT color LCD. Output power (continually adjustable). SSB/CW/RTTY/PSK31/FM: 2 – 100 Watts. Spurious emissions: -50 dB (HF bands), -60 dB (50 MHz band). Carrier suppression: 40 dB. Unwanted sideband suppression: 55 dB. Delta TX variable range: ±9.999 kHz. Microphone connector: 8-pin connector (600 ohms). ELE-KEY connector: 3-conductor 6.35 (d) mm (1/4). KEY connector: 3-conductor 6.35 (d) mm (1/4). SEND connector: Phono (RCA). ALC connector: Phono (RCA). Receive system: Double conversion superheterodyne. 1st: 64.455 MHz. Squelch sensitivity (Pre-amp ON). SSB: Less than 3.2 µV. FM: Less than 0.3 µV. Selectivity (representative value, filter shape at SHARP). SSB (BW: 2.4 kHz): More than 2.4 kHz/-6 dB, Less than 2.8 kHz/-60 dB. CW (BW: 500 Hz): More than 500 Hz/-6 dB, Less than 700 Hz/-60 dB. RTTY (BW: 350 Hz): More than 350 Hz/-6 dB, Less than 650 Hz/-60 dB. FM (BW: 15 kHz): More than 12.0 kHz/-6 dB, Less than 20.0 kHz/-60 dB. Spurious and image rejection ratio: More than 70 dB (except IF through on 50 MHz band). AF output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8 ohm load. RIT variable range: ±9.999 kHz. PHONES connector: 2-pin connector 6.35 (d) mm (1/4). EXT SP connector: 2-pin connector 3.5 (d) mm (1/4)/8 ohms. 16.7 – 150 ohms unbalanced 1 (HF bands). 20 – 125 ohms unbalanced 2 (50 MHz band). 1=Less than VSWR 3:1; 2=Less than VSWR 2.5:1. Minimum operating input power: 8 Watts. Tuning accuracy: VSWR 1.5:1 or less. Insertion loss: Less than 1.0 dB(after tuning). The item “Icom IC-7600 HF/6M transceiver in Beautiful shape-latest firmware” is in sale since Friday, February 03, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “hamguy123″ and is located in Hollywood, Florida. This item can be shipped to United States.
- Brand: Icom
- Model: IC-7600
- Frequency Band(s): HF
- Supported Modes: AM