This Eagle was acquired by the former owner who told us that he never used it to transmit. Shortly after acquiring it, he relocated into a townhouse that did not allow use of the transmitter so he only used the unit for receiving for a short while before storage. The unit is in excellent overall cosmetic condition. Please look at our pictures for specific cosmetic condition. Operationally, the receiver portion works with no issues and as designed. We have not tested the transmitter portion, but are offering the unit with this working perfectly and stand behind (guarantee) that the transmitter portion also works perfectly. This transceiver has the auto tuner installed and also the optional 600 Hz filter (see picture). In addition, the Eagle comes with its DC cord plus a 30 amp Astron SS-30 power supply, handheld microphone, user manual, and a CD containing a variety of documents regarding the Eagle transceiver. This is a nice ensemble of transceiver, power supply, options, and documentation. Headphone Jack: 1/4 Stereo, accepts mono or stereo plug. External CW Key Jack: 1/8 Stereo. External Speaker Jack: 1/8 Mono. Aux DC Output Connector: RCA x 2. Frequency Range TX: Ham Bands Only (160-6M). ACC Din Connector: 8. DIN Connector – Line In, Line Out, Aux PTT, Ext Key, Clock/Data/Enable, Ground. DC Power Connector: Power Pole. Fuse: Automotive Blade Style Fuse, 25 Amp 32V. Frequency Range RX: 500 kHz – 30. And 50 – 54MHz. Specifications apply within Amateur Radio bands only. Tuning Step Size: 1, 10, 100, 1000, 10000. Frequency Stability: Maximum +/- 0.5 PPM over operating temperature. Antenna Impedance: 50 ohms nominal. Antenna Connectors: 1 x SO-239 transceive. Supply Voltage Range: 13.8V +/-15%. Range: 0-50 degrees Celsius. Dimensions (H x W x D): 2.9″ x 8.5″ x 10.25 (excluding knobs and connectors). Weight: 7.25 lbs with all options. Construction: Molded plastic front panel, aluminum chassis and texture painted steel covers. PC Control Port: USB (using CCS USB to UART Driver). Display: Custom FSTN monochrome LCD. Display Backlight: 256 colors X 16 intensity levels. SSB Sensitivity: Better than 0.7uV, 2.4khz, 10dB SINAD, preamp off. FM Sensitivity: Better than 2.2uV, 5kHz Dev, 16kHz BW, 10dB SINAD, preamp off. Selectivity IF1: 2.4khz standard, 9.0015. Selectivity IF2: 30 KHz Lowpass filter. IMD3 Dynamic Range: Typical 97dB/20kHz, 95dB/2kHz, 500Hz BW, calculated 2/3(IP3-Noise Floor), preamp off. Noise Floor: Typical -132dBm/500Hz BW/preamp on, -126dBm preamp off. IF Frequencies: 1st:9.0015. 2nd:22.5 kHz, 3rd:0Hz (DSP). IF Rejection: Better than 70dB. 1st IF Image Rejection: Better than 90dB/HF bands, 70dB/6M. 2nd IF Image Rejection: Better than 73dB. Other Spurious Response Rejection: Rejection:>80dB. Other Spurious Response Rejection: Birdies: Typically less than -100dBm equivalent (no more than 5 birdies greater than -100dBm equivalent). Pass Band Tuning: +/- 2.1kHz, 5Hz steps. Small dead zone for centering. Preamp: Nominal 12 db. Audio Output: 2W into 4 ohms, <3% THD. RIT range: +/- 8.2 kHz. RIT Step size: 10Hz. S-Meter Reference: S9 = 50 uV RMS. TX>RX Recovery Time: < 20 ms. RX Headphone Output: Designed for 16-32 ohms impedance headphones. Usable at 8 ohms. AUX Audio Output: 500 mv. Auto Notch: IF DSP, multi-tone. RX Noise Reduction: IF DSP, adjustable. Noise Blanker: Optional daughter board, 2 levels of blanking. RX Current Drain: 1.25 Amps. General Coverage Receive: degraded specs outside ham bands. RF Power Output: Adjustable, 5-100 W, +/- 1 dB. CW/SSB TX Bandwidth: 2.4kHz Filter. FM TX Bandwidth: 15 KHz Optional Filter. Microphone Input Impedance: >10 k-ohms at 1 kHz. Microphone Sensitivity: 1 mV RMS for full power output, internal gain adjustment, 9v dc power for electret elements. FM Deviation: +/- 5 kHz peak nominal. AUX Level Input: variable, 200mV nominal. SSB Carrier Supression: > 70 dB. Unwanted Sideband Suppression: > 60 dB at 1 kHz. CW Keyer Type: Internal Curtis Mode B. CW Rise and Fall Times: 5ms. CW Keyer Speed: 5-60 WPM, adjustable weighting. Current Drain: transmit 20 amps typ. Third Order Intermod: Better than 25dB below peak. SSB Generation: DSP Generated. Matching frequency range: 160 to 10 Meters, no Six Meters. Matching impedance range: 10:1 SWR typical. Filters: 2.4K standard, optional = 300, 600, 1.8k, 6k, 15k (600 Hz filter is included with this unit). Noise Blanker: daughter board module (not installed). Auto Tuner: daughter board module (auto tuner is installed in this unit). The item “Ten-Tec Eagle 599AT HF/6 100 Watt DSP Transceiver withAstron SS-30 & 600 Hz Filter” is in sale since Wednesday, May 10, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “bigapple59″ and is located in Mill Hall, Pennsylvania. This item can be shipped to United States.
- Type: Base Station
- Model: Eagle 599AT
- Brand: TEN-TEC
- MPN: Eagle 599AT
- Frequency Band(s): HF
- Country/Region of Manufacture: United States
- Supported Modes: AM