With the following accessories. FL-223 IF Filter (SSB 1.9KHZ Filter). Tuner Plug to allow for low power tune-up. RMK-706 Remote mounting kit (Never Used). LDG Z-100 Antenna Tuner w/ interface cable to IC-706MKIIG. SignaLink USB Audio soundcard interface with radio interface cable. Radio Data Chart by W7YEN for IC-706MKIIG. Fan Mod Fan runs at slow speed to keep the transceiver constantly cool. This was my “backup/portable” rig but it’s never been portable and I never needed to use it as a backup. So, it has sat in my closet the entire time I’ve had it. Please feel free to contact me with any questions you might have. I also can provide you with additional photographs if needed. I have included the manufacture’s specifications for all of the major items in this package below. 0.030 – 199.999 MHz. 400 – 470 MHz. 1.8 – 1.999 MHz. 3.5 – 3.999 MHz. 7.0 – 7.300 MHz. 10.1 – 10.150 MHz. 14.0 – 14.350 MHz. 18.068 – 18.168 MHz. 21.0 – 21.450 MHz. 24.89 – 24.990 MHz. 28.0 – 29.700 MHz. 50.0 – 54.000 MHz. 144.0 – 148.000 MHz. 430.0 – 450.000 MHz. Varies according to version. Number of memory channels. 107 (99 regular, 6 scan edges, 2 call channels). Antenna connector : SO-239×2 (for HF/50 MHz and 144/430 MHz)/50 ohms. Power supply requirement: 13.8 V ± 15% (negative ground). Frequency stability: Less than ± 7ppm from 1 min. After that rate of stability less than ± 1 ppm/hr. F less than ±5 ppm. Current drain: Transmit max. Power 20 A; Receive standby 1.8 A, max. Audio 2.0 A. Usable temperature range : -10. Dimensions (projections not included). 167(W) X 58(H) X 200(D) mm. 6-9/16(W) X 2-9/32(H) X 7-7/8(D) inches. Weight: 2.45 kg (5 lb 6 oz). CI-V connector: 2 conductor, 3.5 (d) mm (1/8). ACC connector: 13 pin. 5 – 100 W. 2 – 40 W. 2.5 – 50 W. 2 – 20 W. 2 – 8 W. Spurious emissions: Less than -60 dB (below 47.5 MHz: -50dB; 47.5 – 50 MHz: -50 to -60 dB; above 50 MHz: -60 dB). Carrier suppression: More than 40 dB. Unwanted sideband: More than 50 dB. Microphone connector: 8 pin modular jack 600 ohm KEY connector: 3-conductor 6.35 (d) mm (1/4). RTTY connector: 3-conductor 3.5 (d) mm (1/8). 455 kHz (FM only). Receive sensitivity (preamp on, except 4 – 4.5 and 8 – 9 MHz). SSB/CW 10 dB S/N. FM 12 dB SINAD. WFM 12 dB SINAD. 0.5 – 1.8 MHz. 1.8 – 28 MHz. 28 – 29.7 MHz. 76 – 108 MHz. Less than 5.6 µV. Less than 0.3 µV. More than 2.4 kHz/- 6 dB. Less than 4.8 kHz/ -60 dB. More than 8.0 kHz/-6 dB. Less than 30 kHz/-36 dB. More than 12 kHz/-6 dB. Less than 30 kHz/-60 dB. Spurious and image rejection ratio. Audio output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8-ohm load. RIT variable range +/-9.99 kHz. PHONES connector: 3-conductor, 3.5 (d) mm (1/8)/8 ohms. EXT SP connector: 2-conductor, 3.5 (d) mm (1/8)/8 ohms. High efficiency switched “L” tuning network. LED indicators for Status and SWR. Latching relays, holds tune position forever. Optimized, low power consumption tuning algorithm. Tuning time: 0.5 to 6 seconds, 3.0 average. Idle – Nearly zero amps. Tuning – 300 mA max. Voltage requirements: 11 to 18 volts (user supplies power source). 1.8 to 54.0 MHz coverage. Tunes 6 to 800 ohm loads, 10:1 SWR (3:1 SWR on 6 meters). Power range: 0.1 to 125 watts (50 watts on 6 meters). For Dipoles, Verticals, Vees, Beams and Coax Fed Antennas. Optional external Balun allows tuning of random length, long wire or ladder line fed antennas. Enclosure size: 5.5″D x 5.25″W x 1.5H. Power Supply: USB Port Powered Audio Freq Response: 100 Hz – 10 kHz Upper frequency response is intentionally limited by Low Pass Filter. Sampling Size/Rate: 16 Bits, All standard rates are supported up to 48 kHz Computer OS: Windows 98SE, ME, 2000, XP, Vista & Windows 7 MAC OS 9.1 or later MAC OS X 10.00 or later Linux Computer Hardware: This depends on the program that you are running (see your program’s Help or ReadMe file for details). Most communications programs run fine on a 266 MHz or faster Pentium type processor, but some may require a faster computer. Radio In/Out Z: 600 Ohm (nom). TX/RX Levels are fully adjustable for compatibility with Hi-Z and Low-Z radio connections. The item “Icom IC-706MKIIG HF/VHF/UHF Transceiver with LDG Z-100 Autotuner, SignaLink USB” is in sale since Friday, June 16, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “ets1644″ and is located in Newcastle, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Taiwan, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, New Zealand, Singapore, Switzerland, Norway, Qatar, Croatia.
- Frequency Band(s): HF
- Brand: Icom
- Model: IC-706mkiig
- Country/Region of Manufacture: Japan