You ordering SunSDR2-Pro radio from authorized Expert Electronics US dealer and we will help you to get started. Assembled in Taiwan R. The SunSDR2 PRO transceiver is designed for advanced use in HF and VHF bands. Even the most experienced operator will be surprised by its capabilities. The modern hardware and small physical size makes this high performance SDR transceiver the perfect base station while at the same time very portable for field operations. SunSDR2 PRO has a DB15 connector for control of external devices. It allows to connect to it practically any power amplifiers, rotators, narrow band pass filters, etc. With a help of this capability your place can become a professional studio for work in the air. The SunSDR2 PRO is perfect for contesting. Its powerful and flexible software lets you create custom designed station setups for many different types of contest efforts. Separate independent receive path based on Direct Down Conversion principle (DDC). Separate independent transmitter, based on the Direct Up Conversion principle (DUC). Full or half-duplex mode. Antenna switch for 2 antennas in HF. Built-in power-meter and SWR-meter in HF band. External control connector for other devices, 10 powerful keys with open collector. ALC connector for external power amplifiers. Input connector for connecting PTT footswitch. Input connector for connecting CW-key. Output Jack for headphones, impedance 8-1000 Ohm. Microphone input Jack for electret microphone. Microphone connector with PTT switch Yaesu MH-31, which contains microphone, PTT button and 3 additional functional buttons. Protection from polarity reversal. Ethernet LAN interface provides galvanic isolation between transceiver and PC. Transceiver’s calibrations are kept inside the device. No need for primary calibration. Possibility of remote work. PTT footswitch and CW-key are connected to the E-Coder panel, microphone to the PC. Full duplex mode is supported by the transceiver’s hardware, but is not software implemented. This mode will be supported in the future ExpertSDR2 software versions. Radio Amateur HF/VHF transceiver. Remote reception point for contests. Spectrum analyzer with a spectrum scope up to 80MHz. Record air stations with the further reproducing. CPU Intel Core i3 1.6 GHz and higher. Video card, minimum resolution 1024×600, 128 MB, OpenGL 1.5 support and higher. Local network connector 100 Mbps or 1 Gbps. OS Windows XP/7/8 x32 or x64, OS Linux Ubuntu x64. ExpertSDR2 software is used to support SunSDR2 PRO transceiver. Two OS types are supported : Windows XP/Vista/7/8/10 Linux Ubuntu/Kubuntu. Transceiver SunSDR2 PRO configuration. LAN-cable for connecting to local network (1.8m). Power cable for connecting the transceiver to power supply (2m). Audio-adapters JACK 6.3mm to JACK 3.5mm for connecting PC’s headset to transceiver 2 pcs. Software can be downloaded from our web-site. RF Cable MiniUHF-Male to PL259-Female (SO-239) 1Ft (0.3m). General coverage receiver in HF, MHz. General coverage receiver in VHF, MHz. Frequency coverage in HF in TX mode, MHz. Frequency coverage in VHF in TX mode, MHz. Nominal transmitter’s output power HF, W. Nominal transmitter’s output power VHF, W. Blocking dynamic range HF mode (BDR), dB. Blocking dynamic range VHF mode (BDR), dB. RF type of ADC. RF ADC clock frequency, MHz. RF ADC resolution, bit. RF DAC clock frequency, MHz. RF DAC resolution, bit. Recommended power supply, V. Local oscillator’s stability, ppm. Supply voltage range, V. Built-in audio codec resolution, bit. ALC input voltage range, V. Larger amount of modulations can be supported with external software. The SunSDR2-Pro complies with FCC Part 97 rules for the Amateur Radio Service. The item “Expert Electronics SunSDR2-Pro HF and VHF (6 /2M) SDR transceiver” is in sale since Sunday, February 05, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “nsi-new” and is located in Kirkland, Washington. This item can be shipped worldwide.
- Type: Base Station
- Brand: Expert Electronics
- Model: SunSDR2Pro
- Frequency Band(s): HF
- Supported Modes: AM
- Country/Region of Manufacture: Taiwan
- MPN: Does Not Apply
- Band Plan: HF 6m and 2m