I used the radio with a PS-30 that I use regularly with other rigs in the “shack”, so I do not have an extra power cord to sell with this item. I have tested it both on transmit and receive on all bands and actively used it on 75 and 40 meters using dipoles. I made contacts with it to our local Iowa 75-meter (3.970) net as well as on 40 meters to Texas. Signal reports were good. It indicates 100 watts output to my dummy load. Both pilot lamps, the one over the s-meter and tuning dial, work. The digital read-out is working as designed and clear and bright. It does have the folding tilt stand. It DOES have the optional CW filter. It only shows minor scratches on the bezel and cabinet and some minor oxidation on the cabinet. It does not appear to ever have been used in a mobile application. The one deficiency operationally in the rig is, if you happen to turn the rig on while it is in CW mode, it tends to pin the S-meter and not receive. It is not, however, transmitting at that time which is reassuring. If you seldom operate CW it’s likely you will never notice this issue. The item “Kenwood TS-120S HF 80-10 m SSB/CW Ham/Amateur Radio Transceiver Working 100 Watt” is in sale since Saturday, November 30, 2019. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “wsick” and is located in Lorimor, Iowa. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Taiwan, South africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Qatar, Croatia, Antigua and barbuda, Dominica, Grenada, Saint lucia, Barbados, Bermuda, Bolivia, Iceland, Jordan, Liechtenstein, Sri lanka, Luxembourg, Martinique, Maldives, Nicaragua, Oman, Paraguay, Uruguay.
- Model: TS-120S
- Band: HF
- Band Plan: 80-10 (non-WARC)
- Type: Base Station or Mobile
- Supported Modes: CW
- MPN: Does Not Apply
- Brand: Kenwood