The Icom IC-7410 provides professional performance in the 160 to 6 meter amateur bands. This specialized HF rig employs the same high grade DSP unit and double conversion super-heterodyne system developed from the latest technology used in the IC-7600. It features a 15 kHz roofing filter. In addition, when used with the optional FL-430 and FL-431 filters, narrow mode signals are protected from adjacent inband signals. The 3 kHz first IF filter is especially effective in the CW and SSB modes. It utilizes Icom’s proven IF-DSP technology. It features a sharp black and white LCD. In fact, the IC-7410 liquid crystal display. Is actually 10mm wider than the IC-746Pro display. It features a superior general coverage receiver covering 30 kHz to 60 MHz with +30dbm 3rd order intercept point receive performance and ±0.5 p. There is a built-in band scope function, and Baudot RTTY capability. Other refinements include: ±9.999 kHz RIT/XIT, BPF, quick split function, band edge beep and CW keyer (6-48 WPM). A large chassis heat sink. There is a built-in tuner. Power is 100 watts. There are both CI-V and USB ports. On the rear panel. This radio requires 13.8 VDC at 23 Amps. Supplied with HM-36 hand microphone, OPC-1457 DC power cable, MB-123 carry handle, CW key plug, spare fuses and manual. Video Link Showing Operation:: to view copy & paste… 0.030 – 60.000 MHz. 1.800 – 2.000 MHz2. 3.500 – 3.999 MHz2. 7.000 – 7.300 MHz2. 10.100 – 10.150 MHz. 14.000 – 14.350 MHz. 18.068 – 18.168 MHz. 21.000 – 21.450 MHz. 24.890 – 24.990 MHz. 28.000 – 29.700 MHz. 50.000 – 54.000 MHz2. 1 Some frequency ranges not guaranteed. 2 Depending on version. Number of Memory Channels: 101. Antenna Connector: SO-239 x 2 [50 ohm]. Usable Temperature Range: -10°C to +60°C; +14°F to +140°F. Frequency Stability: ± 0.5 p. Power Supply Requirement: 13.8 V DC (±15% negative ground). Current Drain (at 13.8 V DC): Transmit max. Receive standby: 2.2A. Maximum audio: 3.0A. Dimensions (approx): 12.4(W) x 4.7(H) x 13.5(D) inches, (315x117x344 mm), (projections not included). Weight (approx): 22.5 lb. 100W HF+50MHz fixed-station transceiver. +30dBm IP3 class receiver circuitry (HF). Dual-conversion receiver with I/Q image-reject mixer (as employed in IC-7600, IC-7700, IC-7800 and IC-9100). 1st IF: 64.455 MHz. 2nd (final) IF: 36 kHz. Standard 15kHz first IF roofing filter, optional 6kHz/3kHz first IF filters max. 32-bit IF-DSP (at 36kHz IF), the same class as used in the IC-7600, and 24-bit ADC. DSP: ADI ADSP-21369 32-bit floating point 333MHz clock Processing power = 2000MFLOPS. CODEC: AKM AK4620B high-performance ADC/DAC. Dynamic range: ADC 113 dB. TCXO master oscillator: ± 5 X 10-7 frequency stability (0 +50°C). Built-in Antenna Tuner(HF/50 MHz) with motorised air-variable tuning capacitors for accurate matching. Rear-panel USB “B” port supporting CI-V and TX/RX baseband, for direct computer interfacing. Supports RS-BA1 Internet remote-control software suite. Band edge beep alarm helps users avoid off-band operation. Integral RTTY demodulator and decoder. Large B/W LCD screen, ergonomically designed controls. Simple band scope (non-real-time). +13.8V DC primary power. The item “Icom IC 7410 Ham Radio Transceiver Radio withboth Roofing Filters FL-430 & FL-431″ is in sale since Sunday, June 04, 2017. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “compinc” and is located in Roswell, Georgia. This item can be shipped to United States.
- Frequency Band(s): HF
- Supported Modes: AM
- Band Plan: 160 – 6 Meters
- Mono/Multi Band: Multi Band 160 – 6 Meters
- Brand: Icom
- Model: IC 7410
- Type: Base Station