Tag Archives: ic-229h

Used_Icom_IC_229H_2_Meter_FM_50_Watt_Mobile_Transceiver_Free_Ship_01_johk

Used Icom IC-229H 2 Meter FM 50-Watt Mobile Transceiver Free Ship

Used Icom IC-229H 2 Meter FM 50-Watt Mobile Transceiver Free Ship

Used Icom IC-229H 2 Meter FM 50-Watt Mobile Transceiver Free Ship
You are purchasing (1) Used Icom IC-229H – 2 Meter FM 50-Watt Mobile Transceiver. SPECIFICATIONS GENERAL Type: Amateur VHF transceiver Frequency range: USA TX: 144-148 MHz RX: 136-174 MHz Tuning steps: 5 / 10 / 12.5 / 15 / 20 / 25 KHz, 1 MHz Frequency stability: +- 10 ppm Mode: FM Channels / memory management: 20 regular 2 scan edge 1 call RAM storage with lithium battery backup Repeater shift / offset: ±0 to 10 MHz in 25 KHz steps Power supply: 13.8 VDC ±15% Current drain / power consumption: RX: 500-800 mA TX: 4-10.5 A Antenna impedance / connector: 50 ohm / SO-239 (On pigtail) Dimensions (WHD): 14040155 mm (5.51.66.1) Weight: 1 Kg (2.2 lb) Other features: CTCSS/PL encoder (USA version only, optional on other versions) RF attenuator. RECEIVER SECTION Receiver system: Double conversion superheterodyne 1st IF: 17.2 MHz 2nd IF: 455 KHz Sensitivity: 0.16 uV (12 dB SINAD) Selectivity: Image rejection: AF output power / speaker: 2.4 W at 10% distortion / 8 ohm External speaker connector: 3.5 mm, 8 ohm TRANSMITTER SECTION RF output power: HighLow 3Low 2Low 1 2 m: 50 W 25 W 10 W 5 W Modulation system: Variable reactance Max FM deviation (Factory set): ±5 KHz Spurious emissions: Better than -60 dB Microphone impedance / connector: 600 ohm / 8-pin (Metal locking ring connector) Microphone input level.
Used Icom IC-229H 2 Meter FM 50-Watt Mobile Transceiver Free Ship