Looks and works excellent. It was bought from HRO 4/14/2017 with the blue light mod installed. Has a few minor blemishes, see photos for details. New ones are listed for 1400.00 from Ham Radio Outlet. The radio has not been mobile mounted and has had a safe in the shack life. The photos below in the description are from Kenwood and not photos of the the radio you will receive. My photos are of the actual radio listed. Main : 160,80,40,30,20,17,15,12,10,6,2 meter bands, 70,23 (TS-2000X only) cm bands Sub : 2 meter band, 70 cm band. Main : (0.03) 0.5 30 MHz, (30) 50 54 (60)MHz, (142) 144 148 (152), (420) 430 450 MHz, 1240 1300 MHz (TS-2000X only) Sub : (118) 144 148 (174) MHz, (220) 438 450 (512) MHz Figures in parenthesis indicate VFO coverge range. 13.8 V DC ±15%. Current Drain (Less than). Transmit : 20.5 A (HF, 6m, 2m), 18A (70cm), 9A (23cm) Standby : 2.6 A. 14°F – +122°F (-10°C +50°C). Main : Other mode within ±0.5 x 10. (±0.5 ppm) FM TX mode within ±0.5 x 10. ±2kHz Sub : Within ±0.5 x 10. Dimensions, projections not included (W x H x D). 10-5/8 x 3-3/4 x 12-1/2 inch (270 x 96 x 317 mm). TS-2000: 17.19 lbs. (7.8 kg) TS-2000X: 18.07 lbs. Balanced modulation Reactance modulation Low-level modulation. Maximum Frequency Deviation (FM). Less than ±5 kHz (wide) Less than ±2.5 kHz (narrow). 1.8 28MHz: Less than -50dB 50 430MHz : Less than -60dB 1200MHz: Less than -50dB. More than 50 dB. Transmit Frequency Response (SSB). 400 2600 Hz (within -6 dB). 16.7 150 (160 6m Band). Quadruple superheterodyne Triple conversion superheterodyne Double conversio superheterodyne. Intermediate Frequency Main: 1st IF 2nd IF 3rd IF 4th IF Sub: 1st IF 2nd IF. 69.085 MHz or 75.925 MHz (HF 50 MHz) 41.895 MHz (144/440MHz), 135.495 MHz (1200MHz) 10.695 MHz 455 kHz 12.0 kHz 58.525 MHz 455 kHz. Less than 4 µV (500 kHz 1.705 MHz), Less than 0.2 µV (1.705 24.5 MHz), Less than 0.13 µV (24.5 30 MHz), Less than 0.13 µV (50 54 MHz), Less than 0.16 µV (144 148 MHz), Less than 0.11 µV (430 450 MHz), Less than 0.11 µV (1240 1300MHz), Less than 31.6 µV (500 kHz 1.705 MHz), Less than 2 µV (1.705 24.5 MHz), Less than 1.3 µV (24.5 30 MHz), Less than 1.3 µV (50 54 MHz), Less than 1.4 µV (144 148 MHz), Less than 1.0 µV (430 450 MHz), Less than 1.0 µV (1240 1300MHz) Less than 0.22 µV (28 30 MHz), Less than 0.22 µV (50 54 MHz), Less than 0.25 µV (144 148 MHz), Less than 0.18 µV (430 450 MHz), Less than 0.18 µV (1240 1300MHz) Less than 2. 25 µV (144 148 MHz), Less than 1. 55 µV (438 450 MHz) Less than 0. 40 µV (144 148 MHz), Less than 0. 28 µV (438 450 MHz). Less than 18 µV (500 kHz 1.705 MHz), Less than 1. 8 28.7 MHz, Less than 1. 1 µV (50 54 MHz), Less than 1. 1 µV (144 148 MHz), Less than 1. 1 µV (44 0 450 MHz), Less than 1.1 µV (1240 1300MHz) Less than 0.2 µV (28 30 MHz), Less than 0.2 µV (50 54 MHz), Less than 0.16 µV (144 148 MHz), Less than 0.1 µV (430 450 MHz), Less than 0.1 µV (1240 1300MHz) Less than 1. 1 µV (144 148 MHz), Less than 1.1 µV (438 450 MHz) Less than 0.23 µV (144 148 MHz), Less than 0.18 µV (438 450 MHz). Image Rejection Ratio Main / Sub. More than 70 dB / More than 60 dB. IF Rejection Ratio Main / Sub. More than 2.2 kHz (-6 dB), Less than 4.4 kHz (-60 dB) More than 6.0 kHz (-6 dB), Less than 12.0 kHz (-50 dB) More than 12.0 kHz (-6 dB), Less than 25.0 kHz (-50 dB) More than 8. 0 kHz (-6 dB), Less than 20. 0 kHz (-50 dB) More than 12.0 kHz (-6 dB), Less than 25.0 kHz (-50 dB) More than 12.0 kHz (-6 dB), Less than 25.0 kHz (-50 dB). More than 30 dB (1 kHz). More than 40 dB (1 kHz). More than 1.5 W 8 at 10% distortion. IF Digital Signal Processing. The TS-2000/2000X is serious about digital signal processing. KENWOOD’s advanced digital technology converts analog waveforms into digital data in real-time, enabling such digital processing as IF filtering, slope tune, auto notch and AGC. IF-stage DSP on main-band transmit and receive – including V/UHF bands – allows the greatest range of control and unprecedented performance. IF-stage DSP means that the TS-2000/2000X offers significantly lower distortion and higher quality detection in all modes. (FM: digital AF filter). Employing slope tune, you can thus cut out noise with minimal effect on sound quality. In CW mode, the WIDTH function is supplemented by center frequency shirt, allowing adjacent signal interference to be tuned out. The WIDTH function also provides noise reduction caoabilities in FSK with 4 steps available: 250,500,1000 and 1500Hz. And thanks to AF-stage DSP, independent control of high-cut and low-cut frequencies(12 steps each) provides slope tune capability in FM as well. Since it is working with a digital signal, IF Auto North (main band, SSB mode) can provideextremely sharp filterring of carrier frequencies from broadcast and continuous beat sources. The interfering beat is removed far more accurately than in conventional analog systems, and Auto Notch will even track changes in the beat signal (tracking speed can be varied in 5 steps). The digital AGC circuit (main band only) delivers very fast release characteristics, surpassing even the best analog designs. You can select a custom release time (20 steps) for each mode, except FM. AF Digital Signal Processing. DSP is also executed at the AF stage, offering Beat Cancel and CW Auto Tune functions. It also enables you to achieve remarkable noise reduction and apply custom enhancements to your transmitted voice. It works well in combination with IF Auto-Notch (SSB). A new Manual Beat Cancel function, which operates as a manual AF notch, can be used in all modes – though it is particularly effective in CW. You no longer have to adjust the VFO while operating on CW – CW Auto Tune does it for you automatically by adjusting the VFO to your preset pitch at the touch of a button. There are 2 types of noise reduction: LEM (NR1) and SPAC (NR2). The degree of enhancement can also be set manually for mainband use. The SPAC (Speech Processing/Auto Correlation) function utilizes a special statistical/ correlation algorithm to pull out weak signals that are buried deep in noise. Although available for all modes on the main band, it’s especially useful for tough CW conditions. The correlation time setting can be adjusted in 10 steps between 2ms and 20ms. Expanded Power and Performance. DX Cluster (Packet Cluster)Tune. DX cluster information received on the sub band is not just displayed on the LCD: it can also be used for instantly setting up the main band frequency to cluster information. Up to 10 items can be stored in memory. The simple 2-chip TNC is compliant with the AX. 25 protocol for Sky Command and DX cluster tune. Provision of main and sub bands enables dual-channel watch. Satellite operations are enhanced with the IF-DSP, 10 dedicated memory channels, Doppler effect frequency adjustment (manual) and the ability to choose either normal or reverse shift for the trace. But there’s more than just power: the built-in TCXO ensures excellent frequency stability – ±0.5ppm (except in FM mode). Minimum output is 5 watts for HF/50/144/440MHz bands, 1 watt for 1200MHz. In addition to the new Auto Tune function, there is a full range of CW features. The full/semi break-in switching and delay time settings are fully adjustable. In semi break-in the delay time between key release and active receive mode can be set for between 50ms and 1000ms. When using VOX operation the delay time can be set for between 150ms and 3000ms. When operating in FSK mode, you can select shift frequencies (170, 200, 425 and 850Hz) and switch both KEY polarity and Hi/Low tones to suit your RTTY device. Additionally, the FSK reverse function lets you match transmission methods to the other party if necessary, for example changing the BFO frequency from LSB (normal) to USB (reverse). As well as switchable Narrow/Wide deviation modes, the TS-2000/2000X has built-in CTCSS functionality with 38 EIA-standard sub-tones settings plus 1750Hz tone burst. Other features include DCS (104 codes), both crossband and fixed-band repeater operation, and 1200MHz ALT. Packet filter bandwidth is fully selectable to match packet speed, and you can also switch ACC2 (PKD) input/output levels. For PSK31 mode, the menu offers a 100Hz bandwidth IF-DSP filter. The built-in antenna tuner – which also operates when the radio is in receive mode – covers amateur bands from 1.9 to 50MHz, with rapid tuning lock when using presets. This transceiver provides a bank of 300 memories (plus 1 call channel for each band), with 290 assignable by name and 10 available for programmable scan. The scroll function lets you browse memory contents, memory channel copy sends the contents of one channel to another, lock-out memory changes the scan map to exclude certain channels, and memory shift alters the frequency stored in a channel. In addition, there are 10 quick memories to capture a current operation on-the-fly ideal for contest operation. A full range of scan functions is provided, including MHz scan, memory scan, and call scan. Group scan mode covers all 300 memory channels in groups of 10, and programmable band scan will search a frequency spread between two VFO settings (the scan-hold function stops the scanning for 5 seconds). A new feature is programmable slow scan, which will automatically slow down to check a frequency range youre interested in. As well as varying scan speed, you can choose either time-operated (TO) or carrier-operated (CO) busy-stop-resume. All of the power and functions of the TS-2000/2000X can be accessed through the menu-driven display interface on the front panel. You may also activate the Quick Menu feature to access only your most commonly-used functions. Large, blue-colored backlit LCD Backlit front keys Compatible with optional DRU-3A digital recording unit Key operation announcement with optional VS-3 voice synthesizer (option) Programmable function keys Transverter (displays up to 19.99999GHz) RF gain control All-mode squelch Simple visual scan Auto simplex checker Auto repeater offset (144/1200MHz) DTMF remote control Built-in keyer Noise blanker Auto power-off. This is a private person listing, not from a radio mill. The item “KENWOOD TS-2000 HF 6/2 METER AND 70cm (440) DO IT ALL SUPER RADIO no reserve” is in sale since Saturday, January 13, 2018. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “beanie” and is located in Birmingham, Alabama. This item can be shipped to United States.
- Frequency Band(s): HF
- Supported Modes: AM
- Brand: Kenwood
- Type: Base Station
- Model: TS-2000