Yaesu FTM-100DR VHF/UHF C4FM Digital Dual-Band Transceivers offer you exciting new ways to enter Yaesu’s revolutionary world of System Fusion Digital Communications. FTM-100DR transceivers operate in three (3) digital modes and one (1) analog FM mode. V/D Mode (Voice/Data simultaneous communication mode). The digital voice signal is transmitted in one half of the band width. Simultaneously the other half of the 12.5 kHz band width channel is used for error correction of the voice signal and other data. Voice FR mode (Voice Full Rate Mode). This mode uses the full 12.5 kHz bandwidth to transmit digital voice data. Data FR mode (High Speed Data Communication Mode). This high-speed data communication mode uses the full 12.5 kHz bandwidth for data communication. Analog FM is effective when weak signal strength causes audio drop out in the digital mode, and enables communication up to the borderline of the noise level. Transmitter RF Power Output: 50 W/20 W/5 W. Modulation Type: F1D, F2D, F3E: Variable Reactance Modulation, F7W: 4FSK (C4FM). Two large and vibrant multi-colored BUSY/TX LED status indicators clearly show the current operating state of the transceiver; turning green when receiving an analog FM transmission and blue when receiving digital. The top half lights green when in the BUSY/RX state. The top half lights red during transmission. The bottom half lights blue while receiving or transmitting digital voice signals. The bottom half lights white while receiving or transmitting digital data. The bottom half blinks blue when receiving the signal containing a different TONE frequency or DCS code other than the one configured. Built-in 66 channel GPS receiver and antenna provides location, time, and direction of travel and APRS® information. A GPS Logging Function is included. 1200/9600bps APRS® (Automatic Packet Reporting System) Data communication capability included. Voice Guide and Recording Function. Optional Voice Guide Unit (FVS-2) announces your current operating frequency, band change and APRS® messages. You can record up to 5 minutes of received signals, or continuously record the last 30 seconds of received audio. Digital Group Monitor (GM) Function. The digital GM function automatically checks whether members registered to a group are within the simplex communication range, and displays information such as the distance and orientation for each call sign on the screen. The Digital Group Monitor applies to direct communications between members; it is not applicable through a repeater. This is valuable feature for public service group activites, Search and Rescue operations, and any number of other uses limited only by your imagination! 108 999.99 MHz Cellular Blocked (North American model). Transmitter Frequency Range: 144 146 MHz or 144 148 MHz, 430 440 MHz or 430 450 MHz. 500 Memory Channels for each band (A Main) and (B Sub) band. Storage of the Memory channels and personal settings on an inserted micro SD card. By using a micro SD card, it is easy to copy and transfer the radio data to other compatible radios. Versatile Scanning Receiver for Monitoring Enthusiasts VFO Scan, Memory Scan, etc. Timer function: Event timer with Lap or count down functions. Receives and Forwards Digital Image Data (Does not support MH85A11U Camera Microphone). This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “kk6kd” and is located in this country: US. This item can be shipped to United States.
- Brand: Yaesu
- Frequency Range: VHF – UHF
- Type: Ham Radio Transceiver
- Band Type: Dual Band
- Color: Black
- Model: Yaesu FT-100/D
- Band: UHF, VHF
- MPN: Yaesu FT-100/D