Tag Archives: stable

144mhz_432mhz_to_28mhz_for_ICOM_IC_7300_Highly_Stable_Transverter_VHF_UHF_12W_01_sd

144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W

144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W
144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W
144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W
144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W
144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W
144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W
144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W
144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W
144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W
144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W

144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W
High Dynamic Dualband Transverter to ICOM IC-7300 radio with high frequency stability and extended band. Up for sale New Generation of UR3LMZ – dualband transverter for ICOM IC-7300 radio. We have installed a highly stable frequency synthesizer in this model. High frequency stability allows you to work in FM, SSB, CW and even FT8 PSK. This allowed us to obtain a long-term stability of 0.2 ppm and to extend the operating range of the transverter 144 – 150 MHz and 432 – 438 MHz with your ICOM radio frequency 28 – 32 MHz. It is specially developed for severe conditions of reception – contests, DXing, the neighboring powerful broadcasting and amateur stations. The mixer is made on special HI-frequency. With whopping dynamic range. IP3 + 17dBm typ. We made some improvements, improved the circuit, and now the transverter has an output power of 12 watts on VHF and 5 watts on UHF. We specially designed this transverter for easy connection to ICOM IC-7300 radio. You only need a couple of cables to connect to your radio and you can work on VHF/UHF with all kinds of modulation. Contains the input attenuator and the switch of the bypass on the HF antenna. In the bypass mode , the permissible power is 100 watts. When turning the transverter power on , the HF antenna is turned off and the transverter output is connected. The PTT control of the transverter is automatic with RF power. Due to the automatic switching mode of the attenuator when the RF is applied, even a power of 100 watts , randomly applied to the input, will not be dangerous. Then only set the optimal power of 5-10 watts, and that’s it. For SSB, the transmission is held in speech pauses, and the TX to RX after the HF removal is about 0.5 sec. We are offering completely built and tested in UR3LMZ lab assembled transverter that comes with the English description which contains the circuit diagram of this transverter and diagram of how you can connect to your ICOM IC-7300. 116 MHz and 118 MHz to push F+. LO frequency 432Mhz – 404 MHz and 406 MHz to push F+. +/- 0.2 ppm. 12 W on 144 and 5 W on 432. 1.0 dB on 144 and typ 1.5 dB on 432. +13.8 V DC +12… RX Input chip – ADE. Dynamic range IP3 + 17dBm typ. Dimensions (mm) – 90 x 120 x 45mm (3.55 4.75 x 1.6 in). RF sockets type – BNC. USA, Canada 3 weeks. Africa, South America, Asia, Australia 4-6 weeks. We will try our best to solve the problem for you. The item “144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W” is in sale since Thursday, July 22, 2021. This item is in the category “Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Transceivers”. The seller is “andreyfan” and is located in EUROPE. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • Brand: Unbranded

144mhz + 432mhz to 28mhz for ICOM IC-7300 Highly Stable Transverter VHF UHF 12W